[Mon Mar 26 05:27:49 2012] Detection parameters:
  Position = (324.5, 320.0) = 19 21 8.55 -58 39 49.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 527.1 +/- 35.7
  Background counts = 22.0
  Rate = 0.03 +/- 0.002

[Mon Mar 26 05:27:50 2012] Off-axis axis estimate = 2.45'
[Mon Mar 26 08:48:00 2012] Using EEF radius (= 7.65 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 08:48:00 2012] Initial guess for spatial extent in simple fitting = 7.65"
[Mon Mar 26 08:48:00 2012] source mask rpix=1.8, npix_max = 20, mask sum = 12, frac = 0.588
[Mon Mar 26 08:48:00 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.65"
[Mon Mar 26 15:13:01 2012] fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_src3.ximg exists
[Mon Mar 26 15:13:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_src3.csv
[Mon Mar 26 15:13:01 2012] fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Mar 26 15:13:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_src3.csv
[Mon Mar 26 15:13:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 15:13:02 2012] fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Mar 26 15:13:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Mar 26 15:13:02 2012] fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Mar 26 15:13:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Mar 26 15:13:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 15:13:30 2012] Warning, spatial fit 3 centroid is now closest to src. 2
[Mon Mar 26 15:13:30 2012] Vigneting correction estimate = 1.000000
[Mon Mar 26 15:13:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 26 15:13:30 2012] Assessing source extent using major
[Mon Mar 26 15:13:30 2012] Source does appear to be extended
[Mon Mar 26 15:13:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 17:39:07 2012] Using EEF radius (= 7.65 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 17:39:07 2012] Initial guess for spatial extent in simple fitting = 7.65"
[Mon Mar 26 17:39:07 2012] source mask rpix=1.8, npix_max = 20, mask sum = 12, frac = 0.588
[Mon Mar 26 17:39:07 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.65"
[Mon Mar 26 19:01:26 2012] fullrun_mos2_xmm0503750401_pi300-10000_cl_pass1_src3.ximg exists
[Mon Mar 26 19:01:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503750401_pi300-10000_cl_pass1_src3.csv
[Mon Mar 26 19:01:26 2012] fullrun_mos2_xmm0503750401_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Mar 26 19:01:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503750401_pi300-10000_cl_pass1_src3.csv
[Mon Mar 26 19:01:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503750401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503750401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 19:01:26 2012] fullrun_mos2_xmm0503750401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Mar 26 19:01:26 2012] fullrun_mos2_xmm0503750401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Mar 26 19:01:26 2012] Fit fullrun_mos2_xmm0503750401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Mar 26 19:01:44 2012] Warning, spatial fit 3 centroid is now closest to src. 2
[Mon Mar 26 19:01:44 2012] Spatial fit model total counts = 2686.740000, observed total counts = 2193.000000
[Mon Mar 26 19:01:44 2012] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Mar 26 19:01:44 2012] Vigneting correction estimate = 1.000000
[Mon Mar 26 19:01:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 26 19:01:44 2012] Assessing source extent using major
[Mon Mar 26 19:01:44 2012] Source does appear to be extended
[Mon Mar 26 19:01:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 22:57:02 2012] XMMSAS src. selection expression = ellipse(28186.355957, 27787.172302, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Mar 26 22:57:02 2012] Writing source region out to fullrun_mos2_xmm0503750401_pi300-10000_pass1_cl_src8_src.reg
[Mon Mar 26 22:57:02 2012] Extracting stamp from image fullrun_mos2_xmm0503750401_pi300-10000_cl_sm2.00.img.gz, (287, 282) - (362, 357)
[Mon Mar 26 22:57:02 2012] XMMSAS bgd. selection expression = annulus(28186.355957, 27787.172302, 1087.500000, 2175.000000, X, Y) && !ellipse(27527.122000, 27272.580000, 559.973616, 559.973616, 0.000000, X, Y) && !ellipse(28556.180000, 26496.088000, 1124.672032, 1124.672032, 0.000000, X, Y) && !ellipse(28017.347412, 25961.449371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27573.997345, 24957.840332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25043.342000, 26101.414000, 1075.160031, 1075.160031, 0.000000, X, Y) && !ellipse(25152.292000, 27184.733400, 1136.936033, 1136.936033, 0.000000, X, Y) && !ellipse(28336.577515, 28525.289032, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar 26 22:57:02 2012] Writing fullrun_mos2_xmm0503750401_pi300-10000_pass1_cl_src8.gif
[Mon Mar 26 22:58:30 2012] Mean detx,y = (-552.77, 373.42) 
[Mon Mar 26 22:58:32 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 26 22:58:48 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 26 22:58:48 2012] Setting source spectrum file to fullrun_mos2_xmm0503750401_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon Mar 26 22:58:48 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503750401_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Mon Mar 26 23:17:31 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Mar 26 23:17:31 2012] rmf not generated due to insufficient counts
[Mon Mar 26 23:39:15 2012] Updating aperture counts using extracted products
[Mon Mar 26 23:39:15 2012] Error reading totcts from fullrun_mos2_xmm0503750401_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon Mar 26 23:39:16 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 23:39:16 2012] Using photon index=1.80, rate=0.0264, arf fullrun_mos2_xmm0503750401_pi300-10000_pass1_cl_src8.arf
[Mon Mar 26 23:39:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 23:39:16 2012] Updating source flux to 2.7e-13
[Mon Mar 26 23:39:59 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting