[Sun Jun  9 09:41:06 2013] Detection parameters:
  Position = (204.1, 250.9) = 18 0 53.43 -24 5 38.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 283.9 +/- 23.0
  Background counts = 35.2
  Rate = 0.01 +/- 0.0009

[Sun Jun  9 09:41:08 2013] Off-axis axis estimate = 7.66'
[Sun Jun  9 09:42:49 2013] Using EEF radius (= 10.26 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 09:42:49 2013] Initial guess for spatial extent in simple fitting = 10.26"
[Sun Jun  9 09:42:49 2013] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.102
[Sun Jun  9 09:42:49 2013] Giving source the simple spatial ID 43 for pass 0, mean size = 10.26"
[Sun Jun  9 09:42:51 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_src43.ximg exists
[Sun Jun  9 09:42:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_src43.csv
[Sun Jun  9 09:42:51 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_src43_1.ximg exists
[Sun Jun  9 09:42:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_src43.csv
[Sun Jun  9 09:42:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 09:42:52 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Sun Jun  9 09:42:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src43.csv
[Sun Jun  9 09:42:52 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Sun Jun  9 09:42:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src43.csv
[Sun Jun  9 09:42:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 09:43:45 2013] Warning: source 43 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 94 at 16.275105 pixels away
[Sun Jun  9 09:43:45 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 09:43:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 09:43:45 2013] Assessing source extent using major
[Sun Jun  9 09:43:45 2013] Source does appear to be extended
[Sun Jun  9 09:43:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 09:43:45 2013] Source is confused with source 97
[Sun Jun  9 09:45:02 2013] Using EEF radius (= 10.26 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 09:45:02 2013] Initial guess for spatial extent in simple fitting = 10.26"
[Sun Jun  9 09:45:02 2013] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.102
[Sun Jun  9 09:45:02 2013] Giving source the simple spatial ID 41 for pass 1, mean size = 10.26"
[Sun Jun  9 09:45:04 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_src41.ximg exists
[Sun Jun  9 09:45:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_src41.csv
[Sun Jun  9 09:45:04 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_src41_1.ximg exists
[Sun Jun  9 09:45:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_src41.csv
[Sun Jun  9 09:45:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 09:45:06 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Sun Jun  9 09:45:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src41.csv
[Sun Jun  9 09:45:06 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Sun Jun  9 09:45:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src41.csv
[Sun Jun  9 09:45:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 09:46:00 2013] Source 94 is offset by 4.191214 and 1.156858 pixels which is larger than
2 X fitted extent = 1.238262 x 1.238262, not incorporating fit results
[Sun Jun  9 09:46:00 2013] Source 94 is offset by -1.580671 and 7.549299 pixels which is larger than
2 X fitted extent = 0.959733 x 0.959733, not incorporating fit results
[Sun Jun  9 09:46:00 2013] Source 94 is offset by 4.101007 and 3.886954 pixels which is larger than
2 X fitted extent = 4.015531 x 4.015531, not incorporating fit results
[Sun Jun  9 09:46:00 2013] Source 94 is offset by -3.339154 and -3.692218 pixels which is larger than
2 X fitted extent = 1.179545 x 1.179545, not incorporating fit results
[Sun Jun  9 09:46:00 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 09:46:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 09:46:00 2013] Assessing source extent using major
[Sun Jun  9 09:46:00 2013] Source does appear to be extended
[Sun Jun  9 09:46:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 09:47:34 2013] XMMSAS src. selection expression = ellipse(17707.957596, 21777.313034, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun  9 09:47:34 2013] Not overwriting source region fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src94_src.reg
[Sun Jun  9 09:47:34 2013] Extracting stamp from image fullrun_mos1_xmm0503850101_pi300-10000_cl_sm2.00.img.gz, (167, 213) - (242, 288)
[Sun Jun  9 09:47:34 2013] XMMSAS bgd. selection expression = annulus(17707.957596, 21777.313034, 1087.500000, 2175.000000, X, Y) && !ellipse(16407.208298, 24635.416229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16460.462875, 21521.470428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17234.916000, 21686.194000, 1396.024040, 343.824010, -0.000000, X, Y) && !ellipse(17172.924057, 22500.215118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16643.581527, 22595.173584, 1376.664040, 1373.927119, 342.051200, X, Y) && !ellipse(19971.867889, 22020.617264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17328.502136, 20418.927032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20455.936813, 22031.801575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17885.451800, 22973.603200, 1609.472046, 1609.472046, 0.000000, X, Y) && !ellipse(16326.612228, 20215.229202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17220.856628, 22907.241730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20877.819800, 23135.074200, 1799.696052, 1799.696052, 0.000000, X, Y) && !ellipse(17618.286000, 22897.249200, 1641.928047, 1641.928047, 0.000000, X, Y) && !ellipse(18948.557205, 19226.967560, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 09:47:34 2013] Writing fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src94.gif
[Sun Jun  9 09:47:41 2013] ../../xmm0503850101/products/events/fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src94_src.evt and ../../xmm0503850101/products/events/fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src94_bgd.evt exist, delete to re-create
[Sun Jun  9 09:47:41 2013] Mean detx,y = (2719.59, 7012.22) 
[Sun Jun  9 09:47:41 2013] ../../xmm0503850101/products/images/fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src94_src.img and ../../xmm0503850101/products/images/fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src94_bgd.img exist, delete to re-create
[Sun Jun  9 09:47:41 2013] ../../xmm0503850101/products/spectra/fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src94_src_b10.pi.gz and ../../xmm0503850101/products/spectra/fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src94_bgd.pi exist, delete to re-create
[Sun Jun  9 09:47:41 2013] Setting source spectrum file to fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src94_src_b10.pi.gz
[Sun Jun  9 09:47:41 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src94_bgd.pi.gz
[Sun Jun  9 09:47:41 2013] ../../xmm0503850101/products/lightcurves/fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src94_src.lc and ../../xmm0503850101/products/lightcurves/fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src94_bgd.lc exist, delete to re-create
[Sun Jun  9 09:47:58 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun  9 09:47:58 2013] rmf not generated due to insufficient counts
[Sun Jun  9 09:47:58 2013] fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src94.arf exists, delete to re-create