[Fri Dec 23 11:27:46 2011] Detection parameters:
  Position = (352.8, 328.8) = 19 16 37.26 5 12 30.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 186.8 +/- 22.2
  Background counts = 120.2
  Rate = 0.006 +/- 0.0007

[Fri Dec 23 11:27:47 2011] Off-axis axis estimate = 4.52'
[Fri Dec 23 12:27:05 2011] Using EEF radius (= 8.69 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 12:27:05 2011] Initial guess for spatial extent in simple fitting = 8.69"
[Fri Dec 23 12:27:05 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.003
[Fri Dec 23 12:27:05 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 8.69"
[Fri Dec 23 12:48:50 2011] fullrun_mos2_xmm0504010101_pi300-10000_cl_pass0_src3.ximg exists
[Fri Dec 23 12:48:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504010101_pi300-10000_cl_pass0_src3.csv
[Fri Dec 23 12:48:50 2011] fullrun_mos2_xmm0504010101_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Dec 23 12:48:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504010101_pi300-10000_cl_pass0_src3.csv
[Fri Dec 23 12:48:50 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504010101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504010101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 12:48:50 2011] fullrun_mos2_xmm0504010101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Dec 23 12:48:51 2011] fullrun_mos2_xmm0504010101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Dec 23 12:48:51 2011] Fit fullrun_mos2_xmm0504010101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Dec 23 12:49:02 2011] Spatial fit model total counts = 299.827000, observed total counts = 300.000000
[Fri Dec 23 12:49:02 2011] Offset between fit and detection position for source 3 = 0.298074 pixels
[Fri Dec 23 12:49:02 2011] 300.702500 total counts/ 234.031000 bgd. counts: snr = 4.358164
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.298074 pixels
  Position = (352.5, 329.0) = 19 16 37.34 5 12 31.2
  Extent = 4.1 (3.4-5.1)", rotation angle = 0
  Source counts = 66.7 +/- 17.3
  Background counts = 234.0
  Rate = 0.002 +/- 0.0006
[Fri Dec 23 12:49:02 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 12:49:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 12:49:02 2011] Assessing source extent using major axis lower bound
[Fri Dec 23 12:49:02 2011] Source does appear to be extended
[Fri Dec 23 12:49:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 13:40:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 23 13:40:43 2011] Initial guess for spatial extent in simple fitting = 4.05"
[Fri Dec 23 13:40:43 2011] source mask rpix=0.9, npix_max = 8, mask sum = 6, frac = 0.732
[Fri Dec 23 13:40:43 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 4.05"
[Fri Dec 23 14:03:24 2011] fullrun_mos2_xmm0504010101_pi300-10000_cl_pass1_src3.ximg exists
[Fri Dec 23 14:03:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504010101_pi300-10000_cl_pass1_src3.csv
[Fri Dec 23 14:03:24 2011] fullrun_mos2_xmm0504010101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Dec 23 14:03:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504010101_pi300-10000_cl_pass1_src3.csv
[Fri Dec 23 14:03:24 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504010101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504010101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 14:03:24 2011] fullrun_mos2_xmm0504010101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Dec 23 14:03:24 2011] fullrun_mos2_xmm0504010101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Dec 23 14:03:24 2011] Fit fullrun_mos2_xmm0504010101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Dec 23 14:03:36 2011] Spatial fit model total counts = 305.000000, observed total counts = 305.000000
[Fri Dec 23 14:03:36 2011] Offset between fit and detection position for source 3 = 0.011678 pixels
[Fri Dec 23 14:03:36 2011] 304.067600 total counts/ 237.961000 bgd. counts: snr = 4.285406
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.011678 pixels
  Position = (352.5, 329.0) = 19 16 37.34 5 12 31.2
  Extent = 4.0 (3.4-5.0)", rotation angle = 0
  Source counts = 66.1 +/- 17.4
  Background counts = 238.0
  Rate = 0.002 +/- 0.0006
[Fri Dec 23 14:03:36 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 14:03:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 14:03:36 2011] Assessing source extent using major axis lower bound
[Fri Dec 23 14:03:36 2011] Source does appear to be extended
[Fri Dec 23 14:03:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 15:22:50 2011] XMMSAS src. selection expression = ellipse(30620.425400, 28573.938400, 241.944007, 241.944007, 0.000000, X, Y)
[Fri Dec 23 15:22:50 2011] Writing source region out to fullrun_mos2_xmm0504010101_pi300-10000_pass1_cl_src3_src.reg
[Fri Dec 23 15:22:50 2011] Extracting stamp from image fullrun_mos2_xmm0504010101_pi300-10000_cl_sm2.00.img.gz, (339, 315) - (366, 343)
[Fri Dec 23 15:22:50 2011] XMMSAS bgd. selection expression = annulus(30620.425400, 28573.938400, 403.240012, 806.480023, X, Y)
[Fri Dec 23 15:22:50 2011] Writing fullrun_mos2_xmm0504010101_pi300-10000_pass1_cl_src3.gif
[Fri Dec 23 15:23:53 2011] Mean detx,y = (5540.88, -4833.16) 
[Fri Dec 23 15:23:56 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 23 15:24:08 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 23 15:24:09 2011] Setting source spectrum file to fullrun_mos2_xmm0504010101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Dec 23 15:24:09 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504010101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Dec 23 15:38:14 2011] Not generating rmf since there are only 66 counts
[Fri Dec 23 15:38:14 2011] rmf not generated due to insufficient counts
[Fri Dec 23 15:52:52 2011] Updating aperture counts using extracted products
[Fri Dec 23 15:52:52 2011] Error reading totcts from fullrun_mos2_xmm0504010101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Dec 23 15:52:53 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 23 15:52:53 2011] Using photon index=1.80, rate=0.00244, arf fullrun_mos2_xmm0504010101_pi300-10000_pass1_cl_src3.arf
[Fri Dec 23 15:52:53 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 23 15:52:53 2011] Updating source flux to 4.8e-14
[Fri Dec 23 15:54:10 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting