[Mon Mar 26 05:27:49 2012] Detection parameters:
  Position = (286.7, 313.0) = 19 21 29.64 -58 40 18.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 187.4 +/- 19.8
  Background counts = 22.5
  Rate = 0.009 +/- 0.0009

[Mon Mar 26 05:27:50 2012] Off-axis axis estimate = 1.35'
[Mon Mar 26 08:48:00 2012] Using EEF radius (= 7.11 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 08:48:00 2012] Initial guess for spatial extent in simple fitting = 7.11"
[Mon Mar 26 08:48:00 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.879
[Mon Mar 26 08:48:00 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 7.11"
[Mon Mar 26 15:13:01 2012] fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_src7.ximg exists
[Mon Mar 26 15:13:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_src7.csv
[Mon Mar 26 15:13:01 2012] fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_src7_1.ximg exists
[Mon Mar 26 15:13:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_src7.csv
[Mon Mar 26 15:13:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 15:13:02 2012] fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Mon Mar 26 15:13:02 2012] fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Mon Mar 26 15:13:02 2012] Fit fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Mon Mar 26 15:13:30 2012] Spatial fit model total counts = 709.448000, observed total counts = 694.000000
[Mon Mar 26 15:13:30 2012] Offset between fit and detection position for source 4 = 2.933870 pixels
[Mon Mar 26 15:13:30 2012] 640.012000 total counts/ 250.469000 bgd. counts: snr = 24.613786
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 2.933870 pixels
  Position = (289.7, 313.0) = 19 21 28.00 -58 40 19.3
  Extent = 14.2 (14.2-28.4)", rotation angle = 0
  Source counts = 389.5 +/- 25.3
  Background counts = 250.5
  Rate = 0.02 +/- 0.001
[Mon Mar 26 15:13:30 2012] Vigneting correction estimate = 1.000000
[Mon Mar 26 15:13:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 26 15:13:30 2012] Assessing source extent using major axis lower bound
[Mon Mar 26 15:13:30 2012] Source does appear to be extended
[Mon Mar 26 15:13:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 15:13:30 2012] Source is confused with source 5
[Mon Mar 26 17:39:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Mar 26 17:39:07 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Mar 26 17:39:07 2012] Initial guess for spatial extent in simple fitting = 14.21"
[Mon Mar 26 17:39:07 2012] source mask rpix=3.3, npix_max = 56, mask sum = 56, frac = 0.987
[Mon Mar 26 17:39:07 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 14.21"
[Mon Mar 26 19:01:26 2012] fullrun_mos2_xmm0503750401_pi300-10000_cl_pass1_src7.ximg exists
[Mon Mar 26 19:01:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503750401_pi300-10000_cl_pass1_src7.csv
[Mon Mar 26 19:01:26 2012] fullrun_mos2_xmm0503750401_pi300-10000_cl_pass1_src7_1.ximg exists
[Mon Mar 26 19:01:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503750401_pi300-10000_cl_pass1_src7.csv
[Mon Mar 26 19:01:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503750401_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503750401_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 19:01:27 2012] fullrun_mos2_xmm0503750401_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Mon Mar 26 19:01:27 2012] fullrun_mos2_xmm0503750401_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Mon Mar 26 19:01:27 2012] Fit fullrun_mos2_xmm0503750401_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Mon Mar 26 19:01:44 2012] Warning, spatial fit 7 centroid is now closest to src. 13
[Mon Mar 26 19:01:44 2012] Source 4 is offset by 6.699425 and -2.009478 pixels which is larger than
2 X fitted extent = 0.870607 x 0.870607, not incorporating fit results
[Mon Mar 26 19:01:44 2012] Vigneting correction estimate = 1.000000
[Mon Mar 26 19:01:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 26 19:01:45 2012] Assessing source extent using major axis lower bound
[Mon Mar 26 19:01:45 2012] Source does appear to be extended
[Mon Mar 26 19:01:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 22:57:02 2012] XMMSAS src. selection expression = ellipse(25152.292000, 27184.733400, 852.702025, 852.702025, 0.000000, X, Y)
[Mon Mar 26 22:57:02 2012] Writing source region out to fullrun_mos2_xmm0503750401_pi300-10000_pass1_cl_src4_src.reg
[Mon Mar 26 22:57:02 2012] Extracting stamp from image fullrun_mos2_xmm0503750401_pi300-10000_cl_sm2.00.img.gz, (241, 264) - (339, 362)
[Mon Mar 26 22:57:02 2012] XMMSAS bgd. selection expression = annulus(25152.292000, 27184.733400, 1421.170041, 2842.340082, X, Y) && !ellipse(27527.122000, 27272.580000, 559.973616, 559.973616, 0.000000, X, Y) && !ellipse(28556.180000, 26496.088000, 1124.672032, 1124.672032, 0.000000, X, Y) && !ellipse(28186.355957, 27787.172302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28017.347412, 25961.449371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27573.997345, 24957.840332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25043.342000, 26101.414000, 1075.160031, 1075.160031, 0.000000, X, Y) && !ellipse(28336.577515, 28525.289032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23979.592133, 27868.227692, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar 26 22:57:02 2012] Writing fullrun_mos2_xmm0503750401_pi300-10000_pass1_cl_src4.gif
[Mon Mar 26 23:00:36 2012] Mean detx,y = (1928.89, -493.35) 
[Mon Mar 26 23:00:38 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 26 23:00:57 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 26 23:00:57 2012] Setting source spectrum file to fullrun_mos2_xmm0503750401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Mar 26 23:00:57 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503750401_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon Mar 26 23:39:15 2012] Updating aperture counts using extracted products
[Mon Mar 26 23:39:15 2012] Error reading totcts from fullrun_mos2_xmm0503750401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Mar 26 23:39:16 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 23:39:16 2012] Using photon index=1.80, rate=0.017, arf fullrun_mos2_xmm0503750401_pi300-10000_pass1_cl_src4.arf
[Mon Mar 26 23:39:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 23:39:16 2012] Updating source flux to 1.6e-13
[Mon Mar 26 23:39:59 2012] Flag b found in src. 4 procflags, skipping spectral fitting
[Mon Mar 26 23:39:59 2012] Flag c found in src. 4 procflags, skipping spectral fitting