[Sat Mar 24 09:07:03 2012] Detection parameters:
  Position = (407.4, 177.9) = 14 6 1.27 52 42 40.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.4 +/- 12.8
  Background counts = 28.8
  Rate = 0.003 +/- 0.0005

[Sat Mar 24 09:07:04 2012] Off-axis axis estimate = 11.78'
[Sat Mar 24 10:12:53 2012] Using EEF radius (= 12.32 ")to estimate initial spatial extent for simple fitting
[Sat Mar 24 10:12:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Mar 24 10:12:53 2012] Initial guess for spatial extent in simple fitting = 12.32"
[Sat Mar 24 10:12:53 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.946
[Sat Mar 24 10:12:53 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 12.32"
[Sat Mar 24 10:36:55 2012] fullrun_mos2_xmm0503960101_pi300-10000_cl_pass0_src9.ximg exists
[Sat Mar 24 10:36:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503960101_pi300-10000_cl_pass0_src9.csv
[Sat Mar 24 10:36:55 2012] fullrun_mos2_xmm0503960101_pi300-10000_cl_pass0_src9_1.ximg exists
[Sat Mar 24 10:36:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503960101_pi300-10000_cl_pass0_src9.csv
[Sat Mar 24 10:36:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503960101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503960101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 10:36:55 2012] fullrun_mos2_xmm0503960101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sat Mar 24 10:36:55 2012] fullrun_mos2_xmm0503960101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sat Mar 24 10:36:55 2012] Fit fullrun_mos2_xmm0503960101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sat Mar 24 10:37:09 2012] Spatial fit model total counts = 173.984000, observed total counts = 158.000000
[Sat Mar 24 10:37:09 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Mar 24 10:37:09 2012] Vigneting correction estimate = 1.000000
[Sat Mar 24 10:37:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 24 10:37:09 2012] Assessing source extent using major
[Sat Mar 24 10:37:09 2012] Source does appear to be extended
[Sat Mar 24 10:37:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 24 11:59:19 2012] Using EEF radius (= 12.32 ")to estimate initial spatial extent for simple fitting
[Sat Mar 24 11:59:19 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Mar 24 11:59:19 2012] Initial guess for spatial extent in simple fitting = 12.32"
[Sat Mar 24 11:59:19 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.946
[Sat Mar 24 11:59:19 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 12.32"
[Sat Mar 24 12:21:49 2012] fullrun_mos2_xmm0503960101_pi300-10000_cl_pass1_src9.ximg exists
[Sat Mar 24 12:21:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503960101_pi300-10000_cl_pass1_src9.csv
[Sat Mar 24 12:21:49 2012] fullrun_mos2_xmm0503960101_pi300-10000_cl_pass1_src9_1.ximg exists
[Sat Mar 24 12:21:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503960101_pi300-10000_cl_pass1_src9.csv
[Sat Mar 24 12:21:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503960101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503960101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 12:21:49 2012] fullrun_mos2_xmm0503960101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sat Mar 24 12:21:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503960101_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sat Mar 24 12:21:49 2012] fullrun_mos2_xmm0503960101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sat Mar 24 12:21:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503960101_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sat Mar 24 12:21:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503960101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503960101_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 12:22:04 2012] Spatial fit model total counts = 175.684000, observed total counts = 158.000000
[Sat Mar 24 12:22:04 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Mar 24 12:22:04 2012] Vigneting correction estimate = 1.000000
[Sat Mar 24 12:22:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 24 12:22:04 2012] Assessing source extent using major
[Sat Mar 24 12:22:04 2012] Source does appear to be extended
[Sat Mar 24 12:22:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 24 13:32:27 2012] XMMSAS src. selection expression = ellipse(35396.680084, 15428.328201, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Mar 24 13:32:27 2012] Writing source region out to fullrun_mos2_xmm0503960101_pi300-10000_pass1_cl_src1_src.reg
[Sat Mar 24 13:32:27 2012] Extracting stamp from image fullrun_mos2_xmm0503960101_pi300-10000_cl_sm2.00.img.gz, (370, 140) - (445, 215)
[Sat Mar 24 13:32:28 2012] XMMSAS bgd. selection expression = annulus(35396.680084, 15428.328201, 1087.500000, 2175.000000, X, Y)
[Sat Mar 24 13:32:28 2012] Writing fullrun_mos2_xmm0503960101_pi300-10000_pass1_cl_src1.gif
[Sat Mar 24 13:35:44 2012] Mean detx,y = (454.38, -15756.16) 
[Sat Mar 24 13:35:47 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 24 13:36:41 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 24 13:36:41 2012] Setting source spectrum file to fullrun_mos2_xmm0503960101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Mar 24 13:36:41 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503960101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Mar 24 14:02:32 2012] Not generating rmf since there are only 72 counts
[Sat Mar 24 14:02:32 2012] rmf not generated due to insufficient counts
[Sat Mar 24 14:04:15 2012] Updating aperture counts using extracted products
[Sat Mar 24 14:04:15 2012] Error reading totcts from fullrun_mos2_xmm0503960101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Mar 24 14:04:16 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 24 14:04:16 2012] Using photon index=1.80, rate=0.00272, arf fullrun_mos2_xmm0503960101_pi300-10000_pass1_cl_src1.arf
[Sat Mar 24 14:04:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 24 14:04:16 2012] Updating source flux to 7e-14
[Sat Mar 24 14:05:11 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting