[Fri Aug 17 12:46:50 2012] Detection parameters:
  Position = (327.2, 360.0) = 9 59 4.49 13 5 25.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 187.6 +/- 19.0
  Background counts = 24.6
  Rate = 0.02 +/- 0.002

[Fri Aug 17 12:46:52 2012] Off-axis axis estimate = 4.93'
[Fri Aug 17 12:49:22 2012] Using EEF radius (= 8.89 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 12:49:22 2012] Initial guess for spatial extent in simple fitting = 8.89"
[Fri Aug 17 12:49:22 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.159
[Fri Aug 17 12:49:22 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 8.89"
[Fri Aug 17 14:37:29 2012] fullrun_pn_xmm0504100201_pi300-10000_cl_pass0_src13.ximg exists
[Fri Aug 17 14:37:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504100201_pi300-10000_cl_pass0_src13.csv
[Fri Aug 17 14:37:29 2012] fullrun_pn_xmm0504100201_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Aug 17 14:37:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504100201_pi300-10000_cl_pass0_src13.csv
[Fri Aug 17 14:37:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504100201_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504100201_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 14:37:30 2012] fullrun_pn_xmm0504100201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Aug 17 14:37:30 2012] fullrun_pn_xmm0504100201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Aug 17 14:37:30 2012] Fit fullrun_pn_xmm0504100201_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Aug 17 16:09:19 2012] Warning, spatial fit 13 centroid is now closest to src. 20
[Fri Aug 17 16:09:19 2012] Spatial fit model total counts = 525.675000, observed total counts = 508.000000
[Fri Aug 17 16:09:19 2012] Offset between fit and detection position for source 13 = 0.058258 pixels
[Fri Aug 17 16:09:19 2012] Warning, changing simple spatial fit ID from 13 to 18
[Fri Aug 17 16:09:19 2012] 545.937300 total counts/ 471.695000 bgd. counts: snr = 3.418383
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.058258 pixels
  Position = (327.2, 360.0) = 9 59 4.50 13 5 24.6
  Extent = 8.9 (6.2-17.2)", rotation angle = 0
  Source counts = 74.2 +/- 23.4
  Background counts = 471.7
  Rate = 0.004 +/- 0.001
[Fri Aug 17 16:09:19 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 16:09:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 16:09:19 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 16:09:19 2012] Source does appear to be extended
[Fri Aug 17 16:09:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 16:09:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 17 16:09:40 2012] Initial guess for spatial extent in simple fitting = 8.87"
[Fri Aug 17 16:09:40 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.163
[Fri Aug 17 16:09:40 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 8.87"
[Fri Aug 17 17:53:21 2012] fullrun_pn_xmm0504100201_pi300-10000_cl_pass1_src13.ximg exists
[Fri Aug 17 17:53:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504100201_pi300-10000_cl_pass1_src13.csv
[Fri Aug 17 17:53:21 2012] fullrun_pn_xmm0504100201_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri Aug 17 17:53:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504100201_pi300-10000_cl_pass1_src13.csv
[Fri Aug 17 17:53:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504100201_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504100201_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 17:53:22 2012] fullrun_pn_xmm0504100201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri Aug 17 17:53:22 2012] fullrun_pn_xmm0504100201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Aug 17 17:53:22 2012] Fit fullrun_pn_xmm0504100201_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Fri Aug 17 18:50:27 2012] Warning, spatial fit 13 centroid is now closest to src. 18
[Fri Aug 17 18:50:27 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 18:50:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 18:50:27 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 18:50:27 2012] Source does appear to be extended
[Fri Aug 17 18:50:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 18:50:46 2012] XMMSAS src. selection expression = ellipse(28416.716000, 31274.536000, 532.172415, 532.172415, 0.000000, X, Y)
[Fri Aug 17 18:50:46 2012] Writing source region out to fullrun_pn_xmm0504100201_pi300-10000_pass1_cl_src13_src.reg
[Fri Aug 17 18:50:46 2012] Extracting stamp from image fullrun_pn_xmm0504100201_pi300-10000_cl_sm2.00.img.gz, (297, 329) - (358, 391)
[Fri Aug 17 18:50:46 2012] XMMSAS bgd. selection expression = annulus(28416.716000, 31274.536000, 886.954026, 1773.908051, X, Y) && !ellipse(27933.841431, 30740.929565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26376.672058, 29960.462463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29108.105920, 29278.113000, 698.876020, 476.213614, 100.626788, X, Y) && !ellipse(27262.750916, 29334.239288, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 17 18:50:46 2012] Writing fullrun_pn_xmm0504100201_pi300-10000_pass1_cl_src13.gif
[Fri Aug 17 19:02:32 2012] Mean detx,y = (-5284.22, 5620.12) 
[Fri Aug 17 19:02:34 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 19:02:45 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 19:02:46 2012] Setting source spectrum file to fullrun_pn_xmm0504100201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri Aug 17 19:02:46 2012] Setting bgd. spectrum file to fullrun_pn_xmm0504100201_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Fri Aug 17 19:35:46 2012] Not generating rmf since there are only 74 counts
[Fri Aug 17 19:35:46 2012] rmf not generated due to insufficient counts
[Fri Aug 17 20:53:22 2012] Updating aperture counts using extracted products
[Fri Aug 17 20:53:22 2012] Error reading totcts from fullrun_pn_xmm0504100201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri Aug 17 20:53:24 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 20:53:24 2012] Using photon index=1.80, rate=0.00371, arf fullrun_pn_xmm0504100201_pi300-10000_pass1_cl_src13.arf
[Fri Aug 17 20:53:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 20:53:24 2012] Updating source flux to 1.5e-14
[Fri Aug 17 20:54:31 2012] Source 13 has fewer than 100.000000 counts, skipping spectral fitting