[Fri Feb 24 10:25:12 2012] Detection parameters:
  Position = (291.0, 282.1) = 12 38 44.85 9 28 11.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.1 +/- 10.5
  Background counts = 13.6
  Rate = 0.002 +/- 0.0005

[Fri Feb 24 10:25:12 2012] Off-axis axis estimate = 1.30'
[Fri Feb 24 12:36:16 2012] Using EEF radius (= 7.08 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 12:36:16 2012] Initial guess for spatial extent in simple fitting = 7.08"
[Fri Feb 24 12:36:16 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.884
[Fri Feb 24 12:36:16 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 7.08"
[Fri Feb 24 14:05:25 2012] fullrun_mos1_xmm0504100601_pi300-10000_cl_pass0_src24.ximg exists
[Fri Feb 24 14:05:25 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0504100601_pi300-10000_cl_pass0_src24.csv
[Fri Feb 24 14:05:25 2012] fullrun_mos1_xmm0504100601_pi300-10000_cl_pass0_src24_1.ximg exists
[Fri Feb 24 14:05:25 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0504100601_pi300-10000_cl_pass0_src24.csv
[Fri Feb 24 14:05:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504100601_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504100601_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 14:05:25 2012] fullrun_mos1_xmm0504100601_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Fri Feb 24 14:05:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504100601_pi300-10000_cl_pass0_tfrozen_src24.csv
[Fri Feb 24 14:05:25 2012] fullrun_mos1_xmm0504100601_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Fri Feb 24 14:05:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504100601_pi300-10000_cl_pass0_tfrozen_src24.csv
[Fri Feb 24 14:05:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504100601_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504100601_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 16:21:49 2012] Source 14 is offset by 6.504457 and 5.628786 pixels which is larger than
2 X fitted extent = 6.132230 x 0.813641, not incorporating fit results
[Fri Feb 24 16:21:49 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 16:21:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 16:21:49 2012] Assessing source extent using major
[Fri Feb 24 16:21:49 2012] Source does appear to be extended
[Fri Feb 24 16:21:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 16:21:49 2012] Source is confused with source 13
[Fri Feb 24 17:49:35 2012] Using EEF radius (= 7.08 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 17:49:35 2012] Initial guess for spatial extent in simple fitting = 7.08"
[Fri Feb 24 17:49:35 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.884
[Fri Feb 24 17:49:35 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 7.08"
[Fri Feb 24 19:02:47 2012] fullrun_mos1_xmm0504100601_pi300-10000_cl_pass1_src22.ximg exists
[Fri Feb 24 19:02:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504100601_pi300-10000_cl_pass1_src22.csv
[Fri Feb 24 19:02:47 2012] fullrun_mos1_xmm0504100601_pi300-10000_cl_pass1_src22_1.ximg exists
[Fri Feb 24 19:02:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504100601_pi300-10000_cl_pass1_src22.csv
[Fri Feb 24 19:02:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504100601_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504100601_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 19:02:47 2012] fullrun_mos1_xmm0504100601_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Fri Feb 24 19:02:47 2012] fullrun_mos1_xmm0504100601_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Fri Feb 24 19:02:47 2012] Fit fullrun_mos1_xmm0504100601_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Fri Feb 24 20:39:26 2012] Source 14 is offset by 1.140940 and 6.265269 pixels which is larger than
2 X fitted extent = 1.580703 x 1.580703, not incorporating fit results
[Fri Feb 24 20:39:26 2012] Source 14 is offset by -4.848071 and 5.628786 pixels which is larger than
2 X fitted extent = 2.386092 x 2.386092, not incorporating fit results
[Fri Feb 24 20:39:26 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 20:39:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 20:39:26 2012] Assessing source extent using major
[Fri Feb 24 20:39:26 2012] Source does appear to be extended
[Fri Feb 24 20:39:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 22:27:46 2012] XMMSAS src. selection expression = ellipse(25268.093781, 24495.910370, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Feb 24 22:27:46 2012] Writing source region out to fullrun_mos1_xmm0504100601_pi300-10000_pass1_cl_src14_src.reg
[Fri Feb 24 22:27:46 2012] Extracting stamp from image fullrun_mos1_xmm0504100601_pi300-10000_cl_sm2.00.img.gz, (253, 245) - (328, 320)
[Fri Feb 24 22:27:46 2012] XMMSAS bgd. selection expression = annulus(25268.093781, 24495.910370, 1087.500000, 2175.000000, X, Y) && !ellipse(25712.340480, 23856.144000, 371.315211, 371.315211, 0.000000, X, Y) && !ellipse(26406.578000, 24971.976000, 1146.952033, 626.305618, 342.019000, X, Y) && !ellipse(26680.909210, 24313.220459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23251.208740, 22234.608643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26718.056000, 26039.486000, 1070.904031, 1070.904031, 0.000000, X, Y) && !ellipse(27624.835846, 25676.885986, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Feb 24 22:27:46 2012] Writing fullrun_mos1_xmm0504100601_pi300-10000_pass1_cl_src14.gif
[Fri Feb 24 22:35:51 2012] Mean detx,y = (-360.85, -213.23) 
[Fri Feb 24 22:35:53 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 24 22:36:07 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 24 22:36:07 2012] Setting source spectrum file to fullrun_mos1_xmm0504100601_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Fri Feb 24 22:36:07 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504100601_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Fri Feb 24 22:44:42 2012] Not generating rmf since there are only 39 counts
[Fri Feb 24 22:44:42 2012] rmf not generated due to insufficient counts
[Fri Feb 24 23:08:33 2012] Updating aperture counts using extracted products
[Fri Feb 24 23:08:33 2012] Error reading totcts from fullrun_mos1_xmm0504100601_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Fri Feb 24 23:08:34 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 24 23:08:34 2012] Using photon index=1.80, rate=0.00186, arf fullrun_mos1_xmm0504100601_pi300-10000_pass1_cl_src14.arf
[Fri Feb 24 23:08:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 24 23:08:34 2012] Updating source flux to 1.8e-14
[Fri Feb 24 23:08:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting