[Fri Feb 24 10:26:05 2012] Detection parameters:
  Position = (195.6, 159.0) = 12 39 12.89 9 19 13.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.2 +/- 9.2
  Background counts = 7.4
  Rate = 0.002 +/- 0.0004

[Fri Feb 24 10:26:05 2012] Off-axis axis estimate = 12.56'
[Fri Feb 24 14:05:26 2012] Using EEF radius (= 12.71 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 14:05:26 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 24 14:05:26 2012] Initial guess for spatial extent in simple fitting = 12.71"
[Fri Feb 24 14:05:26 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.897
[Fri Feb 24 14:05:26 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 12.71"
[Fri Feb 24 16:21:28 2012] fullrun_mos2_xmm0504100601_pi300-10000_cl_pass0_src25.ximg exists
[Fri Feb 24 16:21:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504100601_pi300-10000_cl_pass0_src25.csv
[Fri Feb 24 16:21:28 2012] fullrun_mos2_xmm0504100601_pi300-10000_cl_pass0_src25_1.ximg exists
[Fri Feb 24 16:21:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504100601_pi300-10000_cl_pass0_src25.csv
[Fri Feb 24 16:21:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504100601_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504100601_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 16:21:29 2012] fullrun_mos2_xmm0504100601_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Fri Feb 24 16:21:29 2012] fullrun_mos2_xmm0504100601_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Fri Feb 24 16:21:29 2012] Fit fullrun_mos2_xmm0504100601_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Fri Feb 24 16:22:00 2012] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 35 at 17.657093 pixels away
[Fri Feb 24 16:22:00 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 16:22:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 16:22:00 2012] Assessing source extent using major
[Fri Feb 24 16:22:00 2012] Source does appear to be extended
[Fri Feb 24 16:22:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 19:02:47 2012] Using EEF radius (= 12.71 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 19:02:47 2012] Initial guess for spatial extent in simple fitting = 12.71"
[Fri Feb 24 19:02:47 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.897
[Fri Feb 24 19:02:47 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 12.71"
[Fri Feb 24 20:39:05 2012] fullrun_mos2_xmm0504100601_pi300-10000_cl_pass1_src23.ximg exists
[Fri Feb 24 20:39:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504100601_pi300-10000_cl_pass1_src23.csv
[Fri Feb 24 20:39:05 2012] fullrun_mos2_xmm0504100601_pi300-10000_cl_pass1_src23_1.ximg exists
[Fri Feb 24 20:39:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504100601_pi300-10000_cl_pass1_src23.csv
[Fri Feb 24 20:39:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504100601_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504100601_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 20:39:05 2012] fullrun_mos2_xmm0504100601_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Fri Feb 24 20:39:05 2012] fullrun_mos2_xmm0504100601_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Fri Feb 24 20:39:05 2012] Fit fullrun_mos2_xmm0504100601_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Fri Feb 24 20:39:37 2012] Spatial fit model total counts = 134.000000, observed total counts = 134.000000
[Fri Feb 24 20:39:37 2012] Offset between fit and detection position for source 35 = 0.097869 pixels
[Fri Feb 24 20:39:37 2012] 132.968200 total counts/ 102.711000 bgd. counts: snr = 2.985522
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.097869 pixels
  Position = (195.7, 159.0) = 12 39 12.87 9 19 13.3
  Extent = 5.4 (3.6-7.2)", rotation angle = 0
  Source counts = 30.3 +/- 11.5
  Background counts = 102.7
  Rate = 0.001 +/- 0.0005
[Fri Feb 24 20:39:37 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 20:39:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 20:39:37 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 20:39:37 2012] Source does appear to be extended
[Fri Feb 24 20:39:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 22:45:10 2012] XMMSAS src. selection expression = ellipse(16973.233800, 13784.131000, 323.992209, 323.992209, 0.000000, X, Y)
[Fri Feb 24 22:45:10 2012] Writing source region out to fullrun_mos2_xmm0504100601_pi300-10000_pass1_cl_src35_src.reg
[Fri Feb 24 22:45:10 2012] Extracting stamp from image fullrun_mos2_xmm0504100601_pi300-10000_cl_sm2.00.img.gz, (177, 140) - (214, 178)
[Fri Feb 24 22:45:10 2012] XMMSAS bgd. selection expression = annulus(16973.233800, 13784.131000, 539.987016, 1079.974031, X, Y) && !ellipse(18335.173752, 15206.995667, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Feb 24 22:45:10 2012] Writing fullrun_mos2_xmm0504100601_pi300-10000_pass1_cl_src35.gif
[Fri Feb 24 22:55:13 2012] Mean detx,y = (-12342.95, 5002.75) 
[Fri Feb 24 22:55:16 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 24 22:55:27 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 24 22:55:28 2012] Setting source spectrum file to fullrun_mos2_xmm0504100601_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Fri Feb 24 22:55:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504100601_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Fri Feb 24 23:06:12 2012] Not generating rmf since there are only 30 counts
[Fri Feb 24 23:06:12 2012] rmf not generated due to insufficient counts
[Fri Feb 24 23:08:36 2012] Updating aperture counts using extracted products
[Fri Feb 24 23:08:36 2012] Error reading totcts from fullrun_mos2_xmm0504100601_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Fri Feb 24 23:08:38 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 24 23:08:38 2012] Using photon index=1.80, rate=0.0014, arf fullrun_mos2_xmm0504100601_pi300-10000_pass1_cl_src35.arf
[Fri Feb 24 23:08:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 24 23:08:38 2012] Updating source flux to 4.1e-14
[Fri Feb 24 23:08:55 2012] Source 35 has fewer than 100.000000 counts, skipping spectral fitting