[Sun Jun  9 09:40:53 2013] Detection parameters:
  Position = (431.5, 205.1) = 17 59 41.16 -24 8 58.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 358.4 +/- 30.0
  Background counts = 131.2
  Rate = 0.01 +/- 0.001

[Sun Jun  9 09:41:02 2013] Off-axis axis estimate = 11.78'
[Sun Jun  9 09:42:43 2013] Using EEF radius (= 12.32 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 09:42:43 2013] Initial guess for spatial extent in simple fitting = 12.32"
[Sun Jun  9 09:42:43 2013] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.946
[Sun Jun  9 09:42:43 2013] Giving source the simple spatial ID 34 for pass 0, mean size = 12.32"
[Sun Jun  9 09:42:45 2013] fullrun_pn_xmm0503850101_pi300-10000_cl_pass0_src34.ximg exists
[Sun Jun  9 09:42:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503850101_pi300-10000_cl_pass0_src34.csv
[Sun Jun  9 09:42:45 2013] fullrun_pn_xmm0503850101_pi300-10000_cl_pass0_src34_1.ximg exists
[Sun Jun  9 09:42:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503850101_pi300-10000_cl_pass0_src34.csv
[Sun Jun  9 09:42:45 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503850101_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503850101_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 09:42:48 2013] fullrun_pn_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Sun Jun  9 09:42:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src34.csv
[Sun Jun  9 09:42:48 2013] fullrun_pn_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Sun Jun  9 09:42:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src34.csv
[Sun Jun  9 09:42:48 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 09:43:25 2013] Spatial fit model total counts = 1910.710000, observed total counts = 1920.000000
[Sun Jun  9 09:43:25 2013] Offset between fit and detection position for source 35 = 0.726933 pixels
[Sun Jun  9 09:43:25 2013] Warning, changing simple spatial fit ID from 34 to 28
[Sun Jun  9 09:43:25 2013] 1902.357000 total counts/ 1105.150000 bgd. counts: snr = 23.980625
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.726933 pixels
  Position = (431.3, 205.8) = 17 59 41.22 -24 8 55.5
  Extent = 19.5 (16.4-24.0)", rotation angle = 0
  Source counts = 797.2 +/- 43.6
  Background counts = 1105.2
  Rate = 0.03 +/- 0.002
[Sun Jun  9 09:43:25 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 09:43:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 09:43:25 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 09:43:25 2013] Source does appear to be extended
[Sun Jun  9 09:43:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 09:43:25 2013] Source is confused with source 29
[Sun Jun  9 09:44:57 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  9 09:44:57 2013] Initial guess for spatial extent in simple fitting = 19.49"
[Sun Jun  9 09:44:57 2013] source mask rpix=4.5, npix_max = 99, mask sum = 90, frac = 0.907
[Sun Jun  9 09:44:57 2013] Giving source the simple spatial ID 32 for pass 1, mean size = 19.49"
[Sun Jun  9 09:44:58 2013] fullrun_pn_xmm0503850101_pi300-10000_cl_pass1_src32.ximg exists
[Sun Jun  9 09:44:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503850101_pi300-10000_cl_pass1_src32.csv
[Sun Jun  9 09:44:58 2013] fullrun_pn_xmm0503850101_pi300-10000_cl_pass1_src32_1.ximg exists
[Sun Jun  9 09:44:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503850101_pi300-10000_cl_pass1_src32.csv
[Sun Jun  9 09:44:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503850101_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503850101_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 09:45:00 2013] fullrun_pn_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Sun Jun  9 09:45:00 2013] fullrun_pn_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Sun Jun  9 09:45:00 2013] Fit fullrun_pn_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src32 appears to have run properly
[Sun Jun  9 09:45:40 2013] Warning, spatial fit 32 centroid is now closest to src. 39
[Sun Jun  9 09:45:41 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 09:45:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 09:45:41 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 09:45:41 2013] Source does appear to be extended
[Sun Jun  9 09:45:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 09:47:09 2013] XMMSAS src. selection expression = ellipse(37477.986000, 17858.790000, 1169.178034, 1169.178034, 0.000000, X, Y)
[Sun Jun  9 09:47:09 2013] Not overwriting source region fullrun_pn_xmm0503850101_pi300-10000_pass1_cl_src35_src.reg
[Sun Jun  9 09:47:09 2013] Extracting stamp from image fullrun_pn_xmm0503850101_pi300-10000_cl_sm2.00.img.gz, (364, 139) - (499, 273)
[Sun Jun  9 09:47:09 2013] XMMSAS bgd. selection expression = annulus(37477.986000, 17858.790000, 1948.630056, 3897.260112, X, Y) && !ellipse(37408.998000, 13188.034000, 1617.048047, 1617.048047, 0.000000, X, Y) && !ellipse(37095.158081, 13601.802124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36874.822846, 16704.926688, 2038.640059, 370.602147, 45.474038, X, Y) && !ellipse(38796.123800, 16397.687600, 694.050420, 694.050420, 0.000000, X, Y) && !ellipse(37494.004547, 16143.550613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38402.250244, 15114.138672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35103.344000, 15353.388000, 1938.648056, 1938.648056, 0.000000, X, Y) && !ellipse(37084.809200, 18141.758000, 1922.936055, 372.352811, 42.424900, X, Y) && !ellipse(36290.560000, 17232.250000, 1989.608057, 1989.608057, 0.000000, X, Y) && !ellipse(33221.759735, 17151.669220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38301.726000, 16942.600000, 875.416025, 875.416025, 0.000000, X, Y) && !ellipse(34065.046000, 16341.208000, 1828.304053, 1828.304053, 0.000000, X, Y) && !ellipse(42120.403717, 14658.378998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33635.896515, 21310.570831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34189.225861, 20850.324158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34990.951782, 20149.133575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35304.420471, 19786.691544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33619.079559, 19527.106674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34131.938293, 19160.520142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36248.100189, 18992.513870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34688.095245, 18728.448639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35360.199982, 18150.073074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32990.812012, 16413.375931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33612.688904, 15891.415756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34183.350281, 15357.887619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34632.963562, 15020.698898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33110.856506, 14896.163422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35378.917938, 14409.403625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34007.223602, 14197.491135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34666.955902, 13597.799667, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 09:47:09 2013] Writing fullrun_pn_xmm0503850101_pi300-10000_pass1_cl_src35.gif