[Fri Aug 17 12:46:49 2012] Detection parameters:
  Position = (154.7, 321.9) = 9 59 55.84 13 2 39.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38330.5 +/- 234.2
  Background counts = 28.6
  Rate = 2 +/- 0.01

[Fri Aug 17 12:46:52 2012] Off-axis axis estimate = 10.56'
[Fri Aug 17 12:49:22 2012] Using EEF radius (= 11.71 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 12:49:22 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 17 12:49:22 2012] Initial guess for spatial extent in simple fitting = 11.71"
[Fri Aug 17 12:49:22 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.884
[Fri Aug 17 12:49:22 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.71"
[Fri Aug 17 14:37:29 2012] fullrun_pn_xmm0504100201_pi300-10000_cl_pass0_src2.ximg exists
[Fri Aug 17 14:37:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504100201_pi300-10000_cl_pass0_src2.csv
[Fri Aug 17 14:37:29 2012] fullrun_pn_xmm0504100201_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Aug 17 14:37:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504100201_pi300-10000_cl_pass0_src2.csv
[Fri Aug 17 14:37:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504100201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504100201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 14:37:30 2012] fullrun_pn_xmm0504100201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Aug 17 14:37:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504100201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Aug 17 14:37:30 2012] fullrun_pn_xmm0504100201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Aug 17 14:37:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504100201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Aug 17 14:37:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504100201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504100201_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 16:09:19 2012] Warning, spatial fit 2 centroid is now closest to src. 31
[Fri Aug 17 16:09:19 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 16:09:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 16:09:19 2012] Assessing source extent using major
[Fri Aug 17 16:09:19 2012] Source does appear to be extended
[Fri Aug 17 16:09:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 16:09:40 2012] Using EEF radius (= 11.71 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 16:09:40 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 17 16:09:40 2012] Initial guess for spatial extent in simple fitting = 11.71"
[Fri Aug 17 16:09:40 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.884
[Fri Aug 17 16:09:40 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 11.71"
[Fri Aug 17 17:53:21 2012] fullrun_pn_xmm0504100201_pi300-10000_cl_pass1_src2.ximg exists
[Fri Aug 17 17:53:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504100201_pi300-10000_cl_pass1_src2.csv
[Fri Aug 17 17:53:21 2012] fullrun_pn_xmm0504100201_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Aug 17 17:53:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504100201_pi300-10000_cl_pass1_src2.csv
[Fri Aug 17 17:53:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504100201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504100201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 17:53:22 2012] fullrun_pn_xmm0504100201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Aug 17 17:53:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504100201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Aug 17 17:53:22 2012] fullrun_pn_xmm0504100201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Aug 17 17:53:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504100201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Aug 17 17:53:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504100201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504100201_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 18:50:27 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 14.778523 pixels away
[Fri Aug 17 18:50:27 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 18:50:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 18:50:27 2012] Assessing source extent using major
[Fri Aug 17 18:50:27 2012] Source does appear to be extended
[Fri Aug 17 18:50:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 18:50:46 2012] Counts = 38330.503906, rescaling region sizes by 3.000000
[Fri Aug 17 18:50:46 2012] XMMSAS src. selection expression = ellipse(13412.644562, 27958.559753, 1957.500000, 1957.500000, 0.000000, X, Y)
[Fri Aug 17 18:50:46 2012] Writing source region out to fullrun_pn_xmm0504100201_pi300-10000_pass1_cl_src2_src.reg
[Fri Aug 17 18:50:46 2012] Extracting stamp from image fullrun_pn_xmm0504100201_pi300-10000_cl_sm2.00.img.gz, (42, 209) - (267, 434)
[Fri Aug 17 18:50:46 2012] XMMSAS bgd. selection expression = annulus(13412.644562, 27958.559753, 9787.500000, 19575.000000, X, Y) && !ellipse(25413.914600, 23913.833200, 457.828013, 457.828013, 0.000000, X, Y) && !ellipse(27798.602400, 26674.121200, 463.958413, 463.958413, 0.000000, X, Y) && !ellipse(29426.886536, 17598.278336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18097.227371, 28483.283813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25831.788361, 39478.867279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27340.304321, 7968.642395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31960.141920, 34421.895600, 762.814422, 762.814422, 0.000000, X, Y) && !ellipse(28799.683655, 34381.978333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12023.438980, 31703.582123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28416.716000, 31274.536000, 709.563220, 709.563220, 0.000000, X, Y) && !ellipse(12166.432000, 31141.714000, 1997.752057, 1463.104042, 89.995868, X, Y) && !ellipse(20823.810600, 31018.432600, 354.318410, 354.318410, 0.000000, X, Y) && !ellipse(23480.117800, 30971.473400, 609.595218, 609.595218, 0.000000, X, Y) && !ellipse(27933.841431, 30740.929565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19888.758835, 30654.744659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12514.630020, 30488.895599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12612.934200, 30009.876000, 1972.560057, 1972.560057, 0.000000, X, Y) && !ellipse(26376.672058, 29960.462463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29108.105920, 29278.113000, 698.876020, 476.213614, 100.626788, X, Y) && !ellipse(20543.424011, 11005.129707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27262.750916, 29334.239288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23965.934680, 28190.524200, 362.351210, 362.351210, 0.000000, X, Y) && !ellipse(28794.615204, 27607.179901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25103.436829, 26685.446655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14198.489426, 25805.038940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11739.360959, 25775.270572, 557.944000, 303.840013, 112.022607, X, Y) && !ellipse(23955.407600, 25421.890800, 533.654415, 533.654415, 0.000000, X, Y) && !ellipse(23080.131020, 25347.747600, 393.426411, 393.426411, 0.000000, X, Y) && !ellipse(14347.436000, 25241.444000, 1809.736052, 1809.736052, 0.000000, X, Y) && !ellipse(32807.973419, 24406.483673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28384.466278, 15701.647537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16854.959076, 23978.766418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24869.868591, 23290.625305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15025.591400, 23563.450000, 1772.416051, 410.581612, 70.059000, X, Y) && !ellipse(14528.094000, 24662.812000, 2183.000063, 2183.000063, 0.000000, X, Y) && !ellipse(20533.042600, 22524.177800, 352.166410, 352.166410, 0.000000, X, Y) && !ellipse(21352.631805, 22106.742432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15661.913696, 21869.344315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17772.962006, 21862.980209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20326.327576, 21490.784927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19579.228882, 21166.928436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15818.316000, 21297.256000, 1679.472048, 1679.472048, 0.000000, X, Y) && !ellipse(16142.896149, 16403.399658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24122.626526, 20826.112946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12972.096878, 20317.495621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16199.076569, 20401.726425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22053.310180, 19780.502600, 393.846411, 393.846411, 0.000000, X, Y) && !ellipse(21838.061432, 19108.258545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28444.785889, 7833.028145, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 17 18:50:46 2012] Writing fullrun_pn_xmm0504100201_pi300-10000_pass1_cl_src2.gif
[Fri Aug 17 18:52:23 2012] Mean detx,y = (9953.87, 7694.18) 
[Fri Aug 17 18:52:28 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 18:57:32 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 18:57:32 2012] Setting source spectrum file to fullrun_pn_xmm0504100201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Aug 17 18:57:32 2012] Setting bgd. spectrum file to fullrun_pn_xmm0504100201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Aug 17 19:31:14 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Aug 17 19:31:14 2012] rmf not generated due to insufficient counts
[Fri Aug 17 20:53:22 2012] Updating aperture counts using extracted products
[Fri Aug 17 20:53:22 2012] Error reading totcts from fullrun_pn_xmm0504100201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Aug 17 20:53:23 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 20:53:23 2012] Using photon index=1.80, rate=1.91, arf fullrun_pn_xmm0504100201_pi300-10000_pass1_cl_src2.arf
[Fri Aug 17 20:53:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 20:53:23 2012] Updating source flux to 8.2e-12
[Fri Aug 17 20:54:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting