[Sun Jun  9 09:41:10 2013] Detection parameters:
  Position = (204.0, 257.9) = 18 0 53.47 -24 5 9.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 640.0 +/- 32.5
  Background counts = 32.9
  Rate = 0.03 +/- 0.001

[Sun Jun  9 09:41:15 2013] Off-axis axis estimate = 7.45'
[Sun Jun  9 09:42:53 2013] Using EEF radius (= 10.16 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 09:42:53 2013] Initial guess for spatial extent in simple fitting = 10.16"
[Sun Jun  9 09:42:53 2013] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.120
[Sun Jun  9 09:42:53 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 10.16"
[Sun Jun  9 09:42:54 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src11.ximg exists
[Sun Jun  9 09:42:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src11.csv
[Sun Jun  9 09:42:54 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun Jun  9 09:42:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src11.csv
[Sun Jun  9 09:42:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 09:42:55 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun Jun  9 09:42:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sun Jun  9 09:42:55 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Jun  9 09:42:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sun Jun  9 09:42:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 09:44:04 2013] Warning, spatial fit 11 centroid is now closest to src. 149
[Sun Jun  9 09:44:04 2013] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 44 at 12.807082 pixels away
[Sun Jun  9 09:44:05 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 09:44:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 09:44:05 2013] Assessing source extent using major
[Sun Jun  9 09:44:05 2013] Source does appear to be extended
[Sun Jun  9 09:44:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 09:44:05 2013] Source is confused with source 47
[Sun Jun  9 09:45:08 2013] Using EEF radius (= 10.16 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 09:45:08 2013] Initial guess for spatial extent in simple fitting = 10.16"
[Sun Jun  9 09:45:08 2013] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.120
[Sun Jun  9 09:45:08 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 10.16"
[Sun Jun  9 09:45:08 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass1_src10.ximg exists
[Sun Jun  9 09:45:08 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass1_src10_1.ximg exists
[Sun Jun  9 09:45:08 2013] Fit fullrun_mos2_xmm0503850101_pi300-10000_cl_pass1_src10 appears to have run properly
[Sun Jun  9 09:45:10 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sun Jun  9 09:45:10 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sun Jun  9 09:45:10 2013] Fit fullrun_mos2_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sun Jun  9 09:46:17 2013] Spatial fit model total counts = 1868.520000, observed total counts = 1873.000000
[Sun Jun  9 09:46:17 2013] Offset between fit and detection position for source 44 = 2.831635 pixels
[Sun Jun  9 09:46:17 2013] 1865.758000 total counts/ 897.718000 bgd. counts: snr = 32.308987
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 2.831635 pixels
  Position = (201.2, 257.3) = 18 0 54.35 -24 5 11.7
  Extent = 20.3" x 6.3", rotation angle = 354
  Source counts = 968.0 +/- 43.2
  Background counts = 897.7
  Rate = 0.03 +/- 0.001
[Sun Jun  9 09:46:18 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 09:46:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 09:46:18 2013] Assessing source extent using major
[Sun Jun  9 09:46:18 2013] Source does appear to be extended
[Sun Jun  9 09:46:18 2013] Computing asymmetry using major and minor axis, asym = 3.24
[Sun Jun  9 09:46:18 2013] Source is asymmetric
[Sun Jun  9 09:48:00 2013] XMMSAS src. selection expression = ellipse(17454.327700, 22338.173133, 1218.660035, 375.758075, 353.517283, X, Y)
[Sun Jun  9 09:48:00 2013] Not overwriting source region fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src44_src.reg
[Sun Jun  9 09:48:00 2013] Extracting stamp from image fullrun_mos2_xmm0503850101_pi300-10000_cl_sm2.00.img.gz, (131, 187) - (271, 327)
[Sun Jun  9 09:48:00 2013] XMMSAS bgd. selection expression = annulus(17454.327700, 22338.173133, 2031.100058, 4062.200117, X, Y) && !ellipse(16645.353800, 20091.904000, 1764.024051, 518.782415, 346.050700, X, Y) && !ellipse(16902.243133, 22260.318413, 2053.632059, 530.993776, 354.909092, X, Y) && !ellipse(20360.153619, 20337.723855, 1443.952042, 444.069441, 359.958670, X, Y) && !ellipse(16198.099200, 18920.781600, 779.493622, 779.493622, 0.000000, X, Y) && !ellipse(16654.783400, 22150.185000, 2063.904059, 2063.904059, 0.000000, X, Y) && !ellipse(16507.466000, 18969.156000, 958.312028, 958.312028, 0.000000, X, Y) && !ellipse(16909.718560, 20144.394800, 1547.280045, 514.073615, 343.787800, X, Y) && !ellipse(20653.362137, 20331.783661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20374.959800, 22545.527800, 1459.648042, 233.952007, 357.160202, X, Y) && !ellipse(17218.322403, 19237.685913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19652.293800, 19414.399000, 401.156012, 401.156012, 0.000000, X, Y) && !ellipse(19803.415335, 18929.813864, 1576.139613, 204.432006, 0.000000, X, Y) && !ellipse(20415.188680, 19430.814280, 479.128814, 479.128814, 0.000000, X, Y) && !ellipse(20635.944000, 17443.752000, 3115.360090, 3115.360090, 0.000000, X, Y) && !ellipse(22209.734000, 18553.002000, 1557.768045, 1557.768045, 0.000000, X, Y) && !ellipse(20785.509583, 23162.788300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16921.678635, 22902.112213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17840.900223, 22995.529419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20555.661041, 26394.136841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20145.724518, 23083.612671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18886.199860, 19254.003723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16943.273315, 24112.325012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20560.356461, 23930.320099, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 09:48:00 2013] Writing fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src44.gif
[Sun Jun  9 09:48:10 2013] ../../xmm0503850101/products/events/fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src44_src.evt and ../../xmm0503850101/products/events/fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src44_bgd.evt exist, delete to re-create
[Sun Jun  9 09:48:10 2013] Mean detx,y = (-7432.78, 1968.40) 
[Sun Jun  9 09:48:10 2013] ../../xmm0503850101/products/images/fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src44_src.img and ../../xmm0503850101/products/images/fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src44_bgd.img exist, delete to re-create
[Sun Jun  9 09:48:10 2013] ../../xmm0503850101/products/spectra/fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src44_src_b10.pi.gz and ../../xmm0503850101/products/spectra/fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src44_bgd.pi exist, delete to re-create
[Sun Jun  9 09:48:10 2013] Setting source spectrum file to fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Sun Jun  9 09:48:10 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Sun Jun  9 09:48:10 2013] ../../xmm0503850101/products/lightcurves/fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src44_src.lc and ../../xmm0503850101/products/lightcurves/fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src44_bgd.lc exist, delete to re-create
[Sun Jun  9 09:48:34 2013] fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src44.rmf exists, delete to re-create
[Sun Jun  9 09:48:34 2013] fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src44.arf exists, delete to re-create