[Thu Jun 28 19:29:29 2012] Detection parameters:
  Position = (304.8, 275.0) = 14 37 22.25 36 34 2.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 155.5 +/- 21.0
  Background counts = 111.9
  Rate = 0.008 +/- 0.001

[Thu Jun 28 19:29:29 2012] Off-axis axis estimate = 1.76'
[Thu Jun 28 19:54:57 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Thu Jun 28 19:54:57 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Thu Jun 28 19:54:57 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.842
[Thu Jun 28 19:54:57 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 7.31"
[Thu Jun 28 20:03:52 2012] fullrun_mos2_xmm0504100401_pi300-10000_cl_pass0_src6.ximg exists
[Thu Jun 28 20:03:52 2012] fullrun_mos2_xmm0504100401_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu Jun 28 20:03:52 2012] Fit fullrun_mos2_xmm0504100401_pi300-10000_cl_pass0_src6 appears to have run properly
[Thu Jun 28 20:03:52 2012] fullrun_mos2_xmm0504100401_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu Jun 28 20:03:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504100401_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Jun 28 20:03:52 2012] fullrun_mos2_xmm0504100401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Jun 28 20:03:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504100401_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Jun 28 20:03:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504100401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504100401_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 20:03:57 2012] Source 5 is offset by 7.535104 and 5.734109 pixels which is larger than
2 X fitted extent = 0.840064 x 0.840064, not incorporating fit results
[Thu Jun 28 20:03:57 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 20:03:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 20:03:57 2012] Assessing source extent using major
[Thu Jun 28 20:03:57 2012] Source does appear to be extended
[Thu Jun 28 20:03:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 20:25:25 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Thu Jun 28 20:25:25 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Thu Jun 28 20:25:25 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.842
[Thu Jun 28 20:25:25 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 7.31"
[Thu Jun 28 20:33:05 2012] fullrun_mos2_xmm0504100401_pi300-10000_cl_pass1_src6.ximg exists
[Thu Jun 28 20:33:05 2012] fullrun_mos2_xmm0504100401_pi300-10000_cl_pass1_src6_1.ximg exists
[Thu Jun 28 20:33:05 2012] Fit fullrun_mos2_xmm0504100401_pi300-10000_cl_pass1_src6 appears to have run properly
[Thu Jun 28 20:33:05 2012] fullrun_mos2_xmm0504100401_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Thu Jun 28 20:33:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504100401_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu Jun 28 20:33:05 2012] fullrun_mos2_xmm0504100401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Thu Jun 28 20:33:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504100401_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu Jun 28 20:33:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504100401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504100401_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 20:33:10 2012] Source 5 is offset by -5.905954 and 5.734109 pixels which is larger than
2 X fitted extent = 0.840064 x 0.840064, not incorporating fit results
[Thu Jun 28 20:33:10 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 20:33:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 20:33:10 2012] Assessing source extent using major
[Thu Jun 28 20:33:10 2012] Source does appear to be extended
[Thu Jun 28 20:33:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 21:01:43 2012] XMMSAS src. selection expression = ellipse(26470.368042, 23877.681488, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 28 21:01:43 2012] Writing source region out to fullrun_mos2_xmm0504100401_pi300-10000_pass1_cl_src5_src.reg
[Thu Jun 28 21:01:43 2012] Extracting stamp from image fullrun_mos2_xmm0504100401_pi300-10000_cl_sm2.00.img.gz, (267, 238) - (342, 313)
[Thu Jun 28 21:01:43 2012] XMMSAS bgd. selection expression = annulus(26470.368042, 23877.681488, 1087.500000, 2175.000000, X, Y)
[Thu Jun 28 21:01:43 2012] Writing fullrun_mos2_xmm0504100401_pi300-10000_pass1_cl_src5.gif
[Thu Jun 28 21:04:26 2012] Mean detx,y = (42.80, 91.11) 
[Thu Jun 28 21:04:27 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 28 21:04:36 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 28 21:04:36 2012] Setting source spectrum file to fullrun_mos2_xmm0504100401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Jun 28 21:04:36 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504100401_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu Jun 28 21:05:03 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 28 21:05:03 2012] rmf not generated due to insufficient counts
[Thu Jun 28 21:05:48 2012] Updating aperture counts using extracted products
[Thu Jun 28 21:05:48 2012] Error reading totcts from fullrun_mos2_xmm0504100401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Jun 28 21:05:48 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 21:05:48 2012] Using photon index=1.80, rate=0.00798, arf fullrun_mos2_xmm0504100401_pi300-10000_pass1_cl_src5.arf
[Thu Jun 28 21:05:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 21:05:48 2012] Updating source flux to 8.4e-14
[Thu Jun 28 21:06:04 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 28 21:06:05 2012] xmm0504100401/analysis//spectral/fullrun_mos2_xmm0504100401_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete