[Sun Jun  9 09:41:12 2013] Detection parameters:
  Position = (251.1, 157.9) = 18 0 38.50 -24 12 24.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 467.4 +/- 28.6
  Background counts = 26.0
  Rate = 0.01 +/- 0.0009

[Sun Jun  9 09:41:15 2013] Off-axis axis estimate = 10.75'
[Sun Jun  9 09:42:53 2013] Using EEF radius (= 11.80 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 09:42:53 2013] Initial guess for spatial extent in simple fitting = 11.80"
[Sun Jun  9 09:42:53 2013] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.872
[Sun Jun  9 09:42:53 2013] Giving source the simple spatial ID 67 for pass 0, mean size = 11.80"
[Sun Jun  9 09:42:55 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src67.ximg exists
[Sun Jun  9 09:42:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src67.csv
[Sun Jun  9 09:42:55 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src67_1.ximg exists
[Sun Jun  9 09:42:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src67.csv
[Sun Jun  9 09:42:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 09:42:56 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Sun Jun  9 09:42:56 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Sun Jun  9 09:42:56 2013] Fit fullrun_mos2_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src67 appears to have run properly
[Sun Jun  9 09:44:04 2013] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 103 at 13.474697 pixels away
[Sun Jun  9 09:44:04 2013] Warning, spatial fit 67 centroid is now closest to src. 96
[Sun Jun  9 09:44:05 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 09:44:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 09:44:05 2013] Assessing source extent using major
[Sun Jun  9 09:44:05 2013] Source does appear to be extended
[Sun Jun  9 09:44:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 09:44:05 2013] Source is confused with source 36
[Sun Jun  9 09:45:08 2013] Using EEF radius (= 11.80 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 09:45:08 2013] Initial guess for spatial extent in simple fitting = 11.80"
[Sun Jun  9 09:45:08 2013] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.872
[Sun Jun  9 09:45:08 2013] Giving source the simple spatial ID 62 for pass 1, mean size = 11.80"
[Sun Jun  9 09:45:09 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass1_src62.ximg exists
[Sun Jun  9 09:45:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503850101_pi300-10000_cl_pass1_src62.csv
[Sun Jun  9 09:45:09 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass1_src62_1.ximg exists
[Sun Jun  9 09:45:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503850101_pi300-10000_cl_pass1_src62.csv
[Sun Jun  9 09:45:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503850101_pi300-10000_cl_pass1_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503850101_pi300-10000_cl_pass1_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 09:45:11 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src62.ximg exists
[Sun Jun  9 09:45:11 2013] fullrun_mos2_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src62_1.ximg exists
[Sun Jun  9 09:45:11 2013] Fit fullrun_mos2_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src62 appears to have run properly
[Sun Jun  9 09:46:18 2013] Warning: source 62 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 103 at 10.635907 pixels away
[Sun Jun  9 09:46:18 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 09:46:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 09:46:18 2013] Assessing source extent using major
[Sun Jun  9 09:46:18 2013] Source does appear to be extended
[Sun Jun  9 09:46:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 09:48:04 2013] XMMSAS src. selection expression = ellipse(21799.667053, 13691.654953, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun  9 09:48:04 2013] Not overwriting source region fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src103_src.reg
[Sun Jun  9 09:48:04 2013] Extracting stamp from image fullrun_mos2_xmm0503850101_pi300-10000_cl_sm2.00.img.gz, (214, 120) - (289, 195)
[Sun Jun  9 09:48:04 2013] XMMSAS bgd. selection expression = annulus(21799.667053, 13691.654953, 1087.500000, 2175.000000, X, Y) && !ellipse(22637.857147, 15514.734802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18957.321457, 13528.675980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22391.068830, 15544.491808, 1725.234493, 257.668807, 4.630152, X, Y) && !ellipse(19515.252000, 13723.350000, 1255.528036, 758.460022, 288.310000, X, Y) && !ellipse(20828.270000, 13127.016000, 1917.112055, 1917.112055, 0.000000, X, Y) && !ellipse(23948.461914, 12915.003128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18791.062195, 11430.841751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24221.032532, 13275.780457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21381.611600, 11531.542400, 1540.528044, 241.031207, 0.228607, X, Y) && !ellipse(19308.998672, 11464.122543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24042.888031, 11283.021667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20635.944000, 17443.752000, 3115.360090, 3115.360090, 0.000000, X, Y) && !ellipse(20145.947080, 15686.297400, 272.829608, 272.829608, 0.000000, X, Y) && !ellipse(23512.968079, 11358.740448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21086.489014, 11530.824844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24504.472839, 15175.577377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19470.614288, 14194.424576, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 09:48:04 2013] Writing fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src103.gif
[Sun Jun  9 09:48:12 2013] ../../xmm0503850101/products/events/fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src103_src.evt and ../../xmm0503850101/products/events/fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src103_bgd.evt exist, delete to re-create
[Sun Jun  9 09:48:12 2013] Mean detx,y = (-2932.76, 10675.16) 
[Sun Jun  9 09:48:12 2013] ../../xmm0503850101/products/images/fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src103_src.img and ../../xmm0503850101/products/images/fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src103_bgd.img exist, delete to re-create
[Sun Jun  9 09:48:12 2013] ../../xmm0503850101/products/spectra/fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src103_src_b10.pi.gz and ../../xmm0503850101/products/spectra/fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src103_bgd.pi exist, delete to re-create
[Sun Jun  9 09:48:12 2013] Setting source spectrum file to fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src103_src_b10.pi.gz
[Sun Jun  9 09:48:12 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src103_bgd.pi.gz
[Sun Jun  9 09:48:12 2013] ../../xmm0503850101/products/lightcurves/fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src103_src.lc and ../../xmm0503850101/products/lightcurves/fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src103_bgd.lc exist, delete to re-create
[Sun Jun  9 09:48:34 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun  9 09:48:34 2013] rmf not generated due to insufficient counts
[Sun Jun  9 09:48:34 2013] fullrun_mos2_xmm0503850101_pi300-10000_pass1_cl_src103.arf exists, delete to re-create