[Sun Jun  9 09:41:09 2013] Detection parameters:
  Position = (349.6, 101.9) = 18 0 7.19 -24 16 29.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 351.4 +/- 25.3
  Background counts = 20.2
  Rate = 0.01 +/- 0.0008

[Sun Jun  9 09:41:15 2013] Off-axis axis estimate = 14.73'
[Sun Jun  9 09:42:53 2013] Using EEF radius (= 13.79 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 09:42:53 2013] Initial guess for spatial extent in simple fitting = 13.79"
[Sun Jun  9 09:42:53 2013] source mask rpix=3.2, npix_max = 53, mask sum = 55, frac = 1.021
[Sun Jun  9 09:42:53 2013] Giving source the simple spatial ID 88 for pass 0, mean size = 13.79"
[Sun Jun  9 09:42:55 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src88.ximg exists
[Sun Jun  9 09:42:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src88.csv
[Sun Jun  9 09:42:55 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src88_1.ximg exists
[Sun Jun  9 09:42:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src88.csv
[Sun Jun  9 09:42:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src88_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src88.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 09:42:56 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src88.ximg exists
[Sun Jun  9 09:42:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src88.csv
[Sun Jun  9 09:42:56 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src88_1.ximg exists
[Sun Jun  9 09:42:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src88.csv
[Sun Jun  9 09:42:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src88_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src88.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 09:44:04 2013] Spatial fit model total counts = 1383.980000, observed total counts = 1348.000000
[Sun Jun  9 09:44:04 2013] Offset between fit and detection position for source 34 = 1.664680 pixels
[Sun Jun  9 09:44:04 2013] Warning, changing simple spatial fit ID from 88 to 59
[Sun Jun  9 09:44:04 2013] 617.259000 total counts/ 617.259000 bgd. counts: snr = 0.000000
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 1.664680 pixels
  Position = (351.0, 101.0) = 18 0 6.73 -24 16 31.6
  Extent = 3.4 (3.4-50.8)", rotation angle = 0
  Source counts = 0.0 +/- 24.8
  Background counts = 617.3
  Rate = 2e-17 +/- 0.0008
  Deleting source due to low Poisson probability