[Sun Jun  9 09:41:05 2013] Detection parameters:
  Position = (190.4, 263.8) = 18 0 57.77 -24 4 43.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 261.3 +/- 21.4
  Background counts = 31.1
  Rate = 0.01 +/- 0.0009

[Sun Jun  9 09:41:08 2013] Off-axis axis estimate = 8.22'
[Sun Jun  9 09:42:49 2013] Using EEF radius (= 10.54 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 09:42:49 2013] Initial guess for spatial extent in simple fitting = 10.54"
[Sun Jun  9 09:42:49 2013] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.878
[Sun Jun  9 09:42:49 2013] Giving source the simple spatial ID 50 for pass 0, mean size = 10.54"
[Sun Jun  9 09:42:51 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_src50.ximg exists
[Sun Jun  9 09:42:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_src50.csv
[Sun Jun  9 09:42:51 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_src50_1.ximg exists
[Sun Jun  9 09:42:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_src50.csv
[Sun Jun  9 09:42:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 09:42:53 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Sun Jun  9 09:42:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src50.csv
[Sun Jun  9 09:42:53 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Sun Jun  9 09:42:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src50.csv
[Sun Jun  9 09:42:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 09:43:45 2013] Spatial fit model total counts = 1319.350000, observed total counts = 1100.000000
[Sun Jun  9 09:43:45 2013] Poor agreement between spatial fit and data for source 78
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  9 09:43:45 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 09:43:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 09:43:45 2013] Assessing source extent using major
[Sun Jun  9 09:43:45 2013] Source does appear to be extended
[Sun Jun  9 09:43:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 09:43:45 2013] Source is confused with source 89
[Sun Jun  9 09:43:45 2013] Source is confused with source 76
[Sun Jun  9 09:45:02 2013] Using EEF radius (= 10.54 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 09:45:02 2013] Initial guess for spatial extent in simple fitting = 10.54"
[Sun Jun  9 09:45:02 2013] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.878
[Sun Jun  9 09:45:02 2013] Giving source the simple spatial ID 48 for pass 1, mean size = 10.54"
[Sun Jun  9 09:45:04 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_src48.ximg exists
[Sun Jun  9 09:45:04 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_src48_1.ximg exists
[Sun Jun  9 09:45:04 2013] Fit fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_src48 appears to have run properly
[Sun Jun  9 09:45:06 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Sun Jun  9 09:45:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src48.csv
[Sun Jun  9 09:45:06 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Sun Jun  9 09:45:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src48.csv
[Sun Jun  9 09:45:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 09:46:00 2013] Spatial fit model total counts = 1571.340000, observed total counts = 1573.000000
[Sun Jun  9 09:46:00 2013] Offset between fit and detection position for source 78 = 6.052384 pixels
[Sun Jun  9 09:46:00 2013] Warning, changing simple spatial fit ID from 48 to 26
[Sun Jun  9 09:46:00 2013] 185.970020 total counts/ 185.970000 bgd. counts: snr = 0.000001
Spatial fit parameters:
  Offset between fit and detection position for source 78 = 6.052384 pixels
  Position = (188.5, 269.5) = 18 0 58.38 -24 4 18.6
  Extent = 20.7" x 20.7", rotation angle = 360
  Source counts = 0.0 +/- 13.6
  Background counts = 186.0
  Rate = 6e-10 +/- 0.0004
  Deleting source due to low Poisson probability