[Fri Jun  1 10:27:49 2012] Detection parameters:
  Position = (247.3, 245.7) = 6 1 2.65 -40 4 30.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.8 +/- 14.8
  Background counts = 52.0
  Rate = 0.002 +/- 0.0004

[Fri Jun  1 10:27:49 2012] Off-axis axis estimate = 5.32'
[Fri Jun  1 11:35:38 2012] Using EEF radius (= 9.09 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 11:35:38 2012] Initial guess for spatial extent in simple fitting = 9.09"
[Fri Jun  1 11:35:38 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.932
[Fri Jun  1 11:35:38 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 9.09"
[Fri Jun  1 12:05:01 2012] fullrun_mos1_xmm0504140101_pi300-10000_cl_pass0_src18.ximg exists
[Fri Jun  1 12:05:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504140101_pi300-10000_cl_pass0_src18.csv
[Fri Jun  1 12:05:01 2012] fullrun_mos1_xmm0504140101_pi300-10000_cl_pass0_src18_1.ximg exists
[Fri Jun  1 12:05:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504140101_pi300-10000_cl_pass0_src18.csv
[Fri Jun  1 12:05:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504140101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504140101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 12:05:01 2012] fullrun_mos1_xmm0504140101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Fri Jun  1 12:05:01 2012] fullrun_mos1_xmm0504140101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Fri Jun  1 12:05:01 2012] Fit fullrun_mos1_xmm0504140101_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Fri Jun  1 12:42:05 2012] Spatial fit model total counts = 620.849000, observed total counts = 572.000000
[Fri Jun  1 12:42:05 2012] Offset between fit and detection position for source 17 = 2.626005 pixels
[Fri Jun  1 12:42:05 2012] 630.151000 total counts/ 339.328000 bgd. counts: snr = 15.787701
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 2.626005 pixels
  Position = (248.2, 243.2) = 6 1 2.34 -40 4 40.5
  Extent = 18.2 (18.2-18.2)", rotation angle = 0
  Source counts = 290.8 +/- 25.1
  Background counts = 339.3
  Rate = 0.006 +/- 0.0005
[Fri Jun  1 12:42:05 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 12:42:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 12:42:05 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 12:42:05 2012] Source does appear to be extended
[Fri Jun  1 12:42:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 13:31:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  1 13:31:20 2012] Initial guess for spatial extent in simple fitting = 18.18"
[Fri Jun  1 13:31:20 2012] source mask rpix=4.2, npix_max = 87, mask sum = 90, frac = 1.028
[Fri Jun  1 13:31:20 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 18.18"
[Fri Jun  1 13:56:12 2012] fullrun_mos1_xmm0504140101_pi300-10000_cl_pass1_src17.ximg exists
[Fri Jun  1 13:56:12 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0504140101_pi300-10000_cl_pass1_src17.csv
[Fri Jun  1 13:56:12 2012] fullrun_mos1_xmm0504140101_pi300-10000_cl_pass1_src17_1.ximg exists
[Fri Jun  1 13:56:12 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0504140101_pi300-10000_cl_pass1_src17.csv
[Fri Jun  1 13:56:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504140101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504140101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 13:56:12 2012] fullrun_mos1_xmm0504140101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Fri Jun  1 13:56:12 2012] fullrun_mos1_xmm0504140101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Jun  1 13:56:12 2012] Fit fullrun_mos1_xmm0504140101_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Fri Jun  1 14:36:57 2012] Spatial fit model total counts = 1364.910000, observed total counts = 1282.000000
[Fri Jun  1 14:36:57 2012] Offset between fit and detection position for source 17 = 1.890363 pixels
[Fri Jun  1 14:36:57 2012] 1373.414300 total counts/ 1294.500000 bgd. counts: snr = 2.193334
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 1.890363 pixels
  Position = (247.9, 245.1) = 6 1 2.43 -40 4 32.3
  Extent = 9.1 (6.1-14.0)", rotation angle = 0
  Source counts = 78.9 +/- 37.1
  Background counts = 1294.5
  Rate = 0.002 +/- 0.0008
[Fri Jun  1 14:36:57 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 14:36:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 14:36:57 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 14:36:57 2012] Source does appear to be extended
[Fri Jun  1 14:36:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 15:46:35 2012] XMMSAS src. selection expression = ellipse(21519.506400, 21277.188200, 544.271416, 544.271416, 0.000000, X, Y)
[Fri Jun  1 15:46:35 2012] Writing source region out to fullrun_mos1_xmm0504140101_pi300-10000_pass1_cl_src17_src.reg
[Fri Jun  1 15:46:35 2012] Extracting stamp from image fullrun_mos1_xmm0504140101_pi300-10000_cl_sm2.00.img.gz, (217, 214) - (279, 276)
[Fri Jun  1 15:46:35 2012] XMMSAS bgd. selection expression = annulus(21519.506400, 21277.188200, 907.119026, 1814.238052, X, Y)
[Fri Jun  1 15:46:35 2012] Writing fullrun_mos1_xmm0504140101_pi300-10000_pass1_cl_src17.gif
[Fri Jun  1 15:50:25 2012] Mean detx,y = (4765.66, 436.01) 
[Fri Jun  1 15:50:26 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 15:50:35 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 15:50:35 2012] Setting source spectrum file to fullrun_mos1_xmm0504140101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Fri Jun  1 15:50:35 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504140101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Fri Jun  1 16:06:31 2012] Not generating rmf since there are only 78 counts
[Fri Jun  1 16:06:31 2012] rmf not generated due to insufficient counts
[Fri Jun  1 16:28:23 2012] Updating aperture counts using extracted products
[Fri Jun  1 16:28:23 2012] Error reading totcts from fullrun_mos1_xmm0504140101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Fri Jun  1 16:28:23 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 16:28:23 2012] Using photon index=1.80, rate=0.00172, arf fullrun_mos1_xmm0504140101_pi300-10000_pass1_cl_src17.arf
[Fri Jun  1 16:28:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 16:28:23 2012] Updating source flux to 2.1e-14
[Fri Jun  1 16:28:26 2012] Source 17 has fewer than 100.000000 counts, skipping spectral fitting