[Fri Aug 17 12:47:48 2012] Detection parameters:
  Position = (377.6, 280.1) = 9 58 49.50 12 59 36.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.4 +/- 9.1
  Background counts = 6.6
  Rate = 0.004 +/- 0.0007

[Fri Aug 17 12:47:49 2012] Off-axis axis estimate = 5.89'
[Fri Aug 17 15:25:46 2012] Using EEF radius (= 9.37 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 15:25:46 2012] Initial guess for spatial extent in simple fitting = 9.37"
[Fri Aug 17 15:25:46 2012] source mask rpix=2.2, npix_max = 28, mask sum = 29, frac = 1.028
[Fri Aug 17 15:25:46 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 9.37"
[Fri Aug 17 16:09:07 2012] fullrun_mos2_xmm0504100201_pi300-10000_cl_pass0_src11.ximg exists
[Fri Aug 17 16:09:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504100201_pi300-10000_cl_pass0_src11.csv
[Fri Aug 17 16:09:07 2012] fullrun_mos2_xmm0504100201_pi300-10000_cl_pass0_src11_1.ximg exists
[Fri Aug 17 16:09:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504100201_pi300-10000_cl_pass0_src11.csv
[Fri Aug 17 16:09:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504100201_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504100201_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 16:09:07 2012] fullrun_mos2_xmm0504100201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Fri Aug 17 16:09:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504100201_pi300-10000_cl_pass0_tfrozen_src11.csv
[Fri Aug 17 16:09:07 2012] fullrun_mos2_xmm0504100201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Aug 17 16:09:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504100201_pi300-10000_cl_pass0_tfrozen_src11.csv
[Fri Aug 17 16:09:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504100201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504100201_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 16:09:28 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 10.628368 pixels away
[Fri Aug 17 16:09:28 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 16:09:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 16:09:28 2012] Assessing source extent using major
[Fri Aug 17 16:09:28 2012] Source does appear to be extended
[Fri Aug 17 16:09:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 18:23:09 2012] Using EEF radius (= 9.37 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 18:23:09 2012] Initial guess for spatial extent in simple fitting = 9.37"
[Fri Aug 17 18:23:09 2012] source mask rpix=2.2, npix_max = 28, mask sum = 29, frac = 1.028
[Fri Aug 17 18:23:09 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 9.37"
[Fri Aug 17 18:50:15 2012] fullrun_mos2_xmm0504100201_pi300-10000_cl_pass1_src11.ximg exists
[Fri Aug 17 18:50:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504100201_pi300-10000_cl_pass1_src11.csv
[Fri Aug 17 18:50:15 2012] fullrun_mos2_xmm0504100201_pi300-10000_cl_pass1_src11_1.ximg exists
[Fri Aug 17 18:50:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504100201_pi300-10000_cl_pass1_src11.csv
[Fri Aug 17 18:50:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504100201_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504100201_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 18:50:15 2012] fullrun_mos2_xmm0504100201_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Fri Aug 17 18:50:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504100201_pi300-10000_cl_pass1_tfrozen_src11.csv
[Fri Aug 17 18:50:15 2012] fullrun_mos2_xmm0504100201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Aug 17 18:50:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504100201_pi300-10000_cl_pass1_tfrozen_src11.csv
[Fri Aug 17 18:50:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504100201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504100201_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 18:50:35 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 56.284893 pixels away
[Fri Aug 17 18:50:35 2012] Spatial fit model total counts = 112.141000, observed total counts = 96.000000
[Fri Aug 17 18:50:35 2012] Poor agreement between spatial fit and data for source 22
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Aug 17 18:50:35 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 18:50:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 18:50:35 2012] Assessing source extent using major
[Fri Aug 17 18:50:35 2012] Source does appear to be extended
[Fri Aug 17 18:50:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 20:29:15 2012] XMMSAS src. selection expression = ellipse(32803.207642, 24317.242828, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 17 20:29:15 2012] Writing source region out to fullrun_mos2_xmm0504100201_pi300-10000_pass1_cl_src22_src.reg
[Fri Aug 17 20:29:15 2012] Extracting stamp from image fullrun_mos2_xmm0504100201_pi300-10000_cl_sm2.00.img.gz, (340, 243) - (415, 318)
[Fri Aug 17 20:29:15 2012] XMMSAS bgd. selection expression = annulus(32803.207642, 24317.242828, 1087.500000, 2175.000000, X, Y)
[Fri Aug 17 20:29:15 2012] Writing fullrun_mos2_xmm0504100201_pi300-10000_pass1_cl_src22.gif
[Fri Aug 17 20:32:12 2012] Mean detx,y = (7172.48, 2174.85) 
[Fri Aug 17 20:32:13 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 20:32:33 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 20:32:33 2012] Setting source spectrum file to fullrun_mos2_xmm0504100201_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Fri Aug 17 20:32:33 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504100201_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Fri Aug 17 20:51:11 2012] Not generating rmf since there are only 51 counts
[Fri Aug 17 20:51:11 2012] rmf not generated due to insufficient counts
[Fri Aug 17 20:53:25 2012] Updating aperture counts using extracted products
[Fri Aug 17 20:53:25 2012] Error reading totcts from fullrun_mos2_xmm0504100201_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Fri Aug 17 20:53:26 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 20:53:26 2012] Using photon index=1.80, rate=0.00375, arf fullrun_mos2_xmm0504100201_pi300-10000_pass1_cl_src22.arf
[Fri Aug 17 20:53:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 20:53:26 2012] Updating source flux to 6.3e-14
[Fri Aug 17 20:54:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting