[Sun Jun  9 09:41:06 2013] Detection parameters:
  Position = (198.7, 250.0) = 18 0 55.14 -24 5 43.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 354.6 +/- 24.4
  Background counts = 33.5
  Rate = 0.01 +/- 0.001

[Sun Jun  9 09:41:08 2013] Off-axis axis estimate = 8.04'
[Sun Jun  9 09:42:49 2013] Using EEF radius (= 10.45 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 09:42:49 2013] Initial guess for spatial extent in simple fitting = 10.45"
[Sun Jun  9 09:42:49 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.069
[Sun Jun  9 09:42:49 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 10.45"
[Sun Jun  9 09:42:50 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_src25.ximg exists
[Sun Jun  9 09:42:50 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_src25_1.ximg exists
[Sun Jun  9 09:42:50 2013] Fit fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_src25 appears to have run properly
[Sun Jun  9 09:42:52 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sun Jun  9 09:42:52 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sun Jun  9 09:42:52 2013] Fit fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Sun Jun  9 09:43:44 2013] Spatial fit model total counts = 1336.090000, observed total counts = 1241.000000
[Sun Jun  9 09:43:44 2013] Offset between fit and detection position for source 97 = 0.563781 pixels
[Sun Jun  9 09:43:44 2013] 1064.716000 total counts/ 909.095000 bgd. counts: snr = 5.161353
Spatial fit parameters:
  Offset between fit and detection position for source 97 = 0.563781 pixels
  Position = (198.2, 249.8) = 18 0 55.31 -24 5 44.4
  Extent = 3.8 (3.2-4.4)", rotation angle = 0
  Source counts = 155.6 +/- 32.6
  Background counts = 909.1
  Rate = 0.005 +/- 0.001
[Sun Jun  9 09:43:45 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 09:43:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 09:43:45 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 09:43:45 2013] Source does appear to be extended
[Sun Jun  9 09:43:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 09:43:45 2013] Source is confused with source 94
[Sun Jun  9 09:45:02 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  9 09:45:02 2013] Initial guess for spatial extent in simple fitting = 3.79"
[Sun Jun  9 09:45:02 2013] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.197
[Sun Jun  9 09:45:02 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 3.79"
[Sun Jun  9 09:45:04 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_src23.ximg exists
[Sun Jun  9 09:45:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_src23.csv
[Sun Jun  9 09:45:04 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_src23_1.ximg exists
[Sun Jun  9 09:45:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_src23.csv
[Sun Jun  9 09:45:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 09:45:06 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Sun Jun  9 09:45:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src23.csv
[Sun Jun  9 09:45:06 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Sun Jun  9 09:45:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src23.csv
[Sun Jun  9 09:45:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 09:46:00 2013] Warning, spatial fit 23 centroid is now closest to src. 94
[Sun Jun  9 09:46:00 2013] Spatial fit model total counts = 2678.410000, observed total counts = 2529.000000
[Sun Jun  9 09:46:00 2013] Offset between fit and detection position for source 97 = 0.489946 pixels
[Sun Jun  9 09:46:00 2013] Warning, changing simple spatial fit ID from 23 to 34
[Sun Jun  9 09:46:00 2013] 1934.666000 total counts/ 1548.490000 bgd. counts: snr = 9.813662
Spatial fit parameters:
  Offset between fit and detection position for source 97 = 0.489946 pixels
  Position = (198.7, 249.8) = 18 0 55.16 -24 5 44.3
  Extent = 17.5 (15.2-21.5)", rotation angle = -0
  Source counts = 386.2 +/- 44.0
  Background counts = 1548.5
  Rate = 0.01 +/- 0.001
[Sun Jun  9 09:46:00 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 09:46:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 09:46:00 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 09:46:00 2013] Source does appear to be extended
[Sun Jun  9 09:46:00 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.41
[Sun Jun  9 09:46:00 2013] Source is asymmetric
[Sun Jun  9 09:47:33 2013] XMMSAS src. selection expression = ellipse(17234.916000, 21686.194000, 1047.018030, 257.868007, -0.000000, X, Y)
[Sun Jun  9 09:47:33 2013] Not overwriting source region fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src97_src.reg
[Sun Jun  9 09:47:33 2013] Extracting stamp from image fullrun_mos1_xmm0503850101_pi300-10000_cl_sm2.00.img.gz, (138, 190) - (259, 310)
[Sun Jun  9 09:47:33 2013] XMMSAS bgd. selection expression = annulus(17234.916000, 21686.194000, 1745.030050, 3490.060100, X, Y) && !ellipse(16407.208298, 24635.416229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17667.362800, 24746.395600, 636.369618, 636.369618, 0.000000, X, Y) && !ellipse(17136.294000, 24689.912200, 546.472016, 546.472016, 0.000000, X, Y) && !ellipse(16460.462875, 21521.470428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17172.924057, 22500.215118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20971.694000, 24670.598600, 869.400025, 869.400025, 0.000000, X, Y) && !ellipse(16643.581527, 22595.173584, 1376.664040, 1373.927119, 342.051200, X, Y) && !ellipse(19971.867889, 22020.617264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15984.680800, 18169.422800, 280.624808, 280.624808, 0.000000, X, Y) && !ellipse(17707.957596, 21777.313034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17328.502136, 20418.927032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21117.556800, 23257.775180, 1111.344032, 1111.344032, 0.000000, X, Y) && !ellipse(20273.804000, 24691.779200, 680.380820, 680.380820, 0.000000, X, Y) && !ellipse(17332.036000, 18336.835000, 751.604022, 751.604022, 0.000000, X, Y) && !ellipse(20455.936813, 22031.801575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17885.451800, 22973.603200, 1609.472046, 1609.472046, 0.000000, X, Y) && !ellipse(20920.063812, 22065.268219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16304.785800, 18219.924068, 1317.480038, 264.549608, 352.402760, X, Y) && !ellipse(16326.612228, 20215.229202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17220.856628, 22907.241730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20877.819800, 23135.074200, 1799.696052, 1799.696052, 0.000000, X, Y) && !ellipse(17618.286000, 22897.249200, 1641.928047, 1641.928047, 0.000000, X, Y) && !ellipse(18948.557205, 19226.967560, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 09:47:33 2013] Writing fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src97.gif
[Sun Jun  9 09:47:41 2013] ../../xmm0503850101/products/events/fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src97_src.evt and ../../xmm0503850101/products/events/fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src97_bgd.evt exist, delete to re-create
[Sun Jun  9 09:47:41 2013] Mean detx,y = (2808.79, 7345.14) 
[Sun Jun  9 09:47:41 2013] ../../xmm0503850101/products/images/fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src97_src.img and ../../xmm0503850101/products/images/fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src97_bgd.img exist, delete to re-create
[Sun Jun  9 09:47:41 2013] ../../xmm0503850101/products/spectra/fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src97_src_b10.pi.gz and ../../xmm0503850101/products/spectra/fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src97_bgd.pi exist, delete to re-create
[Sun Jun  9 09:47:41 2013] Setting source spectrum file to fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src97_src_b10.pi.gz
[Sun Jun  9 09:47:41 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src97_bgd.pi.gz
[Sun Jun  9 09:47:41 2013] ../../xmm0503850101/products/lightcurves/fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src97_src.lc and ../../xmm0503850101/products/lightcurves/fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src97_bgd.lc exist, delete to re-create
[Sun Jun  9 09:47:58 2013] fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src97.rmf exists, delete to re-create
[Sun Jun  9 09:47:58 2013] fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src97.arf exists, delete to re-create