[Thu Jan  5 10:40:49 2012] Detection parameters:
  Position = (402.8, 429.4) = 11 56 18.48 52 56 54.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 94.1 +/- 13.9
  Background counts = 24.8
  Rate = 0.004 +/- 0.0006

[Thu Jan  5 10:40:51 2012] Off-axis axis estimate = 12.14'
[Thu Jan  5 10:44:57 2012] Using EEF radius (= 12.50 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 10:44:57 2012] Initial guess for spatial extent in simple fitting = 12.50"
[Thu Jan  5 10:44:57 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.077
[Thu Jan  5 10:44:57 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 12.50"
[Thu Jan  5 12:41:45 2012] fullrun_pn_xmm0504100901_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jan  5 12:41:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504100901_pi300-10000_cl_pass0_src3.csv
[Thu Jan  5 12:41:45 2012] fullrun_pn_xmm0504100901_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jan  5 12:41:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504100901_pi300-10000_cl_pass0_src3.csv
[Thu Jan  5 12:41:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504100901_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504100901_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 12:41:46 2012] fullrun_pn_xmm0504100901_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jan  5 12:41:46 2012] fullrun_pn_xmm0504100901_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jan  5 12:41:46 2012] Fit fullrun_pn_xmm0504100901_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Jan  5 14:46:17 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 15.631565 pixels away
[Thu Jan  5 14:46:17 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 14:46:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 14:46:17 2012] Assessing source extent using major
[Thu Jan  5 14:46:17 2012] Source does appear to be extended
[Thu Jan  5 14:46:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 14:46:48 2012] Using EEF radius (= 12.50 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 14:46:48 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jan  5 14:46:48 2012] Initial guess for spatial extent in simple fitting = 12.50"
[Thu Jan  5 14:46:48 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.077
[Thu Jan  5 14:46:48 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 12.50"
[Thu Jan  5 16:29:01 2012] fullrun_pn_xmm0504100901_pi300-10000_cl_pass1_src3.ximg exists
[Thu Jan  5 16:29:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504100901_pi300-10000_cl_pass1_src3.csv
[Thu Jan  5 16:29:01 2012] fullrun_pn_xmm0504100901_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Jan  5 16:29:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504100901_pi300-10000_cl_pass1_src3.csv
[Thu Jan  5 16:29:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504100901_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504100901_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 16:29:02 2012] fullrun_pn_xmm0504100901_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Jan  5 16:29:02 2012] fullrun_pn_xmm0504100901_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Jan  5 16:29:02 2012] Fit fullrun_pn_xmm0504100901_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Jan  5 18:07:38 2012] Spatial fit model total counts = 615.625000, observed total counts = 616.000000
[Thu Jan  5 18:07:38 2012] Offset between fit and detection position for source 3 = 0.364005 pixels
[Thu Jan  5 18:07:38 2012] 616.216100 total counts/ 549.257000 bgd. counts: snr = 2.857076
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.364005 pixels
  Position = (402.4, 429.5) = 11 56 18.65 52 56 54.0
  Extent = 5.8 (4.2-8.2)", rotation angle = 0
  Source counts = 67.0 +/- 24.8
  Background counts = 549.3
  Rate = 0.003 +/- 0.001
[Thu Jan  5 18:07:38 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 18:07:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 18:07:38 2012] Assessing source extent using major axis lower bound
[Thu Jan  5 18:07:38 2012] Source does appear to be extended
[Thu Jan  5 18:07:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 18:08:07 2012] XMMSAS src. selection expression = ellipse(34963.173840, 37317.851736, 347.464210, 347.464210, 0.000000, X, Y)
[Thu Jan  5 18:08:07 2012] Writing source region out to fullrun_pn_xmm0504100901_pi300-10000_pass1_cl_src3_src.reg
[Thu Jan  5 18:08:07 2012] Extracting stamp from image fullrun_pn_xmm0504100901_pi300-10000_cl_sm2.00.img.gz, (382, 410) - (422, 449)
[Thu Jan  5 18:08:07 2012] XMMSAS bgd. selection expression = annulus(34963.173840, 37317.851736, 579.107017, 1158.214033, X, Y)
[Thu Jan  5 18:08:07 2012] Writing fullrun_pn_xmm0504100901_pi300-10000_pass1_cl_src3.gif
[Thu Jan  5 18:10:12 2012] Mean detx,y = (10608.70, -7213.83) 
[Thu Jan  5 18:10:15 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan  5 18:10:28 2012] Binned source spectrum to 10 counts/bin
[Thu Jan  5 18:10:28 2012] Setting source spectrum file to fullrun_pn_xmm0504100901_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Jan  5 18:10:28 2012] Setting bgd. spectrum file to fullrun_pn_xmm0504100901_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Jan  5 18:46:15 2012] Not generating rmf since there are only 66 counts
[Thu Jan  5 18:46:15 2012] rmf not generated due to insufficient counts
[Thu Jan  5 19:54:46 2012] Updating aperture counts using extracted products
[Thu Jan  5 19:54:46 2012] Error reading totcts from fullrun_pn_xmm0504100901_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Jan  5 19:54:48 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan  5 19:54:48 2012] Using photon index=1.80, rate=0.00285, arf fullrun_pn_xmm0504100901_pi300-10000_pass1_cl_src3.arf
[Thu Jan  5 19:54:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan  5 19:54:48 2012] Updating source flux to 1.7e-14
[Thu Jan  5 19:55:28 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Jan  5 19:57:07 2012] xmm0504100901/analysis//spectral/fullrun_pn_xmm0504100901_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete