[Thu Jan  5 10:42:13 2012] Detection parameters:
  Position = (305.7, 321.1) = 11 57 5.23 52 49 3.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 294.0 +/- 20.8
  Background counts = 9.6
  Rate = 0.01 +/- 0.0009

[Thu Jan  5 10:42:14 2012] Off-axis axis estimate = 1.73'
[Thu Jan  5 13:44:08 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 13:44:08 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Thu Jan  5 13:44:08 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.056
[Thu Jan  5 13:44:08 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Thu Jan  5 14:46:03 2012] fullrun_mos2_xmm0504100901_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jan  5 14:46:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504100901_pi300-10000_cl_pass0_src1.csv
[Thu Jan  5 14:46:03 2012] fullrun_mos2_xmm0504100901_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jan  5 14:46:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504100901_pi300-10000_cl_pass0_src1.csv
[Thu Jan  5 14:46:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504100901_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504100901_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 14:46:03 2012] fullrun_mos2_xmm0504100901_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jan  5 14:46:03 2012] fullrun_mos2_xmm0504100901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jan  5 14:46:03 2012] Fit fullrun_mos2_xmm0504100901_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jan  5 14:46:32 2012] Spatial fit model total counts = 346.000000, observed total counts = 346.000000
[Thu Jan  5 14:46:32 2012] Offset between fit and detection position for source 1 = 0.202760 pixels
[Thu Jan  5 14:46:32 2012] 349.374000 total counts/ 158.949000 bgd. counts: snr = 15.104107
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.202760 pixels
  Position = (305.5, 321.2) = 11 57 5.32 52 49 3.7
  Extent = 4.8 (4.1-5.3)", rotation angle = 0
  Source counts = 190.4 +/- 18.7
  Background counts = 158.9
  Rate = 0.008 +/- 0.0007
[Thu Jan  5 14:46:32 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 14:46:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 14:46:32 2012] Assessing source extent using major axis lower bound
[Thu Jan  5 14:46:32 2012] Source does appear to be extended
[Thu Jan  5 14:46:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 17:16:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan  5 17:16:24 2012] Initial guess for spatial extent in simple fitting = 4.78"
[Thu Jan  5 17:16:24 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.881
[Thu Jan  5 17:16:24 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.78"
[Thu Jan  5 18:07:24 2012] fullrun_mos2_xmm0504100901_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jan  5 18:07:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504100901_pi300-10000_cl_pass1_src1.csv
[Thu Jan  5 18:07:24 2012] fullrun_mos2_xmm0504100901_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jan  5 18:07:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504100901_pi300-10000_cl_pass1_src1.csv
[Thu Jan  5 18:07:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504100901_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504100901_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 18:07:24 2012] fullrun_mos2_xmm0504100901_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jan  5 18:07:24 2012] fullrun_mos2_xmm0504100901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jan  5 18:07:24 2012] Fit fullrun_mos2_xmm0504100901_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jan  5 18:07:51 2012] Spatial fit model total counts = 345.999000, observed total counts = 346.000000
[Thu Jan  5 18:07:51 2012] Offset between fit and detection position for source 1 = 0.000175 pixels
[Thu Jan  5 18:07:51 2012] 349.375000 total counts/ 159.035000 bgd. counts: snr = 15.093283
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000175 pixels
  Position = (305.5, 321.2) = 11 57 5.32 52 49 3.7
  Extent = 4.8 (4.1-5.3)", rotation angle = 0
  Source counts = 190.3 +/- 18.7
  Background counts = 159.0
  Rate = 0.008 +/- 0.0007
[Thu Jan  5 18:07:51 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 18:07:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 18:07:51 2012] Assessing source extent using major axis lower bound
[Thu Jan  5 18:07:51 2012] Source does appear to be extended
[Thu Jan  5 18:07:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 19:37:08 2012] XMMSAS src. selection expression = ellipse(26528.891000, 27899.846800, 286.261208, 286.261208, 0.000000, X, Y)
[Thu Jan  5 19:37:08 2012] Writing source region out to fullrun_mos2_xmm0504100901_pi300-10000_pass1_cl_src1_src.reg
[Thu Jan  5 19:37:08 2012] Extracting stamp from image fullrun_mos2_xmm0504100901_pi300-10000_cl_sm2.00.img.gz, (289, 305) - (322, 338)
[Thu Jan  5 19:37:08 2012] XMMSAS bgd. selection expression = annulus(26528.891000, 27899.846800, 477.102014, 954.204027, X, Y) && !ellipse(27211.516815, 28676.068146, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jan  5 19:37:08 2012] Writing fullrun_mos2_xmm0504100901_pi300-10000_pass1_cl_src1.gif
[Thu Jan  5 19:37:12 2012] Mean detx,y = (102.86, 139.22) 
[Thu Jan  5 19:37:14 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan  5 19:37:28 2012] Binned source spectrum to 10 counts/bin
[Thu Jan  5 19:37:28 2012] Setting source spectrum file to fullrun_mos2_xmm0504100901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jan  5 19:37:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504100901_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jan  5 19:54:52 2012] Updating aperture counts using extracted products
[Thu Jan  5 19:54:52 2012] Error reading totcts from fullrun_mos2_xmm0504100901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jan  5 19:54:54 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan  5 19:54:54 2012] Using photon index=1.80, rate=0.00754, arf fullrun_mos2_xmm0504100901_pi300-10000_pass1_cl_src1.arf
[Thu Jan  5 19:54:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan  5 19:54:54 2012] Updating source flux to 9.6e-14
[Thu Jan  5 19:55:28 2012] Reading fit data from xmm0504100901/analysis//spectral/fullrun_mos2_xmm0504100901_pi300-10000_pass1_cl_src1_pl.csv
[Thu Jan  5 19:55:28 2012] Spectral fit parameter nH value = 1.45981e+14
[Thu Jan  5 19:55:28 2012] Spectral fit parameter PhoIndex value = 2.2256
[Thu Jan  5 19:55:28 2012] Failed to get F(0.3-8.0) from xmm0504100901/analysis//spectral/fullrun_mos2_xmm0504100901_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Jan  5 19:55:28 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan  5 19:55:28 2012] Using Nh = 1.5e+14, photon index=2.23, rate=0.00754, arf fullrun_mos2_xmm0504100901_pi300-10000_pass1_cl_src1.arf
[Thu Jan  5 19:55:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan  5 19:55:28 2012] Updating source flux to 8.1e-14