[Sun Jun  9 09:41:09 2013] Detection parameters:
  Position = (201.9, 233.1) = 18 0 54.12 -24 6 55.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 823.5 +/- 36.0
  Background counts = 29.7
  Rate = 0.04 +/- 0.002

[Sun Jun  9 09:41:15 2013] Off-axis axis estimate = 8.45'
[Sun Jun  9 09:42:53 2013] Using EEF radius (= 10.65 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 09:42:53 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun  9 09:42:53 2013] Initial guess for spatial extent in simple fitting = 10.65"
[Sun Jun  9 09:42:53 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.035
[Sun Jun  9 09:42:53 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 10.65"
[Sun Jun  9 09:42:54 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jun  9 09:42:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src1.csv
[Sun Jun  9 09:42:54 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jun  9 09:42:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src1.csv
[Sun Jun  9 09:42:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 09:42:55 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jun  9 09:42:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jun  9 09:42:55 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jun  9 09:42:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jun  9 09:42:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 09:44:04 2013] Warning, spatial fit 1 centroid is now closest to src. 48
[Sun Jun  9 09:44:04 2013] Spatial fit model total counts = 2081.150000, observed total counts = 2085.000000
[Sun Jun  9 09:44:04 2013] Offset between fit and detection position for source 35 = 2.464273 pixels
[Sun Jun  9 09:44:04 2013] Warning, changing simple spatial fit ID from 1 to 16
[Sun Jun  9 09:44:04 2013] 1457.448300 total counts/ 1429.590000 bgd. counts: snr = 0.736799
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 2.464273 pixels
  Position = (199.8, 231.9) = 18 0 54.81 -24 7 2.0
  Extent = 9.3 (6.7-12.8)", rotation angle = 0
  Source counts = 27.9 +/- 38.2
  Background counts = 1429.6
  Rate = 0.0009 +/- 0.001
  Deleting source due to low Poisson probability