[Fri Jun  1 10:27:48 2012] Detection parameters:
  Position = (317.8, 347.1) = 6 0 35.96 -39 57 9.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115.2 +/- 14.7
  Background counts = 31.9
  Rate = 0.003 +/- 0.0004

[Fri Jun  1 10:27:49 2012] Off-axis axis estimate = 3.79'
[Fri Jun  1 11:35:38 2012] Using EEF radius (= 8.33 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 11:35:38 2012] Initial guess for spatial extent in simple fitting = 8.33"
[Fri Jun  1 11:35:38 2012] source mask rpix=1.9, npix_max = 23, mask sum = 17, frac = 0.729
[Fri Jun  1 11:35:38 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 8.33"
[Fri Jun  1 12:05:00 2012] fullrun_mos1_xmm0504140101_pi300-10000_cl_pass0_src5.ximg exists
[Fri Jun  1 12:05:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504140101_pi300-10000_cl_pass0_src5.csv
[Fri Jun  1 12:05:00 2012] fullrun_mos1_xmm0504140101_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Jun  1 12:05:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504140101_pi300-10000_cl_pass0_src5.csv
[Fri Jun  1 12:05:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504140101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504140101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 12:05:01 2012] fullrun_mos1_xmm0504140101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Jun  1 12:05:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504140101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri Jun  1 12:05:01 2012] fullrun_mos1_xmm0504140101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Jun  1 12:05:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504140101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri Jun  1 12:05:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504140101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504140101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 12:42:05 2012] Spatial fit model total counts = 318.355000, observed total counts = 354.000000
[Fri Jun  1 12:42:05 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun  1 12:42:05 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 12:42:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 12:42:05 2012] Assessing source extent using major
[Fri Jun  1 12:42:05 2012] Source does appear to be extended
[Fri Jun  1 12:42:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 13:31:20 2012] Using EEF radius (= 8.33 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 13:31:20 2012] Initial guess for spatial extent in simple fitting = 8.33"
[Fri Jun  1 13:31:20 2012] source mask rpix=1.9, npix_max = 23, mask sum = 17, frac = 0.729
[Fri Jun  1 13:31:20 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 8.33"
[Fri Jun  1 13:56:12 2012] fullrun_mos1_xmm0504140101_pi300-10000_cl_pass1_src4.ximg exists
[Fri Jun  1 13:56:12 2012] fullrun_mos1_xmm0504140101_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Jun  1 13:56:12 2012] Fit fullrun_mos1_xmm0504140101_pi300-10000_cl_pass1_src4 appears to have run properly
[Fri Jun  1 13:56:12 2012] fullrun_mos1_xmm0504140101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Jun  1 13:56:12 2012] fullrun_mos1_xmm0504140101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Jun  1 13:56:12 2012] Fit fullrun_mos1_xmm0504140101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Jun  1 14:36:57 2012] Spatial fit model total counts = 378.656000, observed total counts = 354.000000
[Fri Jun  1 14:36:57 2012] Offset between fit and detection position for source 5 = 0.140741 pixels
[Fri Jun  1 14:36:57 2012] 372.033300 total counts/ 292.047000 bgd. counts: snr = 4.680467
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.140741 pixels
  Position = (317.7, 347.2) = 6 0 36.01 -39 57 8.5
  Extent = 5.1 (3.8-6.2)", rotation angle = 0
  Source counts = 80.0 +/- 19.3
  Background counts = 292.0
  Rate = 0.002 +/- 0.0004
[Fri Jun  1 14:36:57 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 14:36:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 14:36:57 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 14:36:57 2012] Source does appear to be extended
[Fri Jun  1 14:36:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 15:46:35 2012] XMMSAS src. selection expression = ellipse(27588.043400, 30154.518800, 304.039690, 304.039690, 0.000000, X, Y)
[Fri Jun  1 15:46:35 2012] Writing source region out to fullrun_mos1_xmm0504140101_pi300-10000_pass1_cl_src5_src.reg
[Fri Jun  1 15:46:35 2012] Extracting stamp from image fullrun_mos1_xmm0504140101_pi300-10000_cl_sm2.00.img.gz, (300, 330) - (335, 365)
[Fri Jun  1 15:46:35 2012] XMMSAS bgd. selection expression = annulus(27588.043400, 30154.518800, 506.732817, 1013.465633, X, Y)
[Fri Jun  1 15:46:35 2012] Writing fullrun_mos1_xmm0504140101_pi300-10000_pass1_cl_src5.gif
[Fri Jun  1 15:47:25 2012] Mean detx,y = (-5934.36, -909.04) 
[Fri Jun  1 15:47:26 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 15:47:36 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 15:47:36 2012] Setting source spectrum file to fullrun_mos1_xmm0504140101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jun  1 15:47:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504140101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Jun  1 16:01:53 2012] Not generating rmf since there are only 79 counts
[Fri Jun  1 16:01:53 2012] rmf not generated due to insufficient counts
[Fri Jun  1 16:28:23 2012] Updating aperture counts using extracted products
[Fri Jun  1 16:28:23 2012] Error reading totcts from fullrun_mos1_xmm0504140101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jun  1 16:28:23 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 16:28:23 2012] Using photon index=1.80, rate=0.00175, arf fullrun_mos1_xmm0504140101_pi300-10000_pass1_cl_src5.arf
[Fri Jun  1 16:28:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 16:28:23 2012] Updating source flux to 2.9e-14
[Fri Jun  1 16:28:26 2012] Flag p found in src. 5 procflags, skipping spectral fitting
[Fri Jun  1 16:28:26 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting