[Sun Jun  9 09:41:06 2013] Detection parameters:
  Position = (306.9, 246.3) = 18 0 20.77 -24 5 59.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 275.7 +/- 22.5
  Background counts = 34.9
  Rate = 0.01 +/- 0.0008

[Sun Jun  9 09:41:08 2013] Off-axis axis estimate = 3.83'
[Sun Jun  9 09:42:49 2013] Using EEF radius (= 8.34 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 09:42:49 2013] Initial guess for spatial extent in simple fitting = 8.34"
[Sun Jun  9 09:42:49 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.069
[Sun Jun  9 09:42:49 2013] Giving source the simple spatial ID 70 for pass 0, mean size = 8.34"
[Sun Jun  9 09:42:51 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_src70.ximg exists
[Sun Jun  9 09:42:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_src70.csv
[Sun Jun  9 09:42:51 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_src70_1.ximg exists
[Sun Jun  9 09:42:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_src70.csv
[Sun Jun  9 09:42:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 09:42:53 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src70.ximg exists
[Sun Jun  9 09:42:53 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src70_1.ximg exists
[Sun Jun  9 09:42:53 2013] Fit fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src70 appears to have run properly
[Sun Jun  9 09:43:45 2013] Warning, spatial fit 70 centroid is now closest to src. 91
[Sun Jun  9 09:43:45 2013] Spatial fit model total counts = 840.122000, observed total counts = 839.000000
[Sun Jun  9 09:43:45 2013] Offset between fit and detection position for source 99 = 4.268404 pixels
[Sun Jun  9 09:43:45 2013] Warning, changing simple spatial fit ID from 70 to 92
[Sun Jun  9 09:43:45 2013] 869.861000 total counts/ 532.913000 bgd. counts: snr = 14.596029
Spatial fit parameters:
  Offset between fit and detection position for source 99 = 4.268404 pixels
  Position = (302.8, 247.5) = 18 0 22.07 -24 5 54.5
  Extent = 16.5 (15.8-33.0)" x 3.0 (2.6-3.4)", rotation angle = 14 (12-16) degrees
  Source counts = 336.9 +/- 29.5
  Background counts = 532.9
  Rate = 0.01 +/- 0.0009
[Sun Jun  9 09:43:45 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 09:43:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 09:43:45 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 09:43:45 2013] Source does appear to be extended
[Sun Jun  9 09:43:45 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 4.61
[Sun Jun  9 09:43:45 2013] Source is asymmetric
[Sun Jun  9 09:43:45 2013] Source is confused with source 87
[Sun Jun  9 09:43:45 2013] Source is confused with source 91
[Sun Jun  9 09:43:45 2013] Source is confused with source 96
[Sun Jun  9 09:45:02 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  9 09:45:02 2013] Initial guess for spatial extent in simple fitting = 9.77"
[Sun Jun  9 09:45:02 2013] source mask rpix=2.2, npix_max = 30, mask sum = 30, frac = 0.995
[Sun Jun  9 09:45:02 2013] Giving source the simple spatial ID 68 for pass 1, mean size = 9.77"
[Sun Jun  9 09:45:05 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_src68.ximg exists
[Sun Jun  9 09:45:05 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_src68_1.ximg exists
[Sun Jun  9 09:45:05 2013] Fit fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_src68 appears to have run properly
[Sun Jun  9 09:45:07 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src68.ximg exists
[Sun Jun  9 09:45:07 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src68_1.ximg exists
[Sun Jun  9 09:45:07 2013] Fit fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src68 appears to have run properly
[Sun Jun  9 09:46:00 2013] Spatial fit model total counts = 896.093000, observed total counts = 894.000000
[Sun Jun  9 09:46:00 2013] Offset between fit and detection position for source 99 = 0.110103 pixels
[Sun Jun  9 09:46:00 2013] 928.205000 total counts/ 562.422000 bgd. counts: snr = 15.423835
Spatial fit parameters:
  Offset between fit and detection position for source 99 = 0.110103 pixels
  Position = (302.9, 247.5) = 18 0 22.05 -24 5 54.8
  Extent = 19.5 (19.4-39.1)" x 4.8 (4.3-5.4)", rotation angle = 0 (360-0) degrees
  Source counts = 365.8 +/- 30.5
  Background counts = 562.4
  Rate = 0.01 +/- 0.0009
[Sun Jun  9 09:46:00 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 09:46:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 09:46:00 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 09:46:00 2013] Source does appear to be extended
[Sun Jun  9 09:46:00 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.59
[Sun Jun  9 09:46:00 2013] Source is asymmetric
[Sun Jun  9 09:47:35 2013] XMMSAS src. selection expression = ellipse(26302.389080, 21479.846600, 1171.872034, 287.044808, 0.000000, X, Y)
[Sun Jun  9 09:47:35 2013] Not overwriting source region fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src99_src.reg
[Sun Jun  9 09:47:35 2013] Extracting stamp from image fullrun_mos1_xmm0503850101_pi300-10000_cl_sm2.00.img.gz, (236, 180) - (370, 315)
[Sun Jun  9 09:47:35 2013] XMMSAS bgd. selection expression = annulus(26302.389080, 21479.846600, 1953.120056, 3906.240112, X, Y) && !ellipse(30112.261000, 22245.135600, 762.146422, 762.146422, 0.000000, X, Y) && !ellipse(24179.470703, 22441.504456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29370.910553, 22862.860260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23685.393400, 24355.084800, 1491.656043, 451.132813, 10.042600, X, Y) && !ellipse(26680.501000, 23664.357000, 904.608026, 904.608026, 0.000000, X, Y) && !ellipse(30058.230000, 21216.934000, 516.359215, 516.359215, 0.000000, X, Y) && !ellipse(29616.815836, 20437.419800, 539.095216, 539.095216, 0.000000, X, Y) && !ellipse(29432.961243, 21349.253281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24134.600400, 24252.271400, 741.961621, 741.961621, 0.000000, X, Y) && !ellipse(23057.367800, 22001.106000, 593.366417, 593.366417, 0.000000, X, Y) && !ellipse(27121.551147, 18991.607178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28844.208496, 20831.501328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26814.067800, 23618.106660, 1204.120035, 456.400813, 19.910000, X, Y) && !ellipse(22823.855225, 20831.498672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23881.958000, 21914.762000, 361.783210, 361.783210, 0.000000, X, Y) && !ellipse(26750.226715, 22139.586472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20877.819800, 23135.074200, 1799.696052, 1799.696052, 0.000000, X, Y) && !ellipse(23587.781494, 22484.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26242.597213, 20201.996336, 1414.040041, 176.755205, 13.153458, X, Y) && !ellipse(27103.019111, 22027.981165, 1083.305497, 269.346419, 183.637240, X, Y) && !ellipse(26184.498000, 21580.312000, 379.682411, 379.682411, 0.000000, X, Y) && !ellipse(25610.625000, 20346.476200, 448.032013, 448.032013, 0.000000, X, Y) && !ellipse(22282.014191, 18251.484573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27539.882874, 16734.545532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25393.554535, 17539.072510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23966.287781, 23614.411438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24891.241577, 17582.020264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23785.645600, 23223.988000, 1304.976038, 1304.976038, 0.000000, X, Y) && !ellipse(27409.874000, 22282.594000, 1352.648039, 1352.648039, 0.000000, X, Y) && !ellipse(24176.369629, 23112.151581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26860.402466, 22911.500397, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 09:47:35 2013] Writing fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src99.gif
[Sun Jun  9 09:47:42 2013] ../../xmm0503850101/products/events/fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src99_src.evt and ../../xmm0503850101/products/events/fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src99_bgd.evt exist, delete to re-create
[Sun Jun  9 09:47:42 2013] Mean detx,y = (3041.98, -1790.40) 
[Sun Jun  9 09:47:42 2013] ../../xmm0503850101/products/images/fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src99_src.img and ../../xmm0503850101/products/images/fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src99_bgd.img exist, delete to re-create
[Sun Jun  9 09:47:42 2013] ../../xmm0503850101/products/spectra/fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src99_src_b10.pi.gz and ../../xmm0503850101/products/spectra/fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src99_bgd.pi exist, delete to re-create
[Sun Jun  9 09:47:42 2013] Setting source spectrum file to fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src99_src_b10.pi.gz
[Sun Jun  9 09:47:42 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src99_bgd.pi.gz
[Sun Jun  9 09:47:42 2013] ../../xmm0503850101/products/lightcurves/fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src99_src.lc and ../../xmm0503850101/products/lightcurves/fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src99_bgd.lc exist, delete to re-create
[Sun Jun  9 09:47:58 2013] fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src99.rmf exists, delete to re-create
[Sun Jun  9 09:47:58 2013] fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src99.arf exists, delete to re-create