[Sun Jun  9 09:41:15 2013] Detection parameters:
  Position = (232.0, 180.9) = 18 0 44.56 -24 10 44.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 184.0 +/- 17.6
  Background counts = 27.2
  Rate = 0.01 +/- 0.001

[Sun Jun  9 09:41:15 2013] Off-axis axis estimate = 9.79'
[Sun Jun  9 09:42:53 2013] Using EEF radius (= 11.32 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 09:42:53 2013] Initial guess for spatial extent in simple fitting = 11.32"
[Sun Jun  9 09:42:53 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.935
[Sun Jun  9 09:42:53 2013] Giving source the simple spatial ID 91 for pass 0, mean size = 11.32"
[Sun Jun  9 09:42:55 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src91.ximg exists
[Sun Jun  9 09:42:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src91.csv
[Sun Jun  9 09:42:55 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src91_1.ximg exists
[Sun Jun  9 09:42:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src91.csv
[Sun Jun  9 09:42:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src91_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 09:42:56 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src91.ximg exists
[Sun Jun  9 09:42:56 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src91_1.ximg exists
[Sun Jun  9 09:42:56 2013] Fit fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src91 appears to have run properly
[Sun Jun  9 09:44:04 2013] Warning: source 91 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 175 at 13.904063 pixels away
[Sun Jun  9 09:44:05 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 09:44:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 09:44:05 2013] Assessing source extent using major
[Sun Jun  9 09:44:05 2013] Source does appear to be extended
[Sun Jun  9 09:44:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 09:45:08 2013] Using EEF radius (= 11.32 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 09:45:08 2013] Initial guess for spatial extent in simple fitting = 11.32"
[Sun Jun  9 09:45:08 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.935
[Sun Jun  9 09:45:08 2013] Giving source the simple spatial ID 84 for pass 1, mean size = 11.32"
[Sun Jun  9 09:45:10 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass1_src84.ximg exists
[Sun Jun  9 09:45:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503850101_pi300-10000_cl_pass1_src84.csv
[Sun Jun  9 09:45:10 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass1_src84_1.ximg exists
[Sun Jun  9 09:45:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503850101_pi300-10000_cl_pass1_src84.csv
[Sun Jun  9 09:45:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503850101_pi300-10000_cl_pass1_src84_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503850101_pi300-10000_cl_pass1_src84.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 09:45:11 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src84.ximg exists
[Sun Jun  9 09:45:11 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src84_1.ximg exists
[Sun Jun  9 09:45:11 2013] Fit fullrun_mos2_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src84 appears to have run properly
[Sun Jun  9 09:46:18 2013] Spatial fit model total counts = 381.486000, observed total counts = 379.000000
[Sun Jun  9 09:46:18 2013] Offset between fit and detection position for source 175 = 0.076798 pixels
[Sun Jun  9 09:46:18 2013] 375.742000 total counts/ 260.222000 bgd. counts: snr = 7.161190
Spatial fit parameters:
  Offset between fit and detection position for source 175 = 0.076798 pixels
  Position = (232.1, 180.9) = 18 0 44.54 -24 10 44.4
  Extent = 3.4 (2.9-4.0)", rotation angle = 0
  Source counts = 115.5 +/- 19.4
  Background counts = 260.2
  Rate = 0.004 +/- 0.0006
[Sun Jun  9 09:46:18 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 09:46:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 09:46:18 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 09:46:18 2013] Source does appear to be extended
[Sun Jun  9 09:46:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 09:46:18 2013] Source is confused with source 166
[Sun Jun  9 09:48:05 2013] XMMSAS src. selection expression = ellipse(20145.947080, 15686.297400, 204.622206, 204.622206, 0.000000, X, Y)
[Sun Jun  9 09:48:05 2013] Not overwriting source region fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src175_src.reg
[Sun Jun  9 09:48:05 2013] Extracting stamp from image fullrun_mos2_xmm0503850101_pi300-10000_cl_sm2.00.img.gz, (220, 169) - (244, 193)
[Sun Jun  9 09:48:05 2013] XMMSAS bgd. selection expression = annulus(20145.947080, 15686.297400, 341.037010, 682.074020, X, Y) && !ellipse(22391.068830, 15544.491808, 1725.234493, 257.668807, 4.630152, X, Y) && !ellipse(20828.270000, 13127.016000, 1917.112055, 1917.112055, 0.000000, X, Y) && !ellipse(20635.944000, 17443.752000, 3115.360090, 3115.360090, 0.000000, X, Y) && !ellipse(19470.614288, 14194.424576, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 09:48:05 2013] Writing fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src175.gif
[Sun Jun  9 09:48:12 2013] ../../xmm0503850101/products/events/fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src175_src.evt and ../../xmm0503850101/products/events/fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src175_bgd.evt exist, delete to re-create
[Sun Jun  9 09:48:12 2013] Mean detx,y = (-4545.62, 8615.44) 
[Sun Jun  9 09:48:12 2013] ../../xmm0503850101/products/images/fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src175_src.img and ../../xmm0503850101/products/images/fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src175_bgd.img exist, delete to re-create
[Sun Jun  9 09:48:12 2013] ../../xmm0503850101/products/spectra/fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src175_src_b10.pi.gz and ../../xmm0503850101/products/spectra/fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src175_bgd.pi exist, delete to re-create
[Sun Jun  9 09:48:12 2013] Setting source spectrum file to fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src175_src_b10.pi.gz
[Sun Jun  9 09:48:12 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src175_bgd.pi.gz
[Sun Jun  9 09:48:12 2013] ../../xmm0503850101/products/lightcurves/fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src175_src.lc and ../../xmm0503850101/products/lightcurves/fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src175_bgd.lc exist, delete to re-create
[Sun Jun  9 09:48:34 2013] fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src175.rmf exists, delete to re-create
[Sun Jun  9 09:48:34 2013] fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src175.arf exists, delete to re-create