[Wed Dec 21 02:25:53 2011] Detection parameters:
  Position = (311.2, 218.5) = 11 35 38.23 56 52 52.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.1 +/- 9.8
  Background counts = 19.5
  Rate = 0.003 +/- 0.0007

[Wed Dec 21 02:25:53 2011] Off-axis axis estimate = 5.87'
[Wed Dec 21 02:30:33 2011] Using EEF radius (= 9.36 ")to estimate initial spatial extent for simple fitting
[Wed Dec 21 02:30:33 2011] Initial guess for spatial extent in simple fitting = 9.36"
[Wed Dec 21 02:30:33 2011] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.888
[Wed Dec 21 02:30:33 2011] Giving source the simple spatial ID 39 for pass 0, mean size = 9.36"
[Wed Dec 21 04:45:00 2011] fullrun_pn_xmm0504101001_pi300-10000_cl_pass0_src39.ximg exists
[Wed Dec 21 04:45:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504101001_pi300-10000_cl_pass0_src39.csv
[Wed Dec 21 04:45:00 2011] fullrun_pn_xmm0504101001_pi300-10000_cl_pass0_src39_1.ximg exists
[Wed Dec 21 04:45:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504101001_pi300-10000_cl_pass0_src39.csv
[Wed Dec 21 04:45:00 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504101001_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504101001_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 21 04:45:01 2011] fullrun_pn_xmm0504101001_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Wed Dec 21 04:45:01 2011] fullrun_pn_xmm0504101001_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Wed Dec 21 04:45:01 2011] Fit fullrun_pn_xmm0504101001_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Wed Dec 21 07:30:17 2011] Spatial fit model total counts = 1457.060000, observed total counts = 1460.000000
[Wed Dec 21 07:30:17 2011] Offset between fit and detection position for source 40 = 0.727022 pixels
[Wed Dec 21 07:30:17 2011] Warning, changing simple spatial fit ID from 39 to 1
[Wed Dec 21 07:30:17 2011] 1483.000000 total counts/ 1483.000000 bgd. counts: snr = 0.000000
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.727022 pixels
  Position = (311.8, 218.2) = 11 35 37.90 56 52 54.0
  Extent = 2.3" x 2.3", rotation angle = 0
  Source counts = 0.0 +/- 38.5
  Background counts = 1483.0
  Rate = 2e-11 +/- 0.002
  Deleting source due to low Poisson probability