[Fri Feb 24 10:26:04 2012] Detection parameters:
  Position = (313.0, 285.3) = 12 38 38.38 9 28 22.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.9 +/- 10.8
  Background counts = 11.7
  Rate = 0.003 +/- 0.0005

[Fri Feb 24 10:26:05 2012] Off-axis axis estimate = 1.42'
[Fri Feb 24 14:05:26 2012] Using EEF radius (= 7.14 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 14:05:26 2012] Initial guess for spatial extent in simple fitting = 7.14"
[Fri Feb 24 14:05:26 2012] source mask rpix=1.6, npix_max = 18, mask sum = 15, frac = 0.818
[Fri Feb 24 14:05:26 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 7.14"
[Fri Feb 24 16:21:28 2012] fullrun_mos2_xmm0504100601_pi300-10000_cl_pass0_src16.ximg exists
[Fri Feb 24 16:21:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504100601_pi300-10000_cl_pass0_src16.csv
[Fri Feb 24 16:21:28 2012] fullrun_mos2_xmm0504100601_pi300-10000_cl_pass0_src16_1.ximg exists
[Fri Feb 24 16:21:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504100601_pi300-10000_cl_pass0_src16.csv
[Fri Feb 24 16:21:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504100601_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504100601_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 16:21:28 2012] fullrun_mos2_xmm0504100601_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Fri Feb 24 16:21:28 2012] fullrun_mos2_xmm0504100601_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Fri Feb 24 16:21:28 2012] Fit fullrun_mos2_xmm0504100601_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Fri Feb 24 16:22:00 2012] Spatial fit model total counts = 425.550000, observed total counts = 426.000000
[Fri Feb 24 16:22:00 2012] Offset between fit and detection position for source 17 = 3.935638 pixels
[Fri Feb 24 16:22:00 2012] 419.773100 total counts/ 367.065000 bgd. counts: snr = 2.751097
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 3.935638 pixels
  Position = (309.3, 286.7) = 12 38 39.47 9 28 28.8
  Extent = 14.3 (14.2-28.6)", rotation angle = 0
  Source counts = 52.7 +/- 20.5
  Background counts = 367.1
  Rate = 0.002 +/- 0.0009
[Fri Feb 24 16:22:00 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 16:22:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 16:22:00 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 16:22:00 2012] Source does appear to be extended
[Fri Feb 24 16:22:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 16:22:00 2012] Source is confused with source 18
[Fri Feb 24 19:02:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 24 19:02:47 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 24 19:02:47 2012] Initial guess for spatial extent in simple fitting = 14.28"
[Fri Feb 24 19:02:47 2012] source mask rpix=3.3, npix_max = 57, mask sum = 49, frac = 0.856
[Fri Feb 24 19:02:47 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 14.28"
[Fri Feb 24 20:39:05 2012] fullrun_mos2_xmm0504100601_pi300-10000_cl_pass1_src15.ximg exists
[Fri Feb 24 20:39:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504100601_pi300-10000_cl_pass1_src15.csv
[Fri Feb 24 20:39:05 2012] fullrun_mos2_xmm0504100601_pi300-10000_cl_pass1_src15_1.ximg exists
[Fri Feb 24 20:39:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504100601_pi300-10000_cl_pass1_src15.csv
[Fri Feb 24 20:39:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504100601_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504100601_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 20:39:05 2012] fullrun_mos2_xmm0504100601_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Fri Feb 24 20:39:05 2012] fullrun_mos2_xmm0504100601_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Fri Feb 24 20:39:05 2012] Fit fullrun_mos2_xmm0504100601_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Fri Feb 24 20:39:36 2012] Source 17 is offset by -0.016322 and 4.999839 pixels which is larger than
2 X fitted extent = 0.789968 x 0.789968, not incorporating fit results
[Fri Feb 24 20:39:37 2012] Warning, spatial fit 15 centroid is now closest to src. 18
[Fri Feb 24 20:39:37 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 20:39:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 20:39:37 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 20:39:37 2012] Source does appear to be extended
[Fri Feb 24 20:39:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 22:45:09 2012] XMMSAS src. selection expression = ellipse(26860.898000, 24892.668000, 856.746025, 856.746025, 0.000000, X, Y)
[Fri Feb 24 22:45:09 2012] Writing source region out to fullrun_mos2_xmm0504100601_pi300-10000_pass1_cl_src17_src.reg
[Fri Feb 24 22:45:09 2012] Extracting stamp from image fullrun_mos2_xmm0504100601_pi300-10000_cl_sm2.00.img.gz, (260, 237) - (359, 336)
[Fri Feb 24 22:45:09 2012] XMMSAS bgd. selection expression = annulus(26860.898000, 24892.668000, 1427.910041, 2855.820082, X, Y) && !ellipse(25708.919200, 23866.496600, 423.185612, 423.185612, 0.000000, X, Y) && !ellipse(26332.139252, 24934.343323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27085.487885, 25339.391937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26429.331909, 25764.764801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25810.614502, 25424.952911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27443.767600, 25130.434000, 1149.296033, 1149.296033, 0.000000, X, Y)
[Fri Feb 24 22:45:09 2012] Writing fullrun_mos2_xmm0504100601_pi300-10000_pass1_cl_src17.gif
[Fri Feb 24 22:50:51 2012] Mean detx,y = (1495.57, -348.24) 
[Fri Feb 24 22:50:53 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 24 22:51:14 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 24 22:51:14 2012] Setting source spectrum file to fullrun_mos2_xmm0504100601_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Fri Feb 24 22:51:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504100601_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Fri Feb 24 23:04:53 2012] Not generating rmf since there are only 52 counts
[Fri Feb 24 23:04:53 2012] rmf not generated due to insufficient counts
[Fri Feb 24 23:08:35 2012] Updating aperture counts using extracted products
[Fri Feb 24 23:08:35 2012] Error reading totcts from fullrun_mos2_xmm0504100601_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Fri Feb 24 23:08:37 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 24 23:08:37 2012] Using photon index=1.80, rate=0.00244, arf fullrun_mos2_xmm0504100601_pi300-10000_pass1_cl_src17.arf
[Fri Feb 24 23:08:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 24 23:08:37 2012] Updating source flux to 2.5e-14
[Fri Feb 24 23:08:55 2012] Flag b found in src. 17 procflags, skipping spectral fitting
[Fri Feb 24 23:08:55 2012] Flag c found in src. 17 procflags, skipping spectral fitting
[Fri Feb 24 23:08:55 2012] Source 17 has fewer than 100.000000 counts, skipping spectral fitting