[Fri Aug 17 12:47:49 2012] Detection parameters:
  Position = (331.7, 246.0) = 9 59 3.16 12 57 7.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.5 +/- 9.0
  Background counts = 7.5
  Rate = 0.003 +/- 0.0005

[Fri Aug 17 12:47:49 2012] Off-axis axis estimate = 4.50'
[Fri Aug 17 15:25:46 2012] Using EEF radius (= 8.68 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 15:25:46 2012] Initial guess for spatial extent in simple fitting = 8.68"
[Fri Aug 17 15:25:46 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.004
[Fri Aug 17 15:25:46 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 8.68"
[Fri Aug 17 16:09:07 2012] fullrun_mos2_xmm0504100201_pi300-10000_cl_pass0_src24.ximg exists
[Fri Aug 17 16:09:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504100201_pi300-10000_cl_pass0_src24.csv
[Fri Aug 17 16:09:07 2012] fullrun_mos2_xmm0504100201_pi300-10000_cl_pass0_src24_1.ximg exists
[Fri Aug 17 16:09:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504100201_pi300-10000_cl_pass0_src24.csv
[Fri Aug 17 16:09:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504100201_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504100201_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 16:09:07 2012] fullrun_mos2_xmm0504100201_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Fri Aug 17 16:09:07 2012] fullrun_mos2_xmm0504100201_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Fri Aug 17 16:09:07 2012] Fit fullrun_mos2_xmm0504100201_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Fri Aug 17 16:09:28 2012] Source 26 is offset by 8.669303 and -3.194888 pixels which is larger than
2 X fitted extent = 0.997764 x 0.997764, not incorporating fit results
[Fri Aug 17 16:09:28 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 16:09:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 16:09:28 2012] Assessing source extent using major
[Fri Aug 17 16:09:28 2012] Source does appear to be extended
[Fri Aug 17 16:09:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 18:23:09 2012] Using EEF radius (= 8.68 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 18:23:09 2012] Initial guess for spatial extent in simple fitting = 8.68"
[Fri Aug 17 18:23:09 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.004
[Fri Aug 17 18:23:09 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 8.68"
[Fri Aug 17 18:50:15 2012] fullrun_mos2_xmm0504100201_pi300-10000_cl_pass1_src21.ximg exists
[Fri Aug 17 18:50:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504100201_pi300-10000_cl_pass1_src21.csv
[Fri Aug 17 18:50:15 2012] fullrun_mos2_xmm0504100201_pi300-10000_cl_pass1_src21_1.ximg exists
[Fri Aug 17 18:50:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504100201_pi300-10000_cl_pass1_src21.csv
[Fri Aug 17 18:50:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504100201_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504100201_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 18:50:15 2012] fullrun_mos2_xmm0504100201_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Fri Aug 17 18:50:15 2012] fullrun_mos2_xmm0504100201_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Fri Aug 17 18:50:15 2012] Fit fullrun_mos2_xmm0504100201_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Fri Aug 17 18:50:35 2012] Source 26 is offset by 8.673579 and -3.185736 pixels which is larger than
2 X fitted extent = 0.997674 x 0.997674, not incorporating fit results
[Fri Aug 17 18:50:35 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 18:50:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 18:50:35 2012] Assessing source extent using major
[Fri Aug 17 18:50:35 2012] Source does appear to be extended
[Fri Aug 17 18:50:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 20:29:15 2012] XMMSAS src. selection expression = ellipse(28808.721375, 21352.595963, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 17 20:29:15 2012] Writing source region out to fullrun_mos2_xmm0504100201_pi300-10000_pass1_cl_src26_src.reg
[Fri Aug 17 20:29:15 2012] Extracting stamp from image fullrun_mos2_xmm0504100201_pi300-10000_cl_sm2.00.img.gz, (294, 208) - (369, 283)
[Fri Aug 17 20:29:15 2012] XMMSAS bgd. selection expression = annulus(28808.721375, 21352.595963, 1087.500000, 2175.000000, X, Y)
[Fri Aug 17 20:29:15 2012] Writing fullrun_mos2_xmm0504100201_pi300-10000_pass1_cl_src26.gif
[Fri Aug 17 20:34:49 2012] Mean detx,y = (2392.33, 3655.93) 
[Fri Aug 17 20:34:50 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 20:34:59 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 20:34:59 2012] Setting source spectrum file to fullrun_mos2_xmm0504100201_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Fri Aug 17 20:34:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504100201_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Fri Aug 17 20:52:13 2012] Not generating rmf since there are only 46 counts
[Fri Aug 17 20:52:13 2012] rmf not generated due to insufficient counts
[Fri Aug 17 20:53:25 2012] Updating aperture counts using extracted products
[Fri Aug 17 20:53:25 2012] Error reading totcts from fullrun_mos2_xmm0504100201_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Fri Aug 17 20:53:26 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 20:53:26 2012] Using photon index=1.80, rate=0.00265, arf fullrun_mos2_xmm0504100201_pi300-10000_pass1_cl_src26.arf
[Fri Aug 17 20:53:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 20:53:26 2012] Updating source flux to 3.4e-14
[Fri Aug 17 20:54:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting