[Sun Jun  9 09:41:12 2013] Detection parameters:
  Position = (320.4, 198.4) = 18 0 16.47 -24 9 30.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 247.5 +/- 21.0
  Background counts = 18.9
  Rate = 0.02 +/- 0.001

[Sun Jun  9 09:41:15 2013] Off-axis axis estimate = 7.43'
[Sun Jun  9 09:42:53 2013] Using EEF radius (= 10.14 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 09:42:53 2013] Initial guess for spatial extent in simple fitting = 10.14"
[Sun Jun  9 09:42:53 2013] source mask rpix=2.3, npix_max = 32, mask sum = 25, frac = 0.780
[Sun Jun  9 09:42:53 2013] Giving source the simple spatial ID 63 for pass 0, mean size = 10.14"
[Sun Jun  9 09:42:55 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src63.ximg exists
[Sun Jun  9 09:42:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src63.csv
[Sun Jun  9 09:42:55 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src63_1.ximg exists
[Sun Jun  9 09:42:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src63.csv
[Sun Jun  9 09:42:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 09:42:56 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Sun Jun  9 09:42:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src63.csv
[Sun Jun  9 09:42:56 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Sun Jun  9 09:42:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src63.csv
[Sun Jun  9 09:42:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 09:44:04 2013] Warning, spatial fit 63 centroid is now closest to src. 173
[Sun Jun  9 09:44:05 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 09:44:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 09:44:05 2013] Assessing source extent using major
[Sun Jun  9 09:44:05 2013] Source does appear to be extended
[Sun Jun  9 09:44:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 09:44:05 2013] Source is confused with source 173
[Sun Jun  9 09:45:08 2013] Using EEF radius (= 10.14 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 09:45:08 2013] Initial guess for spatial extent in simple fitting = 10.14"
[Sun Jun  9 09:45:08 2013] source mask rpix=2.3, npix_max = 32, mask sum = 25, frac = 0.780
[Sun Jun  9 09:45:08 2013] Giving source the simple spatial ID 59 for pass 1, mean size = 10.14"
[Sun Jun  9 09:45:09 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass1_src59.ximg exists
[Sun Jun  9 09:45:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503850101_pi300-10000_cl_pass1_src59.csv
[Sun Jun  9 09:45:09 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass1_src59_1.ximg exists
[Sun Jun  9 09:45:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503850101_pi300-10000_cl_pass1_src59.csv
[Sun Jun  9 09:45:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503850101_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503850101_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 09:45:11 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Sun Jun  9 09:45:11 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Sun Jun  9 09:45:11 2013] Fit fullrun_mos2_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src59 appears to have run properly
[Sun Jun  9 09:46:18 2013] Spatial fit model total counts = 585.313000, observed total counts = 539.000000
[Sun Jun  9 09:46:18 2013] Offset between fit and detection position for source 90 = 1.598215 pixels
[Sun Jun  9 09:46:18 2013] 593.482000 total counts/ 393.057000 bgd. counts: snr = 10.109371
Spatial fit parameters:
  Offset between fit and detection position for source 90 = 1.598215 pixels
  Position = (319.0, 199.1) = 18 0 16.93 -24 9 25.2
  Extent = 6.7 (6.0-7.7)", rotation angle = 0
  Source counts = 200.4 +/- 24.4
  Background counts = 393.1
  Rate = 0.006 +/- 0.0007
[Sun Jun  9 09:46:18 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 09:46:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 09:46:18 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 09:46:18 2013] Source does appear to be extended
[Sun Jun  9 09:46:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 09:48:04 2013] XMMSAS src. selection expression = ellipse(27703.024400, 17272.165480, 402.865812, 402.865812, 0.000000, X, Y)
[Sun Jun  9 09:48:04 2013] Not overwriting source region fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src90_src.reg
[Sun Jun  9 09:48:04 2013] Extracting stamp from image fullrun_mos2_xmm0503850101_pi300-10000_cl_sm2.00.img.gz, (296, 176) - (342, 222)
[Sun Jun  9 09:48:04 2013] XMMSAS bgd. selection expression = annulus(27703.024400, 17272.165480, 671.443019, 1342.886039, X, Y) && !ellipse(29442.495453, 18501.302917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26137.090200, 19652.269400, 1446.488042, 1446.488042, 0.000000, X, Y) && !ellipse(28149.201477, 18079.446640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25875.246000, 18718.637200, 1477.056043, 291.908808, 0.000000, X, Y) && !ellipse(25626.315643, 18766.300064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27373.232000, 18690.388000, 1500.400043, 1500.400043, 0.000000, X, Y) && !ellipse(28388.825836, 16926.778946, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 09:48:04 2013] Writing fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src90.gif
[Sun Jun  9 09:48:11 2013] ../../xmm0503850101/products/events/fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src90_src.evt and ../../xmm0503850101/products/events/fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src90_bgd.evt exist, delete to re-create
[Sun Jun  9 09:48:11 2013] Mean detx,y = (3023.42, 7012.99) 
[Sun Jun  9 09:48:11 2013] ../../xmm0503850101/products/images/fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src90_src.img and ../../xmm0503850101/products/images/fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src90_bgd.img exist, delete to re-create
[Sun Jun  9 09:48:11 2013] ../../xmm0503850101/products/spectra/fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src90_src_b10.pi.gz and ../../xmm0503850101/products/spectra/fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src90_bgd.pi exist, delete to re-create
[Sun Jun  9 09:48:11 2013] Setting source spectrum file to fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src90_src_b10.pi.gz
[Sun Jun  9 09:48:11 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src90_bgd.pi.gz
[Sun Jun  9 09:48:11 2013] ../../xmm0503850101/products/lightcurves/fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src90_src.lc and ../../xmm0503850101/products/lightcurves/fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src90_bgd.lc exist, delete to re-create
[Sun Jun  9 09:48:34 2013] fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src90.rmf exists, delete to re-create
[Sun Jun  9 09:48:34 2013] fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src90.arf exists, delete to re-create