[Sun Jun  9 09:40:52 2013] Detection parameters:
  Position = (425.5, 211.1) = 17 59 43.08 -24 8 32.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 344.5 +/- 31.0
  Background counts = 140.7
  Rate = 0.01 +/- 0.001

[Sun Jun  9 09:41:02 2013] Off-axis axis estimate = 11.18'
[Sun Jun  9 09:42:43 2013] Using EEF radius (= 12.02 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 09:42:43 2013] Initial guess for spatial extent in simple fitting = 12.02"
[Sun Jun  9 09:42:43 2013] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.986
[Sun Jun  9 09:42:43 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 12.02"
[Sun Jun  9 09:42:45 2013] fullrun_pn_xmm0503850101_pi300-10000_cl_pass0_src28.ximg exists
[Sun Jun  9 09:42:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503850101_pi300-10000_cl_pass0_src28.csv
[Sun Jun  9 09:42:45 2013] fullrun_pn_xmm0503850101_pi300-10000_cl_pass0_src28_1.ximg exists
[Sun Jun  9 09:42:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503850101_pi300-10000_cl_pass0_src28.csv
[Sun Jun  9 09:42:45 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503850101_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503850101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 09:42:48 2013] fullrun_pn_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Sun Jun  9 09:42:48 2013] fullrun_pn_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Sun Jun  9 09:42:48 2013] Fit fullrun_pn_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Sun Jun  9 09:43:25 2013] Warning, spatial fit 28 centroid is now closest to src. 35
[Sun Jun  9 09:43:25 2013] Spatial fit model total counts = 1794.970000, observed total counts = 1526.000000
[Sun Jun  9 09:43:25 2013] Poor agreement between spatial fit and data for source 29
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  9 09:43:25 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 09:43:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 09:43:25 2013] Assessing source extent using major
[Sun Jun  9 09:43:25 2013] Source does appear to be extended
[Sun Jun  9 09:43:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 09:43:25 2013] Source is confused with source 31
[Sun Jun  9 09:43:25 2013] Source is confused with source 35
[Sun Jun  9 09:44:57 2013] Using EEF radius (= 12.02 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 09:44:57 2013] Initial guess for spatial extent in simple fitting = 12.02"
[Sun Jun  9 09:44:57 2013] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.986
[Sun Jun  9 09:44:57 2013] Giving source the simple spatial ID 26 for pass 1, mean size = 12.02"
[Sun Jun  9 09:44:58 2013] fullrun_pn_xmm0503850101_pi300-10000_cl_pass1_src26.ximg exists
[Sun Jun  9 09:44:58 2013] fullrun_pn_xmm0503850101_pi300-10000_cl_pass1_src26_1.ximg exists
[Sun Jun  9 09:44:58 2013] Fit fullrun_pn_xmm0503850101_pi300-10000_cl_pass1_src26 appears to have run properly
[Sun Jun  9 09:45:00 2013] fullrun_pn_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Sun Jun  9 09:45:00 2013] fullrun_pn_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Sun Jun  9 09:45:00 2013] Fit fullrun_pn_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Sun Jun  9 09:45:40 2013] Spatial fit model total counts = 1922.510000, observed total counts = 1920.000000
[Sun Jun  9 09:45:40 2013] Offset between fit and detection position for source 29 = 2.391171 pixels
[Sun Jun  9 09:45:40 2013] 1535.840000 total counts/ 1017.400000 bgd. counts: snr = 16.253715
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 2.391171 pixels
  Position = (426.8, 209.1) = 17 59 42.66 -24 8 41.3
  Extent = 24.0 (23.2-48.1)" x 4.7 (4.0-5.4)", rotation angle = 42 (41-45) degrees
  Source counts = 518.4 +/- 39.2
  Background counts = 1017.4
  Rate = 0.02 +/- 0.002
[Sun Jun  9 09:45:41 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 09:45:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 09:45:41 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 09:45:41 2013] Source does appear to be extended
[Sun Jun  9 09:45:41 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 4.28
[Sun Jun  9 09:45:41 2013] Source is asymmetric
[Sun Jun  9 09:47:08 2013] XMMSAS src. selection expression = ellipse(37084.809200, 18141.758000, 1442.202041, 279.264608, 42.424900, X, Y)
[Sun Jun  9 09:47:08 2013] Not overwriting source region fullrun_pn_xmm0503850101_pi300-10000_pass1_cl_src29_src.reg
[Sun Jun  9 09:47:08 2013] Extracting stamp from image fullrun_pn_xmm0503850101_pi300-10000_cl_sm2.00.img.gz, (344, 126) - (510, 292)
[Sun Jun  9 09:47:08 2013] XMMSAS bgd. selection expression = annulus(37084.809200, 18141.758000, 2403.670069, 4807.340138, X, Y) && !ellipse(37408.998000, 13188.034000, 1617.048047, 1617.048047, 0.000000, X, Y) && !ellipse(41382.528595, 13004.415222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37095.158081, 13601.802124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36874.822846, 16704.926688, 2038.640059, 370.602147, 45.474038, X, Y) && !ellipse(38796.123800, 16397.687600, 694.050420, 694.050420, 0.000000, X, Y) && !ellipse(37494.004547, 16143.550613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38402.250244, 15114.138672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35103.344000, 15353.388000, 1938.648056, 1938.648056, 0.000000, X, Y) && !ellipse(36290.560000, 17232.250000, 1989.608057, 1989.608057, 0.000000, X, Y) && !ellipse(37477.986000, 17858.790000, 1558.904045, 1558.904045, 0.000000, X, Y) && !ellipse(33221.759735, 17151.669220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38301.726000, 16942.600000, 875.416025, 875.416025, 0.000000, X, Y) && !ellipse(34065.046000, 16341.208000, 1828.304053, 1828.304053, 0.000000, X, Y) && !ellipse(42120.403717, 14658.378998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34790.688860, 11330.177000, 2167.336062, 270.916808, 45.515000, X, Y) && !ellipse(33635.896515, 21310.570831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31451.317169, 20897.128342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34189.225861, 20850.324158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32000.212616, 20599.876572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31449.020569, 20324.834122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34990.951782, 20149.133575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31998.712524, 20036.910797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35304.420471, 19786.691544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33619.079559, 19527.106674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34131.938293, 19160.520142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36248.100189, 18992.513870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34688.095245, 18728.448639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35360.199982, 18150.073074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32071.832031, 17792.015823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31631.575073, 17459.511902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32009.730896, 17110.293243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32990.812012, 16413.375931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31654.780029, 15986.283936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33612.688904, 15891.415756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32063.420898, 15711.917191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34183.350281, 15357.887619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34632.963562, 15020.698898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33110.856506, 14896.163422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35378.917938, 14409.403625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34007.223602, 14197.491135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31872.176483, 13780.417892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34666.955902, 13597.799667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33079.885590, 12870.398636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35421.690460, 12864.139404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31505.798370, 12653.032715, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 09:47:08 2013] Writing fullrun_pn_xmm0503850101_pi300-10000_pass1_cl_src29.gif