[Sun Jun  9 09:40:55 2013] Detection parameters:
  Position = (341.4, 289.8) = 18 0 9.83 -24 2 52.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.9 +/- 19.8
  Background counts = 134.5
  Rate = 0.004 +/- 0.0009

[Sun Jun  9 09:41:02 2013] Off-axis axis estimate = 3.17'
[Sun Jun  9 09:42:43 2013] Using EEF radius (= 8.02 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 09:42:43 2013] Initial guess for spatial extent in simple fitting = 8.02"
[Sun Jun  9 09:42:43 2013] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.139
[Sun Jun  9 09:42:43 2013] Giving source the simple spatial ID 88 for pass 0, mean size = 8.02"
[Sun Jun  9 09:42:47 2013] fullrun_pn_xmm0503850101_pi300-10000_cl_pass0_src88.ximg exists
[Sun Jun  9 09:42:47 2013] fullrun_pn_xmm0503850101_pi300-10000_cl_pass0_src88_1.ximg exists
[Sun Jun  9 09:42:47 2013] Fit fullrun_pn_xmm0503850101_pi300-10000_cl_pass0_src88 appears to have run properly
[Sun Jun  9 09:42:49 2013] fullrun_pn_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src88.ximg exists
[Sun Jun  9 09:42:49 2013] fullrun_pn_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src88_1.ximg exists
[Sun Jun  9 09:42:49 2013] Fit fullrun_pn_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src88 appears to have run properly
[Sun Jun  9 09:43:25 2013] Spatial fit model total counts = 971.243000, observed total counts = 972.000000
[Sun Jun  9 09:43:25 2013] Offset between fit and detection position for source 90 = 2.054418 pixels
[Sun Jun  9 09:43:25 2013] 969.497000 total counts/ 795.671000 bgd. counts: snr = 6.162373
Spatial fit parameters:
  Offset between fit and detection position for source 90 = 2.054418 pixels
  Position = (339.3, 289.6) = 18 0 10.48 -24 2 51.6
  Extent = 16.0 (16.0-32.1)", rotation angle = 0
  Source counts = 173.8 +/- 31.1
  Background counts = 795.7
  Rate = 0.007 +/- 0.001
[Sun Jun  9 09:43:25 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 09:43:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 09:43:25 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 09:43:25 2013] Source does appear to be extended
[Sun Jun  9 09:43:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 09:44:57 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  9 09:44:57 2013] Initial guess for spatial extent in simple fitting = 16.03"
[Sun Jun  9 09:44:57 2013] source mask rpix=3.7, npix_max = 70, mask sum = 72, frac = 1.028
[Sun Jun  9 09:44:57 2013] Giving source the simple spatial ID 86 for pass 1, mean size = 16.03"
[Sun Jun  9 09:44:59 2013] fullrun_pn_xmm0503850101_pi300-10000_cl_pass1_src86.ximg exists
[Sun Jun  9 09:44:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503850101_pi300-10000_cl_pass1_src86.csv
[Sun Jun  9 09:44:59 2013] fullrun_pn_xmm0503850101_pi300-10000_cl_pass1_src86_1.ximg exists
[Sun Jun  9 09:44:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503850101_pi300-10000_cl_pass1_src86.csv
[Sun Jun  9 09:44:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503850101_pi300-10000_cl_pass1_src86_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503850101_pi300-10000_cl_pass1_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 09:45:02 2013] fullrun_pn_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src86.ximg exists
[Sun Jun  9 09:45:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src86.csv
[Sun Jun  9 09:45:02 2013] fullrun_pn_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src86_1.ximg exists
[Sun Jun  9 09:45:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src86.csv
[Sun Jun  9 09:45:02 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src86_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 09:45:41 2013] Warning, spatial fit 86 centroid is now closest to src. 104
[Sun Jun  9 09:45:41 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 09:45:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 09:45:41 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 09:45:41 2013] Source does appear to be extended
[Sun Jun  9 09:45:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 09:47:14 2013] XMMSAS src. selection expression = ellipse(29471.629800, 25143.293000, 961.896028, 961.896028, 0.000000, X, Y)
[Sun Jun  9 09:47:14 2013] Not overwriting source region fullrun_pn_xmm0503850101_pi300-10000_pass1_cl_src90_src.reg
[Sun Jun  9 09:47:14 2013] Extracting stamp from image fullrun_pn_xmm0503850101_pi300-10000_cl_sm2.00.img.gz, (284, 234) - (395, 345)
[Sun Jun  9 09:47:14 2013] XMMSAS bgd. selection expression = annulus(29471.629800, 25143.293000, 1603.160046, 3206.320092, X, Y) && !ellipse(25717.165436, 22938.316193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26127.858643, 22863.370026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26694.905200, 22834.246536, 764.720822, 764.720822, 0.000000, X, Y) && !ellipse(28129.535675, 22385.881592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28934.821991, 22042.753571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26591.493134, 21956.850098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25977.422028, 22128.026474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28261.413635, 21537.318298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30443.656555, 21457.602371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29086.490540, 21275.201859, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 09:47:14 2013] Writing fullrun_pn_xmm0503850101_pi300-10000_pass1_cl_src90.gif