[Sun Jun  2 01:15:00 2013] Detection parameters:
  Position = (116.4, 199.1) = 8 25 41.22 29 53 48.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 37.5 +/- 8.4
  Background counts = 7.2
  Rate = 0.002 +/- 0.0004

[Sun Jun  2 01:15:00 2013] Off-axis axis estimate = 15.03'
[Sun Jun  2 03:08:57 2013] Using EEF radius (= 13.95 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 03:08:57 2013] Initial guess for spatial extent in simple fitting = 13.95"
[Sun Jun  2 03:08:57 2013] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.019
[Sun Jun  2 03:08:57 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 13.95"
[Sun Jun  2 04:05:29 2013] fullrun_mos2_xmm0504102001_pi300-10000_cl_pass0_src22.ximg exists
[Sun Jun  2 04:05:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504102001_pi300-10000_cl_pass0_src22.csv
[Sun Jun  2 04:05:29 2013] fullrun_mos2_xmm0504102001_pi300-10000_cl_pass0_src22_1.ximg exists
[Sun Jun  2 04:05:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504102001_pi300-10000_cl_pass0_src22.csv
[Sun Jun  2 04:05:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504102001_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504102001_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 04:05:29 2013] fullrun_mos2_xmm0504102001_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Sun Jun  2 04:05:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504102001_pi300-10000_cl_pass0_tfrozen_src22.csv
[Sun Jun  2 04:05:29 2013] fullrun_mos2_xmm0504102001_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Sun Jun  2 04:05:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504102001_pi300-10000_cl_pass0_tfrozen_src22.csv
[Sun Jun  2 04:05:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504102001_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504102001_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 04:05:54 2013] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 18.490751 pixels away
[Sun Jun  2 04:05:54 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 04:05:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 04:05:54 2013] Assessing source extent using major
[Sun Jun  2 04:05:54 2013] Source does appear to be extended
[Sun Jun  2 04:05:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 05:56:27 2013] Using EEF radius (= 13.95 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 05:56:27 2013] Initial guess for spatial extent in simple fitting = 13.95"
[Sun Jun  2 05:56:27 2013] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.019
[Sun Jun  2 05:56:27 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 13.95"
[Sun Jun  2 06:47:14 2013] fullrun_mos2_xmm0504102001_pi300-10000_cl_pass1_src22.ximg exists
[Sun Jun  2 06:47:14 2013] fullrun_mos2_xmm0504102001_pi300-10000_cl_pass1_src22_1.ximg exists
[Sun Jun  2 06:47:14 2013] Fit fullrun_mos2_xmm0504102001_pi300-10000_cl_pass1_src22 appears to have run properly
[Sun Jun  2 06:47:15 2013] fullrun_mos2_xmm0504102001_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Sun Jun  2 06:47:15 2013] fullrun_mos2_xmm0504102001_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Sun Jun  2 06:47:15 2013] Fit fullrun_mos2_xmm0504102001_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Sun Jun  2 06:47:39 2013] Spatial fit model total counts = 133.401000, observed total counts = 121.000000
[Sun Jun  2 06:47:39 2013] Poor agreement between spatial fit and data for source 22
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  2 06:47:39 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 06:47:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 06:47:39 2013] Assessing source extent using major
[Sun Jun  2 06:47:39 2013] Source does appear to be extended
[Sun Jun  2 06:47:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 08:12:56 2013] XMMSAS src. selection expression = ellipse(10080.526375, 17273.557632, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun  2 08:12:56 2013] Writing source region out to fullrun_mos2_xmm0504102001_pi300-10000_pass1_cl_src22_src.reg
[Sun Jun  2 08:12:56 2013] Extracting stamp from image fullrun_mos2_xmm0504102001_pi300-10000_cl_sm2.00.img.gz, (79, 162) - (154, 237)
[Sun Jun  2 08:12:56 2013] XMMSAS bgd. selection expression = annulus(10080.526375, 17273.557632, 1087.500000, 2175.000000, X, Y) && !ellipse(10053.720160, 18703.243600, 417.172812, 184.964005, 49.209100, X, Y)
[Sun Jun  2 08:12:56 2013] Writing fullrun_mos2_xmm0504102001_pi300-10000_pass1_cl_src22.gif
[Sun Jun  2 08:22:31 2013] Mean detx,y = (-16045.00, 3561.81) 
[Sun Jun  2 08:22:34 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  2 08:22:51 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  2 08:22:52 2013] Setting source spectrum file to fullrun_mos2_xmm0504102001_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Sun Jun  2 08:22:52 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0504102001_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Sun Jun  2 08:30:25 2013] Not generating rmf since there are only 37 counts
[Sun Jun  2 08:30:25 2013] rmf not generated due to insufficient counts
[Sun Jun  2 08:32:05 2013] Updating aperture counts using extracted products
[Sun Jun  2 08:32:05 2013] Total counts from fullrun_mos2_xmm0504102001_pi300-10000_pass1_cl_src22_src_b10.pi.gz = 84.00
[Sun Jun  2 08:32:05 2013] Total counts from fullrun_mos2_xmm0504102001_pi300-10000_pass1_cl_src22_bgd.pi.gz = 291.00
[Sun Jun  2 08:32:05 2013] Got source and background scale factors 1299850.000000, 6168022.000000
[Sun Jun  2 08:32:05 2013] User source parameters:
  Position = (116.4, 199.1) = 8 25 41.22 29 53 48.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 22.7 +/- 10.2
  Background aperture counts = 61.3
  Rate = 0.001 +/- 0.0004

[Sun Jun  2 08:32:05 2013] Updating counts from extracted products
[Sun Jun  2 08:32:05 2013] Set source signif. to 22.67/7.83 = 2.90
[Sun Jun  2 08:32:07 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  2 08:32:07 2013] Using photon index=1.80, rate=0.00097, arf fullrun_mos2_xmm0504102001_pi300-10000_pass1_cl_src22.arf
[Sun Jun  2 08:32:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  2 08:32:07 2013] Updating source flux to 2.7e-14
[Sun Jun  2 08:32:15 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun  2 08:32:17 2013] xmm0504102001/analysis//spectral/fullrun_mos2_xmm0504102001_pi300-10000_pass1_cl_src22_pl.csv not found, spectral fit skipped or did not complete