[Sun Jun  9 09:41:07 2013] Detection parameters:
  Position = (197.4, 211.1) = 18 0 55.57 -24 8 32.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 227.0 +/- 19.9
  Background counts = 26.4
  Rate = 0.01 +/- 0.001

[Sun Jun  9 09:41:08 2013] Off-axis axis estimate = 9.68'
[Sun Jun  9 09:42:49 2013] Using EEF radius (= 11.27 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 09:42:49 2013] Initial guess for spatial extent in simple fitting = 11.27"
[Sun Jun  9 09:42:49 2013] source mask rpix=2.6, npix_max = 38, mask sum = 34, frac = 0.890
[Sun Jun  9 09:42:49 2013] Giving source the simple spatial ID 53 for pass 0, mean size = 11.27"
[Sun Jun  9 09:42:51 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_src53.ximg exists
[Sun Jun  9 09:42:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_src53.csv
[Sun Jun  9 09:42:51 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_src53_1.ximg exists
[Sun Jun  9 09:42:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_src53.csv
[Sun Jun  9 09:42:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 09:42:53 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Sun Jun  9 09:42:53 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Sun Jun  9 09:42:53 2013] Fit fullrun_mos1_xmm0503850101_pi300-10000_cl_pass0_tfrozen_src53 appears to have run properly
[Sun Jun  9 09:43:45 2013] Warning, spatial fit 53 centroid is now closest to src. 107
[Sun Jun  9 09:43:45 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 09:43:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 09:43:45 2013] Assessing source extent using major
[Sun Jun  9 09:43:45 2013] Source does appear to be extended
[Sun Jun  9 09:43:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 09:45:02 2013] Using EEF radius (= 11.27 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 09:45:02 2013] Initial guess for spatial extent in simple fitting = 11.27"
[Sun Jun  9 09:45:02 2013] source mask rpix=2.6, npix_max = 38, mask sum = 34, frac = 0.890
[Sun Jun  9 09:45:02 2013] Giving source the simple spatial ID 51 for pass 1, mean size = 11.27"
[Sun Jun  9 09:45:04 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_src51.ximg exists
[Sun Jun  9 09:45:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_src51.csv
[Sun Jun  9 09:45:04 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_src51_1.ximg exists
[Sun Jun  9 09:45:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_src51.csv
[Sun Jun  9 09:45:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 09:45:06 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Sun Jun  9 09:45:06 2013] fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Sun Jun  9 09:45:06 2013] Fit fullrun_mos1_xmm0503850101_pi300-10000_cl_pass1_tfrozen_src51 appears to have run properly
[Sun Jun  9 09:46:00 2013] Spatial fit model total counts = 660.506000, observed total counts = 646.000000
[Sun Jun  9 09:46:00 2013] Offset between fit and detection position for source 114 = 2.392858 pixels
[Sun Jun  9 09:46:00 2013] 644.136000 total counts/ 370.649000 bgd. counts: snr = 14.205459
Spatial fit parameters:
  Offset between fit and detection position for source 114 = 2.392858 pixels
  Position = (199.8, 211.3) = 18 0 54.81 -24 8 31.7
  Extent = 9.4 (8.2-11.2)", rotation angle = 0
  Source counts = 273.5 +/- 25.4
  Background counts = 370.6
  Rate = 0.008 +/- 0.0008
[Sun Jun  9 09:46:00 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 09:46:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 09:46:00 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 09:46:00 2013] Source does appear to be extended
[Sun Jun  9 09:46:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 09:47:34 2013] XMMSAS src. selection expression = ellipse(17332.036000, 18336.835000, 563.703016, 563.703016, 0.000000, X, Y)
[Sun Jun  9 09:47:34 2013] Not overwriting source region fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src114_src.reg
[Sun Jun  9 09:47:34 2013] Extracting stamp from image fullrun_mos1_xmm0503850101_pi300-10000_cl_sm2.00.img.gz, (167, 179) - (232, 244)
[Sun Jun  9 09:47:35 2013] XMMSAS bgd. selection expression = annulus(17332.036000, 18336.835000, 939.505027, 1879.010054, X, Y) && !ellipse(16509.165360, 15079.414600, 1982.264057, 390.380011, 347.253100, X, Y) && !ellipse(19582.254600, 15851.564000, 968.536028, 968.536028, 0.000000, X, Y) && !ellipse(15984.680800, 18169.422800, 280.624808, 280.624808, 0.000000, X, Y) && !ellipse(17328.502136, 20418.927032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16304.785800, 18219.924068, 1317.480038, 264.549608, 352.402760, X, Y) && !ellipse(16326.612228, 20215.229202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18948.557205, 19226.967560, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 09:47:35 2013] Writing fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src114.gif
[Sun Jun  9 09:47:41 2013] ../../xmm0503850101/products/events/fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src114_src.evt and ../../xmm0503850101/products/events/fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src114_bgd.evt exist, delete to re-create
[Sun Jun  9 09:47:41 2013] Mean detx,y = (6154.60, 7277.52) 
[Sun Jun  9 09:47:41 2013] ../../xmm0503850101/products/images/fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src114_src.img and ../../xmm0503850101/products/images/fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src114_bgd.img exist, delete to re-create
[Sun Jun  9 09:47:41 2013] ../../xmm0503850101/products/spectra/fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src114_src_b10.pi.gz and ../../xmm0503850101/products/spectra/fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src114_bgd.pi exist, delete to re-create
[Sun Jun  9 09:47:41 2013] Setting source spectrum file to fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src114_src_b10.pi.gz
[Sun Jun  9 09:47:41 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src114_bgd.pi.gz
[Sun Jun  9 09:47:41 2013] ../../xmm0503850101/products/lightcurves/fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src114_src.lc and ../../xmm0503850101/products/lightcurves/fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src114_bgd.lc exist, delete to re-create
[Sun Jun  9 09:47:58 2013] fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src114.rmf exists, delete to re-create
[Sun Jun  9 09:47:58 2013] fullrun_mos1_xmm0503850101_pi300-10000_pass1_cl_src114.arf exists, delete to re-create