[Sun Jun  9 09:41:11 2013] Detection parameters:
  Position = (371.0, 228.9) = 18 0 0.40 -24 7 22.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 282.4 +/- 35.7
  Background counts = 24.7
  Rate = 0.02 +/- 0.002

[Sun Jun  9 09:41:15 2013] Off-axis axis estimate = 7.29'
[Sun Jun  9 09:42:53 2013] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 09:42:53 2013] Initial guess for spatial extent in simple fitting = 10.07"
[Sun Jun  9 09:42:53 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.946
[Sun Jun  9 09:42:53 2013] Giving source the simple spatial ID 52 for pass 0, mean size = 10.07"
[Sun Jun  9 09:42:55 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src52.ximg exists
[Sun Jun  9 09:42:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src52.csv
[Sun Jun  9 09:42:55 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src52_1.ximg exists
[Sun Jun  9 09:42:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src52.csv
[Sun Jun  9 09:42:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 09:42:56 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src52.ximg exists
[Sun Jun  9 09:42:56 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src52_1.ximg exists
[Sun Jun  9 09:42:56 2013] Fit fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src52 appears to have run properly
[Sun Jun  9 09:44:04 2013] Warning, spatial fit 52 centroid is now closest to src. 78
[Sun Jun  9 09:44:04 2013] Spatial fit model total counts = 756.276000, observed total counts = 697.000000
[Sun Jun  9 09:44:04 2013] Offset between fit and detection position for source 67 = 2.211439 pixels
[Sun Jun  9 09:44:04 2013] Warning, changing simple spatial fit ID from 52 to 84
Spatial fit parameters:
  Offset between fit and detection position for source 67 = 2.211439 pixels
  Position = (372.3, 227.1) = 17 59 59.99 -24 7 23.2
  Extent = 18.3 (16.4-19.9)", rotation angle = 0
  Source counts = 731.8 +/- 27.1
  Background counts = 0.0
  Rate = 0.02 +/- 0.0008
 Deleting source due to low signal-to-noise ratio