[Fri Feb 24 10:26:04 2012] Detection parameters:
  Position = (318.5, 292.8) = 12 38 36.77 9 28 57.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 30.6 +/- 8.9
  Background counts = 11.8
  Rate = 0.002 +/- 0.0004

[Fri Feb 24 10:26:05 2012] Off-axis axis estimate = 1.51'
[Fri Feb 24 14:05:26 2012] Using EEF radius (= 7.18 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 14:05:26 2012] Initial guess for spatial extent in simple fitting = 7.18"
[Fri Feb 24 14:05:26 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.080
[Fri Feb 24 14:05:26 2012] Giving source the simple spatial ID 34 for pass 0, mean size = 7.18"
[Fri Feb 24 16:21:28 2012] fullrun_mos2_xmm0504100601_pi300-10000_cl_pass0_src34.ximg exists
[Fri Feb 24 16:21:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504100601_pi300-10000_cl_pass0_src34.csv
[Fri Feb 24 16:21:28 2012] fullrun_mos2_xmm0504100601_pi300-10000_cl_pass0_src34_1.ximg exists
[Fri Feb 24 16:21:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504100601_pi300-10000_cl_pass0_src34.csv
[Fri Feb 24 16:21:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504100601_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504100601_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 16:21:29 2012] fullrun_mos2_xmm0504100601_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Fri Feb 24 16:21:29 2012] fullrun_mos2_xmm0504100601_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Fri Feb 24 16:21:29 2012] Fit fullrun_mos2_xmm0504100601_pi300-10000_cl_pass0_tfrozen_src34 appears to have run properly
[Fri Feb 24 16:22:00 2012] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 11.896142 pixels away
[Fri Feb 24 16:22:00 2012] Source 12 is offset by -5.747247 and -5.899242 pixels which is larger than
2 X fitted extent = 1.275844 x 1.275844, not incorporating fit results
[Fri Feb 24 16:22:00 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 16:22:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 16:22:00 2012] Assessing source extent using major
[Fri Feb 24 16:22:00 2012] Source does appear to be extended
[Fri Feb 24 16:22:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 16:22:00 2012] Source is confused with source 14
[Fri Feb 24 19:02:47 2012] Using EEF radius (= 7.18 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 19:02:47 2012] Initial guess for spatial extent in simple fitting = 7.18"
[Fri Feb 24 19:02:47 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.080
[Fri Feb 24 19:02:47 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 7.18"
[Fri Feb 24 20:39:05 2012] fullrun_mos2_xmm0504100601_pi300-10000_cl_pass1_src30.ximg exists
[Fri Feb 24 20:39:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504100601_pi300-10000_cl_pass1_src30.csv
[Fri Feb 24 20:39:05 2012] fullrun_mos2_xmm0504100601_pi300-10000_cl_pass1_src30_1.ximg exists
[Fri Feb 24 20:39:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504100601_pi300-10000_cl_pass1_src30.csv
[Fri Feb 24 20:39:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504100601_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504100601_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 20:39:05 2012] fullrun_mos2_xmm0504100601_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Fri Feb 24 20:39:06 2012] fullrun_mos2_xmm0504100601_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Fri Feb 24 20:39:06 2012] Fit fullrun_mos2_xmm0504100601_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Fri Feb 24 20:39:37 2012] Spatial fit model total counts = 314.126000, observed total counts = 314.000000
[Fri Feb 24 20:39:37 2012] Offset between fit and detection position for source 12 = 4.143578 pixels
[Fri Feb 24 20:39:37 2012] 294.413400 total counts/ 247.512000 bgd. counts: snr = 2.981176
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 4.143578 pixels
  Position = (316.0, 289.4) = 12 38 37.50 9 28 40.6
  Extent = 14.4 (14.3-28.7)", rotation angle = 0
  Source counts = 46.9 +/- 17.2
  Background counts = 247.5
  Rate = 0.002 +/- 0.0008
[Fri Feb 24 20:39:37 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 20:39:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 20:39:37 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 20:39:37 2012] Source does appear to be extended
[Fri Feb 24 20:39:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 22:45:10 2012] XMMSAS src. selection expression = ellipse(27443.767600, 25130.434000, 861.972025, 861.972025, 0.000000, X, Y)
[Fri Feb 24 22:45:10 2012] Writing source region out to fullrun_mos2_xmm0504100601_pi300-10000_pass1_cl_src12_src.reg
[Fri Feb 24 22:45:10 2012] Extracting stamp from image fullrun_mos2_xmm0504100601_pi300-10000_cl_sm2.00.img.gz, (266, 240) - (366, 339)
[Fri Feb 24 22:45:10 2012] XMMSAS bgd. selection expression = annulus(27443.767600, 25130.434000, 1436.620041, 2873.240083, X, Y) && !ellipse(25708.919200, 23866.496600, 423.185612, 423.185612, 0.000000, X, Y) && !ellipse(26332.139252, 24934.343323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26860.898000, 24892.668000, 1142.328033, 1142.328033, 0.000000, X, Y) && !ellipse(27085.487885, 25339.391937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30545.216400, 26183.358000, 244.437607, 244.437607, 0.000000, X, Y) && !ellipse(26429.331909, 25764.764801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25810.614502, 25424.952911, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Feb 24 22:45:10 2012] Writing fullrun_mos2_xmm0504100601_pi300-10000_pass1_cl_src12.gif
[Fri Feb 24 22:57:22 2012] Mean detx,y = (2060.37, -264.31) 
[Fri Feb 24 22:57:24 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 24 22:57:38 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 24 22:57:38 2012] Setting source spectrum file to fullrun_mos2_xmm0504100601_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri Feb 24 22:57:38 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504100601_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Fri Feb 24 23:07:06 2012] Not generating rmf since there are only 46 counts
[Fri Feb 24 23:07:06 2012] rmf not generated due to insufficient counts
[Fri Feb 24 23:08:36 2012] Updating aperture counts using extracted products
[Fri Feb 24 23:08:36 2012] Error reading totcts from fullrun_mos2_xmm0504100601_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri Feb 24 23:08:38 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 24 23:08:38 2012] Using photon index=1.80, rate=0.00217, arf fullrun_mos2_xmm0504100601_pi300-10000_pass1_cl_src12.arf
[Fri Feb 24 23:08:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 24 23:08:38 2012] Updating source flux to 2e-14
[Fri Feb 24 23:08:55 2012] Flag b found in src. 12 procflags, skipping spectral fitting
[Fri Feb 24 23:08:55 2012] Flag c found in src. 12 procflags, skipping spectral fitting
[Fri Feb 24 23:08:55 2012] Source 12 has fewer than 100.000000 counts, skipping spectral fitting