[Sun Jun  9 09:41:09 2013] Detection parameters:
  Position = (183.9, 125.8) = 18 0 59.88 -24 14 44.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 643.3 +/- 32.4
  Background counts = 19.1
  Rate = 0.02 +/- 0.001

[Sun Jun  9 09:41:15 2013] Off-axis axis estimate = 15.02'
[Sun Jun  9 09:42:53 2013] Using EEF radius (= 13.94 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 09:42:53 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun  9 09:42:53 2013] Initial guess for spatial extent in simple fitting = 13.94"
[Sun Jun  9 09:42:53 2013] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.020
[Sun Jun  9 09:42:53 2013] Giving source the simple spatial ID 37 for pass 0, mean size = 13.94"
[Sun Jun  9 09:42:55 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src37.ximg exists
[Sun Jun  9 09:42:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src37.csv
[Sun Jun  9 09:42:55 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src37_1.ximg exists
[Sun Jun  9 09:42:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src37.csv
[Sun Jun  9 09:42:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 09:42:56 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Sun Jun  9 09:42:56 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Sun Jun  9 09:42:56 2013] Fit fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Sun Jun  9 09:44:04 2013] Warning, spatial fit 37 centroid is now closest to src. 3
[Sun Jun  9 09:44:04 2013] Spatial fit model total counts = 1390.610000, observed total counts = 1394.000000
[Sun Jun  9 09:44:04 2013] Offset between fit and detection position for source 9 = 1.039378 pixels
[Sun Jun  9 09:44:04 2013] Warning, changing simple spatial fit ID from 37 to 62
[Sun Jun  9 09:44:04 2013] 897.832000 total counts/ 275.786000 bgd. counts: snr = 37.457293
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 1.039378 pixels
  Position = (184.9, 126.1) = 18 0 59.57 -24 14 42.2
  Extent = 10.5 (9.5-11.3)", rotation angle = 0
  Source counts = 622.0 +/- 30.0
  Background counts = 275.8
  Rate = 0.02 +/- 0.0009
[Sun Jun  9 09:44:05 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 09:44:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 09:44:05 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 09:44:05 2013] Source does appear to be extended
[Sun Jun  9 09:44:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 09:44:05 2013] Source is confused with source 25
[Sun Jun  9 09:45:08 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  9 09:45:08 2013] Initial guess for spatial extent in simple fitting = 10.52"
[Sun Jun  9 09:45:08 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.057
[Sun Jun  9 09:45:08 2013] Giving source the simple spatial ID 34 for pass 1, mean size = 10.52"
[Sun Jun  9 09:45:09 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass1_src34.ximg exists
[Sun Jun  9 09:45:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503850101_pi300-10000_cl_pass1_src34.csv
[Sun Jun  9 09:45:09 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass1_src34_1.ximg exists
[Sun Jun  9 09:45:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503850101_pi300-10000_cl_pass1_src34.csv
[Sun Jun  9 09:45:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503850101_pi300-10000_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503850101_pi300-10000_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 09:45:10 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Sun Jun  9 09:45:10 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Sun Jun  9 09:45:10 2013] Fit fullrun_mos2_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src34 appears to have run properly
[Sun Jun  9 09:46:17 2013] Warning, spatial fit 34 centroid is now closest to src. 3
[Sun Jun  9 09:46:18 2013] Spatial fit model total counts = 1413.550000, observed total counts = 1394.000000
[Sun Jun  9 09:46:18 2013] Offset between fit and detection position for source 9 = 0.902064 pixels
[Sun Jun  9 09:46:18 2013] Warning, changing simple spatial fit ID from 34 to 58
[Sun Jun  9 09:46:18 2013] 1526.712200 total counts/ 84.792200 bgd. counts: snr = 156.589708
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.902064 pixels
  Position = (184.2, 125.5) = 18 0 59.78 -24 14 44.8
  Extent = 22.8 (22.8-22.8)", rotation angle = 0
  Source counts = 1441.9 +/- 39.1
  Background counts = 84.8
  Rate = 0.04 +/- 0.001
[Sun Jun  9 09:46:18 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 09:46:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 09:46:18 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 09:46:18 2013] Source does appear to be extended
[Sun Jun  9 09:46:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 09:48:02 2013] Counts = 1441.920000, rescaling region sizes by 2.000000
[Sun Jun  9 09:48:02 2013] XMMSAS src. selection expression = ellipse(15979.294000, 10873.290400, 2738.244079, 2738.244079, 0.000000, X, Y)
[Sun Jun  9 09:48:02 2013] Not overwriting source region fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src9_src.reg
[Sun Jun  9 09:48:02 2013] Extracting stamp from image fullrun_mos2_xmm0503850101_pi300-10000_cl_sm2.00.img.gz, (27, 0) - (342, 283)
[Sun Jun  9 09:48:02 2013] XMMSAS bgd. selection expression = annulus(15979.294000, 10873.290400, 9127.480263, 18254.960525, X, Y) && !ellipse(16645.353800, 20091.904000, 1764.024051, 518.782415, 346.050700, X, Y) && !ellipse(16028.741837, 13181.047684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25114.781200, 14986.944500, 1055.072030, 220.204806, 16.318400, X, Y) && !ellipse(22637.857147, 15514.734802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16401.228015, 13378.481867, 2034.826194, 983.129044, 346.248874, X, Y) && !ellipse(16902.243133, 22260.318413, 2053.632059, 530.993776, 354.909092, X, Y) && !ellipse(20360.153619, 20337.723855, 1443.952042, 444.069441, 359.958670, X, Y) && !ellipse(16198.099200, 18920.781600, 779.493622, 779.493622, 0.000000, X, Y) && !ellipse(29442.495453, 18501.302917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17454.327700, 22338.173133, 1624.880047, 501.010767, 353.517283, X, Y) && !ellipse(18957.321457, 13528.675980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11858.691757, 18743.039352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16654.783400, 22150.185000, 2063.904059, 2063.904059, 0.000000, X, Y) && !ellipse(16507.466000, 18969.156000, 958.312028, 958.312028, 0.000000, X, Y) && !ellipse(34316.855774, 15691.708435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22391.068830, 15544.491808, 1725.234493, 257.668807, 4.630152, X, Y) && !ellipse(16909.718560, 20144.394800, 1547.280045, 514.073615, 343.787800, X, Y) && !ellipse(11419.151670, 18547.406070, 1547.280045, 449.015049, 338.570066, X, Y) && !ellipse(23359.228000, 20136.857200, 1443.952042, 535.147215, 0.000000, X, Y) && !ellipse(20653.362137, 20331.783661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23361.296000, 20108.672000, 704.813620, 704.813620, 0.000000, X, Y) && !ellipse(29479.762800, 20756.424000, 1415.168041, 1415.168041, 0.000000, X, Y) && !ellipse(20374.959800, 22545.527800, 1459.648042, 233.952007, 357.160202, X, Y) && !ellipse(17218.322403, 19237.685913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31880.930115, 17349.723785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26137.090200, 19652.269400, 1446.488042, 1446.488042, 0.000000, X, Y) && !ellipse(31226.404327, 16559.918945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34961.253600, 17472.030600, 805.832023, 805.832023, 0.000000, X, Y) && !ellipse(16513.160400, 15426.129600, 1969.592057, 246.199207, 350.137210, X, Y) && !ellipse(29877.811401, 13006.876434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17179.043900, 15528.291382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19652.293800, 19414.399000, 401.156012, 401.156012, 0.000000, X, Y) && !ellipse(19515.252000, 13723.350000, 1255.528036, 758.460022, 288.310000, X, Y) && !ellipse(27422.421800, 14208.306620, 788.757623, 788.757623, 0.000000, X, Y) && !ellipse(16688.156860, 9690.420265, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8815.721527, 19620.012787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23398.833600, 22430.730600, 1319.160038, 1319.160038, 0.000000, X, Y) && !ellipse(19803.415335, 18929.813864, 1576.139613, 204.432006, 0.000000, X, Y) && !ellipse(26571.124000, 21811.011600, 1568.240045, 1568.240045, 0.000000, X, Y) && !ellipse(20415.188680, 19430.814280, 479.128814, 479.128814, 0.000000, X, Y) && !ellipse(31191.474762, 10115.110786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20828.270000, 13127.016000, 1917.112055, 1917.112055, 0.000000, X, Y) && !ellipse(29244.127594, 11354.372925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23948.461914, 12915.003128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32138.197144, 11533.714844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18791.062195, 11430.841751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22498.537140, 19322.393295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26561.098358, 12575.458069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11514.058334, 20913.107635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28149.201477, 18079.446640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28816.928070, 10907.876648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22927.680000, 19283.582000, 366.004811, 366.004811, 0.000000, X, Y) && !ellipse(31612.068573, 9803.999763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26311.358768, 21826.849800, 1302.680037, 1302.680037, 0.000000, X, Y) && !ellipse(15993.267000, 15331.123600, 327.855209, 327.855209, 0.000000, X, Y) && !ellipse(16742.672200, 11094.215800, 782.209623, 782.209623, 0.000000, X, Y) && !ellipse(27703.024400, 17272.165480, 537.154415, 537.154415, 0.000000, X, Y) && !ellipse(18949.528946, 10020.342834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25875.246000, 18718.637200, 1477.056043, 291.908808, 0.000000, X, Y) && !ellipse(21799.667053, 13691.654953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11408.719800, 20736.591600, 1762.608051, 1762.608051, 0.000000, X, Y) && !ellipse(30044.584412, 16022.348526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24221.032532, 13275.780457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21381.611600, 11531.542400, 1540.528044, 241.031207, 0.228607, X, Y) && !ellipse(11660.208405, 17583.084930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26870.017600, 12493.007400, 1297.088037, 241.031207, 20.354000, X, Y) && !ellipse(22469.190000, 18655.004000, 540.081616, 540.081616, 0.000000, X, Y) && !ellipse(16975.760220, 11141.472260, 391.104811, 391.104811, 0.000000, X, Y) && !ellipse(33948.361603, 14732.945496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21060.974200, 10130.427000, 821.264024, 821.264024, 0.000000, X, Y) && !ellipse(19308.998672, 11464.122543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25626.315643, 18766.300064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24042.888031, 11283.021667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33563.484000, 15007.574000, 238.845607, 238.845607, 0.000000, X, Y) && !ellipse(31815.879242, 19820.325455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20635.944000, 17443.752000, 3115.360090, 3115.360090, 0.000000, X, Y) && !ellipse(32747.927277, 19899.839600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27373.232000, 18690.388000, 1500.400043, 1500.400043, 0.000000, X, Y) && !ellipse(28434.412600, 9854.780600, 893.640026, 893.640026, 0.000000, X, Y) && !ellipse(26259.548096, 12149.446671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20145.947080, 15686.297400, 272.829608, 272.829608, 0.000000, X, Y) && !ellipse(11019.337433, 22217.404053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26336.620941, 10666.497978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31194.997986, 9263.768341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23512.968079, 11358.740448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20666.085037, 8459.629662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8205.957542, 20926.222153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11771.870972, 22471.633728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21086.489014, 11530.824844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33362.878000, 20779.160000, 1332.160038, 1332.160038, 0.000000, X, Y) && !ellipse(8905.097778, 21247.382462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30737.963898, 15611.660629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29354.125458, 21246.058929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26030.286000, 10789.117600, 841.504024, 841.504024, 0.000000, X, Y) && !ellipse(22209.734000, 18553.002000, 1557.768045, 1557.768045, 0.000000, X, Y) && !ellipse(28159.176422, 9950.210899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25145.585419, 18308.501328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24830.433441, 18226.673325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20785.509583, 23162.788300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11713.547943, 20485.058502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23097.063049, 9965.786629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16921.678635, 22902.112213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24504.472839, 15175.577377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19470.614288, 14194.424576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22496.431702, 7843.123894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27719.030975, 8646.244370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34786.357880, 12160.419907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11217.653519, 20231.517807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22853.100372, 8204.200577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32931.862396, 20750.603912, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23243.602081, 9514.638741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17840.900223, 22995.529419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27399.997345, 7909.955627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25306.212036, 8846.446854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25309.937042, 9500.523941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8752.303497, 18926.249649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23994.367371, 23790.625732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9273.553452, 19156.473877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26833.698181, 11834.408859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23620.926880, 22821.032928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30479.945496, 10221.708885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20555.661041, 26394.136841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28254.651276, 11577.415298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34413.658142, 18093.311203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11476.970230, 21426.028763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26312.547791, 22283.057617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20145.724518, 23083.612671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(7867.179787, 22181.474869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18886.199860, 19254.003723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16943.273315, 24112.325012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25833.997345, 9375.940010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8384.814255, 22410.703461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30270.030914, 22059.038193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35043.821381, 18156.240707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28760.028137, 26173.060516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8771.473473, 27155.017792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26236.712189, 20119.237946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18871.740570, 8535.212372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25893.223083, 12638.477844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24909.274536, 8988.228073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22337.395447, 8280.603027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28388.825836, 16926.778946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24470.438019, 7842.195961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20560.356461, 23930.320099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11792.617371, 16065.734360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23386.455933, 21902.907867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11692.060791, 24742.711273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23631.207153, 20964.422714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11332.997284, 24193.165344, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 09:48:02 2013] Writing fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src9.gif
[Sun Jun  9 09:48:11 2013] ../../xmm0503850101/products/events/fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src9_src.evt and ../../xmm0503850101/products/events/fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src9_bgd.evt exist, delete to re-create
[Sun Jun  9 09:48:11 2013] Mean detx,y = (-8183.03, 12508.36) 
[Sun Jun  9 09:48:11 2013] ../../xmm0503850101/products/images/fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src9_src.img and ../../xmm0503850101/products/images/fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src9_bgd.img exist, delete to re-create
[Sun Jun  9 09:48:11 2013] ../../xmm0503850101/products/spectra/fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src9_src_b10.pi.gz and ../../xmm0503850101/products/spectra/fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src9_bgd.pi exist, delete to re-create
[Sun Jun  9 09:48:11 2013] Setting source spectrum file to fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sun Jun  9 09:48:11 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sun Jun  9 09:48:11 2013] ../../xmm0503850101/products/lightcurves/fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src9_src.lc and ../../xmm0503850101/products/lightcurves/fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src9_bgd.lc exist, delete to re-create
[Sun Jun  9 09:48:34 2013] fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src9.rmf exists, delete to re-create
[Sun Jun  9 09:48:34 2013] fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src9.arf exists, delete to re-create