[Sun Jul 15 10:15:53 2012] Detection parameters:
  Position = (289.3, 276.9) = 8 0 21.11 26 36 48.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4502.4 +/- 79.2
  Background counts = 9.6
  Rate = 0.2 +/- 0.004

[Sun Jul 15 10:15:54 2012] Off-axis axis estimate = 1.70'
[Sun Jul 15 11:25:29 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 11:25:29 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Sun Jul 15 11:25:29 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Sun Jul 15 11:25:29 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Sun Jul 15 11:53:34 2012] fullrun_mos2_xmm0504101201_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jul 15 11:53:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504101201_pi300-10000_cl_pass0_src1.csv
[Sun Jul 15 11:53:34 2012] fullrun_mos2_xmm0504101201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jul 15 11:53:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504101201_pi300-10000_cl_pass0_src1.csv
[Sun Jul 15 11:53:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504101201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504101201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 11:53:35 2012] fullrun_mos2_xmm0504101201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jul 15 11:53:35 2012] fullrun_mos2_xmm0504101201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jul 15 11:53:35 2012] Fit fullrun_mos2_xmm0504101201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jul 15 11:53:47 2012] Spatial fit model total counts = 4265.720000, observed total counts = 4071.000000
[Sun Jul 15 11:53:47 2012] Offset between fit and detection position for source 3 = 0.106121 pixels
[Sun Jul 15 11:53:47 2012] 4235.850000 total counts/ 1081.520000 bgd. counts: snr = 95.915733
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.106121 pixels
  Position = (289.4, 276.8) = 8 0 21.09 26 36 48.5
  Extent = 5.5 (5.3-5.6)", rotation angle = 0
  Source counts = 3154.3 +/- 65.1
  Background counts = 1081.5
  Rate = 0.1 +/- 0.003
[Sun Jul 15 11:53:47 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 11:53:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 11:53:47 2012] Assessing source extent using major axis lower bound
[Sun Jul 15 11:53:47 2012] Source does appear to be extended
[Sun Jul 15 11:53:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 13:02:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jul 15 13:02:58 2012] Initial guess for spatial extent in simple fitting = 5.46"
[Sun Jul 15 13:02:58 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.973
[Sun Jul 15 13:02:58 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.46"
[Sun Jul 15 13:27:24 2012] fullrun_mos2_xmm0504101201_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jul 15 13:27:24 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504101201_pi300-10000_cl_pass1_src1.csv
[Sun Jul 15 13:27:24 2012] fullrun_mos2_xmm0504101201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jul 15 13:27:24 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504101201_pi300-10000_cl_pass1_src1.csv
[Sun Jul 15 13:27:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504101201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504101201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 13:27:24 2012] fullrun_mos2_xmm0504101201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jul 15 13:27:24 2012] fullrun_mos2_xmm0504101201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jul 15 13:27:24 2012] Fit fullrun_mos2_xmm0504101201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jul 15 13:27:35 2012] Spatial fit model total counts = 4263.520000, observed total counts = 4065.000000
[Sun Jul 15 13:27:35 2012] Offset between fit and detection position for source 3 = 0.014556 pixels
[Sun Jul 15 13:27:35 2012] 4255.180000 total counts/ 1092.140000 bgd. counts: snr = 95.711810
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.014556 pixels
  Position = (289.4, 276.8) = 8 0 21.09 26 36 48.5
  Extent = 5.5 (5.3-5.6)", rotation angle = 0
  Source counts = 3163.0 +/- 65.2
  Background counts = 1092.1
  Rate = 0.1 +/- 0.003
[Sun Jul 15 13:27:35 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 13:27:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 13:27:35 2012] Assessing source extent using major axis lower bound
[Sun Jul 15 13:27:35 2012] Source does appear to be extended
[Sun Jul 15 13:27:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 14:22:21 2012] Counts = 3163.040000, rescaling region sizes by 2.000000
[Sun Jul 15 14:22:22 2012] XMMSAS src. selection expression = ellipse(25127.812000, 24033.265600, 654.900019, 654.900019, 0.000000, X, Y)
[Sun Jul 15 14:22:22 2012] Writing source region out to fullrun_mos2_xmm0504101201_pi300-10000_pass1_cl_src3_src.reg
[Sun Jul 15 14:22:22 2012] Extracting stamp from image fullrun_mos2_xmm0504101201_pi300-10000_cl_sm2.00.img.gz, (252, 239) - (327, 314)
[Sun Jul 15 14:22:22 2012] XMMSAS bgd. selection expression = annulus(25127.812000, 24033.265600, 2183.000063, 4366.000126, X, Y) && !ellipse(26644.520800, 21116.576000, 453.289613, 453.289613, 0.000000, X, Y) && !ellipse(22159.967800, 20894.542600, 390.581611, 390.581611, 0.000000, X, Y) && !ellipse(29427.392200, 24751.167200, 777.441622, 273.643208, 118.528000, X, Y) && !ellipse(28735.764400, 26573.160800, 375.234411, 375.234411, 0.000000, X, Y)
[Sun Jul 15 14:22:22 2012] Writing fullrun_mos2_xmm0504101201_pi300-10000_pass1_cl_src3.gif
[Sun Jul 15 14:22:24 2012] Mean detx,y = (75.32, 80.86) 
[Sun Jul 15 14:22:25 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 15 14:22:39 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 15 14:22:39 2012] Setting source spectrum file to fullrun_mos2_xmm0504101201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jul 15 14:22:39 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504101201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Jul 15 14:35:41 2012] Updating aperture counts using extracted products
[Sun Jul 15 14:35:41 2012] Error reading totcts from fullrun_mos2_xmm0504101201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jul 15 14:35:41 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 14:35:41 2012] Using photon index=1.80, rate=0.146, arf fullrun_mos2_xmm0504101201_pi300-10000_pass1_cl_src3.arf
[Sun Jul 15 14:35:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 14:35:41 2012] Updating source flux to 1.5e-12
[Sun Jul 15 14:36:34 2012] Reading fit data from xmm0504101201/analysis//spectral/fullrun_mos2_xmm0504101201_pi300-10000_pass1_cl_src3_pl.csv
[Sun Jul 15 14:36:34 2012] Spectral fit parameter nH value = 7.037e+21
[Sun Jul 15 14:36:34 2012] Spectral fit parameter PhoIndex value = 1.06839
[Sun Jul 15 14:36:34 2012] Failed to get F(0.3-8.0) from xmm0504101201/analysis//spectral/fullrun_mos2_xmm0504101201_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sun Jul 15 14:36:34 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 14:36:34 2012] Using Nh = 7e+21, photon index=1.07, rate=0.146, arf fullrun_mos2_xmm0504101201_pi300-10000_pass1_cl_src3.arf
[Sun Jul 15 14:36:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 14:36:34 2012] Updating source flux to 3.1e-12