[Fri Feb 24 10:26:03 2012] Detection parameters:
  Position = (195.9, 327.8) = 12 39 12.81 9 31 31.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 34.9 +/- 8.4
  Background counts = 7.6
  Rate = 0.002 +/- 0.0006

[Fri Feb 24 10:26:05 2012] Off-axis axis estimate = 7.73'
[Fri Feb 24 14:05:26 2012] Using EEF radius (= 10.29 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 14:05:26 2012] Initial guess for spatial extent in simple fitting = 10.29"
[Fri Feb 24 14:05:26 2012] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.095
[Fri Feb 24 14:05:26 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 10.29"
[Fri Feb 24 16:21:28 2012] fullrun_mos2_xmm0504100601_pi300-10000_cl_pass0_src19.ximg exists
[Fri Feb 24 16:21:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504100601_pi300-10000_cl_pass0_src19.csv
[Fri Feb 24 16:21:28 2012] fullrun_mos2_xmm0504100601_pi300-10000_cl_pass0_src19_1.ximg exists
[Fri Feb 24 16:21:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504100601_pi300-10000_cl_pass0_src19.csv
[Fri Feb 24 16:21:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504100601_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504100601_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 16:21:29 2012] fullrun_mos2_xmm0504100601_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Fri Feb 24 16:21:29 2012] fullrun_mos2_xmm0504100601_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Fri Feb 24 16:21:29 2012] Fit fullrun_mos2_xmm0504100601_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Fri Feb 24 16:22:00 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 13.180859 pixels away
[Fri Feb 24 16:22:00 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 16:22:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 16:22:00 2012] Assessing source extent using major
[Fri Feb 24 16:22:00 2012] Source does appear to be extended
[Fri Feb 24 16:22:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 19:02:47 2012] Using EEF radius (= 10.29 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 19:02:47 2012] Initial guess for spatial extent in simple fitting = 10.29"
[Fri Feb 24 19:02:47 2012] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.095
[Fri Feb 24 19:02:47 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 10.29"
[Fri Feb 24 20:39:05 2012] fullrun_mos2_xmm0504100601_pi300-10000_cl_pass1_src17.ximg exists
[Fri Feb 24 20:39:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504100601_pi300-10000_cl_pass1_src17.csv
[Fri Feb 24 20:39:05 2012] fullrun_mos2_xmm0504100601_pi300-10000_cl_pass1_src17_1.ximg exists
[Fri Feb 24 20:39:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504100601_pi300-10000_cl_pass1_src17.csv
[Fri Feb 24 20:39:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504100601_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504100601_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 20:39:05 2012] fullrun_mos2_xmm0504100601_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Fri Feb 24 20:39:05 2012] fullrun_mos2_xmm0504100601_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Feb 24 20:39:05 2012] Fit fullrun_mos2_xmm0504100601_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Fri Feb 24 20:39:37 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 34.692753 pixels away
[Fri Feb 24 20:39:37 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 13.180859 pixels away
[Fri Feb 24 20:39:37 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 20:39:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 20:39:37 2012] Assessing source extent using major
[Fri Feb 24 20:39:37 2012] Source does appear to be extended
[Fri Feb 24 20:39:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 22:45:09 2012] XMMSAS src. selection expression = ellipse(16995.451279, 28470.101593, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Feb 24 22:45:09 2012] Writing source region out to fullrun_mos2_xmm0504100601_pi300-10000_pass1_cl_src5_src.reg
[Fri Feb 24 22:45:09 2012] Extracting stamp from image fullrun_mos2_xmm0504100601_pi300-10000_cl_sm2.00.img.gz, (158, 290) - (233, 365)
[Fri Feb 24 22:45:09 2012] XMMSAS bgd. selection expression = annulus(16995.451279, 28470.101593, 1087.500000, 2175.000000, X, Y) && !ellipse(18447.892000, 26016.630800, 531.375215, 531.375215, 0.000000, X, Y)
[Fri Feb 24 22:45:09 2012] Writing fullrun_mos2_xmm0504100601_pi300-10000_pass1_cl_src5.gif
[Fri Feb 24 22:52:15 2012] Mean detx,y = (-5593.62, -7966.86) 
[Fri Feb 24 22:52:17 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 24 22:52:46 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 24 22:52:46 2012] Setting source spectrum file to fullrun_mos2_xmm0504100601_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Feb 24 22:52:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504100601_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Feb 24 23:05:14 2012] Not generating rmf since there are only 34 counts
[Fri Feb 24 23:05:14 2012] rmf not generated due to insufficient counts
[Fri Feb 24 23:08:35 2012] Updating aperture counts using extracted products
[Fri Feb 24 23:08:35 2012] Error reading totcts from fullrun_mos2_xmm0504100601_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Feb 24 23:08:37 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 24 23:08:37 2012] Using photon index=1.80, rate=0.00242, arf fullrun_mos2_xmm0504100601_pi300-10000_pass1_cl_src5.arf
[Fri Feb 24 23:08:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 24 23:08:38 2012] Updating source flux to 3.6e-14
[Fri Feb 24 23:08:55 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting