[Sun Jun  9 09:41:04 2013] Detection parameters:
  Position = (221.7, 171.0) = 18 0 47.86 -24 11 26.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 292.2 +/- 21.9
  Background counts = 22.3
  Rate = 0.02 +/- 0.001

[Sun Jun  9 09:41:08 2013] Off-axis axis estimate = 10.78'
[Sun Jun  9 09:42:49 2013] Using EEF radius (= 11.82 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 09:42:49 2013] Initial guess for spatial extent in simple fitting = 11.82"
[Sun Jun  9 09:42:49 2013] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.014
[Sun Jun  9 09:42:49 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 11.82"
[Sun Jun  9 09:42:50 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_src20.ximg exists
[Sun Jun  9 09:42:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_src20.csv
[Sun Jun  9 09:42:50 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_src20_1.ximg exists
[Sun Jun  9 09:42:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_src20.csv
[Sun Jun  9 09:42:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 09:42:52 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sun Jun  9 09:42:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Sun Jun  9 09:42:52 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sun Jun  9 09:42:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Sun Jun  9 09:42:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 09:43:44 2013] Source 53 is offset by 4.186254 and 1.545507 pixels which is larger than
2 X fitted extent = 1.314612 x 1.314612, not incorporating fit results
[Sun Jun  9 09:43:44 2013] Spatial fit model total counts = 1187.910000, observed total counts = 1383.000000
[Sun Jun  9 09:43:44 2013] Poor agreement between spatial fit and data for source 53
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  9 09:43:45 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 09:43:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 09:43:45 2013] Assessing source extent using major
[Sun Jun  9 09:43:45 2013] Source does appear to be extended
[Sun Jun  9 09:43:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 09:43:45 2013] Source is confused with source 129
[Sun Jun  9 09:45:02 2013] Using EEF radius (= 11.82 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 09:45:02 2013] Initial guess for spatial extent in simple fitting = 11.82"
[Sun Jun  9 09:45:02 2013] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.014
[Sun Jun  9 09:45:02 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 11.82"
[Sun Jun  9 09:45:03 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_src18.ximg exists
[Sun Jun  9 09:45:04 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_src18.csv
[Sun Jun  9 09:45:04 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_src18_1.ximg exists
[Sun Jun  9 09:45:04 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_src18.csv
[Sun Jun  9 09:45:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 09:45:06 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Sun Jun  9 09:45:06 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Sun Jun  9 09:45:06 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Sun Jun  9 09:45:06 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Sun Jun  9 09:45:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 09:46:00 2013] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 53 at 15.826466 pixels away
[Sun Jun  9 09:46:00 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 09:46:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 09:46:00 2013] Assessing source extent using major
[Sun Jun  9 09:46:00 2013] Source does appear to be extended
[Sun Jun  9 09:46:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 09:47:33 2013] XMMSAS src. selection expression = ellipse(19236.734085, 14830.989090, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun  9 09:47:33 2013] Not overwriting source region fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src53_src.reg
[Sun Jun  9 09:47:33 2013] Extracting stamp from image fullrun_mos1_xmm0503850101_pi300-10000_cl_sm2.00.img.gz, (184, 134) - (259, 209)
[Sun Jun  9 09:47:33 2013] XMMSAS bgd. selection expression = annulus(19236.734085, 14830.989090, 1087.500000, 2175.000000, X, Y) && !ellipse(17048.747600, 15190.268000, 791.295223, 791.295223, 0.000000, X, Y) && !ellipse(16632.933270, 15126.854200, 1118.024032, 1118.024032, 0.000000, X, Y) && !ellipse(16509.165360, 15079.414600, 1982.264057, 390.380011, 347.253100, X, Y) && !ellipse(19582.254600, 15851.564000, 968.536028, 968.536028, 0.000000, X, Y) && !ellipse(22044.143600, 15894.818000, 1104.328032, 1104.328032, 0.000000, X, Y) && !ellipse(21961.820200, 15473.226600, 1673.824048, 1673.824048, 0.000000, X, Y) && !ellipse(17200.285461, 14458.691589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21420.166458, 13170.620056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21878.404602, 14928.995514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19766.448273, 14856.752167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16560.504379, 14315.031937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21623.721572, 13138.947244, 1458.109754, 286.899227, 15.141948, X, Y) && !ellipse(16304.785800, 18219.924068, 1317.480038, 264.549608, 352.402760, X, Y) && !ellipse(16337.719432, 12731.499424, 2116.392061, 264.549608, 349.777075, X, Y) && !ellipse(19156.418121, 13175.060593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17066.947235, 12893.521286, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 09:47:33 2013] Writing fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src53.gif
[Sun Jun  9 09:47:41 2013] ../../xmm0503850101/products/events/fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src53_src.evt and ../../xmm0503850101/products/events/fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src53_bgd.evt exist, delete to re-create
[Sun Jun  9 09:47:41 2013] Mean detx,y = (9523.01, 5284.99) 
[Sun Jun  9 09:47:41 2013] ../../xmm0503850101/products/images/fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src53_src.img and ../../xmm0503850101/products/images/fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src53_bgd.img exist, delete to re-create
[Sun Jun  9 09:47:41 2013] ../../xmm0503850101/products/spectra/fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src53_src_b10.pi.gz and ../../xmm0503850101/products/spectra/fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src53_bgd.pi exist, delete to re-create
[Sun Jun  9 09:47:41 2013] Setting source spectrum file to fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Sun Jun  9 09:47:41 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Sun Jun  9 09:47:41 2013] ../../xmm0503850101/products/lightcurves/fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src53_src.lc and ../../xmm0503850101/products/lightcurves/fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src53_bgd.lc exist, delete to re-create
[Sun Jun  9 09:47:58 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun  9 09:47:58 2013] rmf not generated due to insufficient counts
[Sun Jun  9 09:47:58 2013] fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src53.arf exists, delete to re-create