[Fri Aug 17 12:47:48 2012] Detection parameters:
  Position = (154.4, 322.0) = 9 59 55.94 13 2 39.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 12270.9 +/- 133.1
  Background counts = 9.4
  Rate = 1 +/- 0.01

[Fri Aug 17 12:47:49 2012] Off-axis axis estimate = 10.58'
[Fri Aug 17 15:25:46 2012] Using EEF radius (= 11.72 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 15:25:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 17 15:25:46 2012] Initial guess for spatial extent in simple fitting = 11.72"
[Fri Aug 17 15:25:46 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.029
[Fri Aug 17 15:25:46 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.72"
[Fri Aug 17 16:09:07 2012] fullrun_mos2_xmm0504100201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Aug 17 16:09:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504100201_pi300-10000_cl_pass0_src1.csv
[Fri Aug 17 16:09:07 2012] fullrun_mos2_xmm0504100201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Aug 17 16:09:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504100201_pi300-10000_cl_pass0_src1.csv
[Fri Aug 17 16:09:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504100201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504100201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 16:09:07 2012] fullrun_mos2_xmm0504100201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Aug 17 16:09:07 2012] fullrun_mos2_xmm0504100201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Aug 17 16:09:07 2012] Fit fullrun_mos2_xmm0504100201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Aug 17 16:09:28 2012] Spatial fit model total counts = 11789.700000, observed total counts = 11670.000000
[Fri Aug 17 16:09:28 2012] Offset between fit and detection position for source 4 = 0.162857 pixels
[Fri Aug 17 16:09:28 2012] 11850.560000 total counts/ 2475.060000 bgd. counts: snr = 188.452356
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.162857 pixels
  Position = (154.6, 322.0) = 9 59 55.89 13 2 38.8
  Extent = 6.9 (6.8-7.0)", rotation angle = 0
  Source counts = 9375.5 +/- 108.9
  Background counts = 2475.1
  Rate = 0.4 +/- 0.005
[Fri Aug 17 16:09:28 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 16:09:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 16:09:28 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 16:09:28 2012] Source does appear to be extended
[Fri Aug 17 16:09:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 18:23:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 17 18:23:09 2012] Initial guess for spatial extent in simple fitting = 6.87"
[Fri Aug 17 18:23:09 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.157
[Fri Aug 17 18:23:09 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.87"
[Fri Aug 17 18:50:14 2012] fullrun_mos2_xmm0504100201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Aug 17 18:50:14 2012] fullrun_mos2_xmm0504100201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Aug 17 18:50:14 2012] Fit fullrun_mos2_xmm0504100201_pi300-10000_cl_pass1_src1 appears to have run properly
[Fri Aug 17 18:50:15 2012] fullrun_mos2_xmm0504100201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Aug 17 18:50:15 2012] fullrun_mos2_xmm0504100201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Aug 17 18:50:15 2012] Fit fullrun_mos2_xmm0504100201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Aug 17 18:50:35 2012] Spatial fit model total counts = 11120.100000, observed total counts = 11123.000000
[Fri Aug 17 18:50:35 2012] Offset between fit and detection position for source 4 = 0.033707 pixels
[Fri Aug 17 18:50:35 2012] 11196.620000 total counts/ 2421.660000 bgd. counts: snr = 178.315281
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.033707 pixels
  Position = (154.5, 322.0) = 9 59 55.90 13 2 38.9
  Extent = 6.3 (6.2-6.4)", rotation angle = 0
  Source counts = 8775.0 +/- 105.8
  Background counts = 2421.7
  Rate = 0.4 +/- 0.005
[Fri Aug 17 18:50:35 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 18:50:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 18:50:35 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 18:50:35 2012] Source does appear to be extended
[Fri Aug 17 18:50:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 20:29:14 2012] Counts = 8774.960000, rescaling region sizes by 2.000000
[Fri Aug 17 20:29:14 2012] XMMSAS src. selection expression = ellipse(13394.528600, 27963.456000, 755.342422, 755.342422, 0.000000, X, Y)
[Fri Aug 17 20:29:14 2012] Writing source region out to fullrun_mos2_xmm0504100201_pi300-10000_pass1_cl_src4_src.reg
[Fri Aug 17 20:29:14 2012] Extracting stamp from image fullrun_mos2_xmm0504100201_pi300-10000_cl_sm2.00.img.gz, (111, 279) - (198, 365)
[Fri Aug 17 20:29:14 2012] XMMSAS bgd. selection expression = annulus(13394.528600, 27963.456000, 2517.808072, 5035.616145, X, Y) && !ellipse(18094.431625, 28144.921570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11761.982315, 25792.127533, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 17 20:29:14 2012] Writing fullrun_mos2_xmm0504100201_pi300-10000_pass1_cl_src4.gif
[Fri Aug 17 20:29:18 2012] Mean detx,y = (-9885.55, -7773.69) 
[Fri Aug 17 20:29:19 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 20:30:07 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 20:30:07 2012] Setting source spectrum file to fullrun_mos2_xmm0504100201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Aug 17 20:30:07 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504100201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Aug 17 20:53:25 2012] Updating aperture counts using extracted products
[Fri Aug 17 20:53:25 2012] Error reading totcts from fullrun_mos2_xmm0504100201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Aug 17 20:53:26 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 20:53:26 2012] Using photon index=1.80, rate=0.406, arf fullrun_mos2_xmm0504100201_pi300-10000_pass1_cl_src4.arf
[Fri Aug 17 20:53:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 20:53:26 2012] Updating source flux to 7.6e-12
[Fri Aug 17 20:54:31 2012] Reading fit data from xmm0504100201/analysis//spectral/fullrun_mos2_xmm0504100201_pi300-10000_pass1_cl_src4_pl.csv
[Fri Aug 17 20:54:31 2012] Spectral fit parameter nH value = 3.04711e+20
[Fri Aug 17 20:54:31 2012] Spectral fit parameter PhoIndex value = 2.25156
[Fri Aug 17 20:54:31 2012] Failed to get F(0.3-8.0) from xmm0504100201/analysis//spectral/fullrun_mos2_xmm0504100201_pi300-10000_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Fri Aug 17 20:54:31 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 20:54:31 2012] Using Nh = 3e+20, photon index=2.25, rate=0.406, arf fullrun_mos2_xmm0504100201_pi300-10000_pass1_cl_src4.arf
[Fri Aug 17 20:54:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 20:54:31 2012] Updating source flux to 6.5e-12