[Sat Dec 31 14:48:00 2011] Detection parameters:
  Position = (338.5, 286.8) = 13 46 3.35 64 20 51.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60.8 +/- 10.8
  Background counts = 19.7
  Rate = 0.003 +/- 0.0005

[Sat Dec 31 14:48:00 2011] Off-axis axis estimate = 3.02'
[Sat Dec 31 16:18:14 2011] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Sat Dec 31 16:18:14 2011] Initial guess for spatial extent in simple fitting = 7.94"
[Sat Dec 31 16:18:14 2011] source mask rpix=1.8, npix_max = 21, mask sum = 11, frac = 0.509
[Sat Dec 31 16:18:14 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 7.94"
[Sat Dec 31 17:11:40 2011] fullrun_mos2_xmm0504101501_pi300-10000_cl_pass0_src11.ximg exists
[Sat Dec 31 17:11:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504101501_pi300-10000_cl_pass0_src11.csv
[Sat Dec 31 17:11:40 2011] fullrun_mos2_xmm0504101501_pi300-10000_cl_pass0_src11_1.ximg exists
[Sat Dec 31 17:11:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504101501_pi300-10000_cl_pass0_src11.csv
[Sat Dec 31 17:11:40 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504101501_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504101501_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 17:11:40 2011] fullrun_mos2_xmm0504101501_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sat Dec 31 17:11:40 2011] fullrun_mos2_xmm0504101501_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Dec 31 17:11:40 2011] Fit fullrun_mos2_xmm0504101501_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sat Dec 31 17:11:58 2011] Spatial fit model total counts = 203.000000, observed total counts = 203.000000
[Sat Dec 31 17:11:58 2011] Offset between fit and detection position for source 17 = 0.373104 pixels
[Sat Dec 31 17:11:58 2011] 203.762000 total counts/ 169.126000 bgd. counts: snr = 2.663315
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.373104 pixels
  Position = (338.9, 286.8) = 13 46 3.10 64 20 53.5
  Extent = 4.8 (3.4-6.9)", rotation angle = 0
  Source counts = 34.6 +/- 14.3
  Background counts = 169.1
  Rate = 0.001 +/- 0.0006
[Sat Dec 31 17:11:58 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 17:11:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 17:11:58 2011] Assessing source extent using major axis lower bound
[Sat Dec 31 17:11:58 2011] Source does appear to be extended
[Sat Dec 31 17:11:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 31 18:57:56 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Dec 31 18:57:56 2011] Initial guess for spatial extent in simple fitting = 4.79"
[Sat Dec 31 18:57:56 2011] source mask rpix=1.1, npix_max = 10, mask sum = 4, frac = 0.390
[Sat Dec 31 18:57:56 2011] Skipping simple spatial due to low active detector fraction
[Sat Dec 31 19:43:54 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 19:43:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 19:43:54 2011] Assessing source extent using major axis lower bound
[Sat Dec 31 19:43:54 2011] Source does appear to be extended
[Sat Dec 31 19:43:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 31 20:29:41 2011] XMMSAS src. selection expression = ellipse(29433.109400, 24903.634200, 287.577639, 287.577639, 0.000000, X, Y)
[Sat Dec 31 20:29:41 2011] Writing source region out to fullrun_mos2_xmm0504101501_pi300-10000_pass1_cl_src17_src.reg
[Sat Dec 31 20:29:41 2011] Extracting stamp from image fullrun_mos2_xmm0504101501_pi300-10000_cl_sm2.00.img.gz, (322, 270) - (355, 303)
[Sat Dec 31 20:29:41 2011] XMMSAS bgd. selection expression = annulus(29433.109400, 24903.634200, 479.296066, 958.592132, X, Y)
[Sat Dec 31 20:29:41 2011] Writing fullrun_mos2_xmm0504101501_pi300-10000_pass1_cl_src17.gif
[Sat Dec 31 20:34:31 2011] Mean detx,y = (-810.29, -4696.71) 
[Sat Dec 31 20:34:33 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 31 20:34:46 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 31 20:34:46 2011] Setting source spectrum file to fullrun_mos2_xmm0504101501_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Dec 31 20:34:46 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504101501_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sat Dec 31 20:51:56 2011] Not generating rmf since there are only 34 counts
[Sat Dec 31 20:51:56 2011] rmf not generated due to insufficient counts
[Sat Dec 31 20:53:32 2011] Updating aperture counts using extracted products
[Sat Dec 31 20:53:32 2011] Error reading totcts from fullrun_mos2_xmm0504101501_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Dec 31 20:53:33 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 20:53:33 2011] Using photon index=1.80, rate=0.00143, arf fullrun_mos2_xmm0504101501_pi300-10000_pass1_cl_src17.arf
[Sat Dec 31 20:53:33 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 20:53:33 2011] Updating source flux to 1.7e-14
[Sat Dec 31 20:53:46 2011] Source 17 has fewer than 100.000000 counts, skipping spectral fitting