[Fri Dec 23 11:27:46 2011] Detection parameters:
  Position = (268.3, 310.2) = 19 17 1.87 5 11 10.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 146.9 +/- 21.1
  Background counts = 130.1
  Rate = 0.003 +/- 0.0005

[Fri Dec 23 11:27:47 2011] Off-axis axis estimate = 2.35'
[Fri Dec 23 12:27:05 2011] Using EEF radius (= 7.60 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 12:27:05 2011] Initial guess for spatial extent in simple fitting = 7.60"
[Fri Dec 23 12:27:05 2011] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.990
[Fri Dec 23 12:27:05 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 7.60"
[Fri Dec 23 12:48:50 2011] fullrun_mos2_xmm0504010101_pi300-10000_cl_pass0_src8.ximg exists
[Fri Dec 23 12:48:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504010101_pi300-10000_cl_pass0_src8.csv
[Fri Dec 23 12:48:50 2011] fullrun_mos2_xmm0504010101_pi300-10000_cl_pass0_src8_1.ximg exists
[Fri Dec 23 12:48:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504010101_pi300-10000_cl_pass0_src8.csv
[Fri Dec 23 12:48:50 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504010101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504010101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 12:48:51 2011] fullrun_mos2_xmm0504010101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Fri Dec 23 12:48:51 2011] fullrun_mos2_xmm0504010101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Fri Dec 23 12:48:51 2011] Fit fullrun_mos2_xmm0504010101_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Fri Dec 23 12:49:02 2011] Source 4 is offset by 7.276437 and 6.156716 pixels which is larger than
2 X fitted extent = 0.873715 x 0.873715, not incorporating fit results
[Fri Dec 23 12:49:02 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 12:49:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 12:49:02 2011] Assessing source extent using major
[Fri Dec 23 12:49:02 2011] Source does appear to be extended
[Fri Dec 23 12:49:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 13:40:43 2011] Using EEF radius (= 7.60 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 13:40:43 2011] Initial guess for spatial extent in simple fitting = 7.60"
[Fri Dec 23 13:40:43 2011] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.990
[Fri Dec 23 13:40:43 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 7.60"
[Fri Dec 23 14:03:24 2011] fullrun_mos2_xmm0504010101_pi300-10000_cl_pass1_src8.ximg exists
[Fri Dec 23 14:03:24 2011] fullrun_mos2_xmm0504010101_pi300-10000_cl_pass1_src8_1.ximg exists
[Fri Dec 23 14:03:24 2011] Fit fullrun_mos2_xmm0504010101_pi300-10000_cl_pass1_src8 appears to have run properly
[Fri Dec 23 14:03:24 2011] fullrun_mos2_xmm0504010101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Fri Dec 23 14:03:24 2011] fullrun_mos2_xmm0504010101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Fri Dec 23 14:03:24 2011] Fit fullrun_mos2_xmm0504010101_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Fri Dec 23 14:03:36 2011] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 35.611115 pixels away
[Fri Dec 23 14:03:36 2011] Source 4 is offset by 7.276437 and 6.156716 pixels which is larger than
2 X fitted extent = 0.873715 x 0.873715, not incorporating fit results
[Fri Dec 23 14:03:36 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 14:03:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 14:03:36 2011] Assessing source extent using major
[Fri Dec 23 14:03:36 2011] Source does appear to be extended
[Fri Dec 23 14:03:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 15:22:50 2011] XMMSAS src. selection expression = ellipse(23292.444000, 26936.028320, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Dec 23 15:22:50 2011] Writing source region out to fullrun_mos2_xmm0504010101_pi300-10000_pass1_cl_src4_src.reg
[Fri Dec 23 15:22:50 2011] Extracting stamp from image fullrun_mos2_xmm0504010101_pi300-10000_cl_sm2.00.img.gz, (231, 273) - (306, 348)
[Fri Dec 23 15:22:50 2011] XMMSAS bgd. selection expression = annulus(23292.444000, 26936.028320, 1087.500000, 2175.000000, X, Y) && !ellipse(25383.806600, 25483.832000, 1009.576029, 1009.576029, 0.000000, X, Y)
[Fri Dec 23 15:22:50 2011] Writing fullrun_mos2_xmm0504010101_pi300-10000_pass1_cl_src4.gif
[Fri Dec 23 15:26:09 2011] Mean detx,y = (-1514.01, -2344.95) 
[Fri Dec 23 15:26:12 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 23 15:26:29 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 23 15:26:30 2011] Setting source spectrum file to fullrun_mos2_xmm0504010101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Dec 23 15:26:30 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504010101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Dec 23 15:51:33 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Dec 23 15:51:33 2011] rmf not generated due to insufficient counts
[Fri Dec 23 15:52:53 2011] Updating aperture counts using extracted products
[Fri Dec 23 15:52:53 2011] Error reading totcts from fullrun_mos2_xmm0504010101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Dec 23 15:52:53 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 23 15:52:53 2011] Using photon index=1.80, rate=0.00347, arf fullrun_mos2_xmm0504010101_pi300-10000_pass1_cl_src4.arf
[Fri Dec 23 15:52:53 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 23 15:52:53 2011] Updating source flux to 3.2e-14
[Fri Dec 23 15:54:10 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting