[Fri Jun  1 10:27:48 2012] Detection parameters:
  Position = (228.7, 385.8) = 6 1 9.66 -39 54 19.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1209.7 +/- 42.8
  Background counts = 41.4
  Rate = 0.04 +/- 0.001

[Fri Jun  1 10:27:49 2012] Off-axis axis estimate = 8.11'
[Fri Jun  1 11:35:38 2012] Using EEF radius (= 10.48 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 11:35:38 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  1 11:35:38 2012] Initial guess for spatial extent in simple fitting = 10.48"
[Fri Jun  1 11:35:38 2012] source mask rpix=2.4, npix_max = 33, mask sum = 31, frac = 0.915
[Fri Jun  1 11:35:38 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.48"
[Fri Jun  1 12:05:00 2012] fullrun_mos1_xmm0504140101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun  1 12:05:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504140101_pi300-10000_cl_pass0_src1.csv
[Fri Jun  1 12:05:00 2012] fullrun_mos1_xmm0504140101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun  1 12:05:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504140101_pi300-10000_cl_pass0_src1.csv
[Fri Jun  1 12:05:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504140101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504140101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 12:05:01 2012] fullrun_mos1_xmm0504140101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun  1 12:05:01 2012] fullrun_mos1_xmm0504140101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun  1 12:05:01 2012] Fit fullrun_mos1_xmm0504140101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jun  1 12:42:05 2012] Spatial fit model total counts = 1761.350000, observed total counts = 1751.000000
[Fri Jun  1 12:42:05 2012] Offset between fit and detection position for source 1 = 0.075174 pixels
[Fri Jun  1 12:42:05 2012] 1750.974000 total counts/ 800.508000 bgd. counts: snr = 33.593383
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.075174 pixels
  Position = (228.6, 385.8) = 6 1 9.69 -39 54 20.2
  Extent = 6.5 (6.0-6.9)", rotation angle = 0
  Source counts = 950.5 +/- 41.8
  Background counts = 800.5
  Rate = 0.02 +/- 0.0009
[Fri Jun  1 12:42:05 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 12:42:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 12:42:05 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 12:42:05 2012] Source does appear to be extended
[Fri Jun  1 12:42:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 13:31:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  1 13:31:20 2012] Initial guess for spatial extent in simple fitting = 6.50"
[Fri Jun  1 13:31:20 2012] source mask rpix=1.5, npix_max = 15, mask sum = 15, frac = 0.944
[Fri Jun  1 13:31:20 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.50"
[Fri Jun  1 13:56:12 2012] fullrun_mos1_xmm0504140101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun  1 13:56:12 2012] fullrun_mos1_xmm0504140101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun  1 13:56:12 2012] Fit fullrun_mos1_xmm0504140101_pi300-10000_cl_pass1_src1 appears to have run properly
[Fri Jun  1 13:56:12 2012] fullrun_mos1_xmm0504140101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun  1 13:56:12 2012] fullrun_mos1_xmm0504140101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun  1 13:56:12 2012] Fit fullrun_mos1_xmm0504140101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun  1 14:36:57 2012] Spatial fit model total counts = 1570.300000, observed total counts = 1577.000000
[Fri Jun  1 14:36:57 2012] Offset between fit and detection position for source 1 = 0.005550 pixels
[Fri Jun  1 14:36:57 2012] 1566.255000 total counts/ 648.510000 bgd. counts: snr = 36.038250
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.005550 pixels
  Position = (228.6, 385.8) = 6 1 9.69 -39 54 20.3
  Extent = 6.3 (5.8-6.7)", rotation angle = 0
  Source counts = 917.7 +/- 39.6
  Background counts = 648.5
  Rate = 0.02 +/- 0.0009
[Fri Jun  1 14:36:57 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 14:36:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 14:36:57 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 14:36:57 2012] Source does appear to be extended
[Fri Jun  1 14:36:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 15:46:35 2012] XMMSAS src. selection expression = ellipse(19838.323600, 33516.501040, 376.297811, 376.297811, 0.000000, X, Y)
[Fri Jun  1 15:46:35 2012] Writing source region out to fullrun_mos1_xmm0504140101_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun  1 15:46:35 2012] Extracting stamp from image fullrun_mos1_xmm0504140101_pi300-10000_cl_sm2.00.img.gz, (207, 364) - (250, 407)
[Fri Jun  1 15:46:35 2012] XMMSAS bgd. selection expression = annulus(19838.323600, 33516.501040, 627.163018, 1254.326036, X, Y)
[Fri Jun  1 15:46:35 2012] Writing fullrun_mos1_xmm0504140101_pi300-10000_pass1_cl_src1.gif
[Fri Jun  1 15:46:38 2012] Mean detx,y = (-5379.61, 7514.59) 
[Fri Jun  1 15:46:39 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 15:46:48 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 15:46:48 2012] Setting source spectrum file to fullrun_mos1_xmm0504140101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun  1 15:46:48 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504140101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun  1 16:28:23 2012] Updating aperture counts using extracted products
[Fri Jun  1 16:28:23 2012] Error reading totcts from fullrun_mos1_xmm0504140101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun  1 16:28:23 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 16:28:23 2012] Using photon index=1.80, rate=0.0201, arf fullrun_mos1_xmm0504140101_pi300-10000_pass1_cl_src1.arf
[Fri Jun  1 16:28:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 16:28:23 2012] Updating source flux to 3.5e-13
[Fri Jun  1 16:29:24 2012] Reading fit data from xmm0504140101/analysis//spectral/fullrun_mos1_xmm0504140101_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jun  1 16:29:24 2012] Spectral fit parameter nH value = 3.27481e+19
[Fri Jun  1 16:29:24 2012] Spectral fit parameter PhoIndex value = 1.82419
[Fri Jun  1 16:29:24 2012] Failed to get F(0.3-8.0) from xmm0504140101/analysis//spectral/fullrun_mos1_xmm0504140101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jun  1 16:29:24 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 16:29:24 2012] Using Nh = 3.3e+19, photon index=1.82, rate=0.0201, arf fullrun_mos1_xmm0504140101_pi300-10000_pass1_cl_src1.arf
[Fri Jun  1 16:29:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 16:29:24 2012] Updating source flux to 3.5e-13