[Sun Apr 29 13:48:02 2012] Detection parameters:
  Position = (376.2, 272.0) = 0 57 7.96 -26 19 18.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 143.7 +/- 16.7
  Background counts = 37.8
  Rate = 0.003 +/- 0.0003

[Sun Apr 29 13:48:02 2012] Off-axis axis estimate = 5.95'
[Sun Apr 29 16:28:15 2012] Using EEF radius (= 9.41 ")to estimate initial spatial extent for simple fitting
[Sun Apr 29 16:28:15 2012] Initial guess for spatial extent in simple fitting = 9.41"
[Sun Apr 29 16:28:15 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.058
[Sun Apr 29 16:28:15 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 9.41"
[Sun Apr 29 18:28:22 2012] fullrun_mos1_xmm0504160101_pi300-10000_cl_pass0_src13.ximg exists
[Sun Apr 29 18:28:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504160101_pi300-10000_cl_pass0_src13.csv
[Sun Apr 29 18:28:22 2012] fullrun_mos1_xmm0504160101_pi300-10000_cl_pass0_src13_1.ximg exists
[Sun Apr 29 18:28:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504160101_pi300-10000_cl_pass0_src13.csv
[Sun Apr 29 18:28:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504160101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504160101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 18:28:23 2012] fullrun_mos1_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sun Apr 29 18:28:23 2012] fullrun_mos1_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sun Apr 29 18:28:23 2012] Fit fullrun_mos1_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Sun Apr 29 20:41:16 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 40 at 12.080735 pixels away
[Sun Apr 29 20:41:16 2012] Vigneting correction estimate = 1.000000
[Sun Apr 29 20:41:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr 29 20:41:16 2012] Assessing source extent using major
[Sun Apr 29 20:41:16 2012] Source does appear to be extended
[Sun Apr 29 20:41:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr 29 23:18:31 2012] Using EEF radius (= 9.41 ")to estimate initial spatial extent for simple fitting
[Sun Apr 29 23:18:31 2012] Initial guess for spatial extent in simple fitting = 9.41"
[Sun Apr 29 23:18:31 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.058
[Sun Apr 29 23:18:31 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 9.41"
[Mon Apr 30 00:46:31 2012] fullrun_mos1_xmm0504160101_pi300-10000_cl_pass1_src13.ximg exists
[Mon Apr 30 00:46:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504160101_pi300-10000_cl_pass1_src13.csv
[Mon Apr 30 00:46:31 2012] fullrun_mos1_xmm0504160101_pi300-10000_cl_pass1_src13_1.ximg exists
[Mon Apr 30 00:46:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504160101_pi300-10000_cl_pass1_src13.csv
[Mon Apr 30 00:46:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504160101_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504160101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 00:46:32 2012] fullrun_mos1_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Mon Apr 30 00:46:32 2012] fullrun_mos1_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Mon Apr 30 00:46:32 2012] Fit fullrun_mos1_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Mon Apr 30 02:29:35 2012] Source 40 is offset by -6.930146 and 7.019616 pixels which is larger than
2 X fitted extent = 1.224892 x 1.224892, not incorporating fit results
[Mon Apr 30 02:29:35 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 02:29:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 02:29:35 2012] Assessing source extent using major
[Mon Apr 30 02:29:35 2012] Source does appear to be extended
[Mon Apr 30 02:29:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 05:47:10 2012] XMMSAS src. selection expression = ellipse(32681.453308, 23619.782562, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Apr 30 05:47:10 2012] Writing source region out to fullrun_mos1_xmm0504160101_pi300-10000_pass1_cl_src40_src.reg
[Mon Apr 30 05:47:10 2012] Extracting stamp from image fullrun_mos1_xmm0504160101_pi300-10000_cl_sm2.00.img.gz, (339, 235) - (414, 310)
[Mon Apr 30 05:47:10 2012] XMMSAS bgd. selection expression = annulus(32681.453308, 23619.782562, 1087.500000, 2175.000000, X, Y) && !ellipse(31695.606415, 20875.775269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34170.699066, 22176.362610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33378.188751, 26154.828430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30707.010000, 25453.446000, 1307.024038, 1307.024038, 0.000000, X, Y)
[Mon Apr 30 05:47:10 2012] Writing fullrun_mos1_xmm0504160101_pi300-10000_pass1_cl_src40.gif
[Mon Apr 30 05:49:39 2012] Mean detx,y = (831.94, 5408.73) 
[Mon Apr 30 05:49:40 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Apr 30 05:50:01 2012] Binned source spectrum to 10 counts/bin
[Mon Apr 30 05:50:01 2012] Setting source spectrum file to fullrun_mos1_xmm0504160101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Mon Apr 30 05:50:01 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504160101_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Mon Apr 30 06:20:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Apr 30 06:20:36 2012] rmf not generated due to insufficient counts
[Mon Apr 30 09:03:54 2012] Updating aperture counts using extracted products
[Mon Apr 30 09:03:54 2012] Error reading totcts from fullrun_mos1_xmm0504160101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Mon Apr 30 09:03:56 2012] Calculating source flux in energy range 0.30-8.00
[Mon Apr 30 09:03:56 2012] Using photon index=1.80, rate=0.00295, arf fullrun_mos1_xmm0504160101_pi300-10000_pass1_cl_src40.arf
[Mon Apr 30 09:03:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Apr 30 09:03:56 2012] Updating source flux to 3.5e-14
[Mon Apr 30 09:04:03 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting