[Mon Mar 26 05:27:50 2012] Detection parameters:
  Position = (321.0, 363.1) = 19 21 10.57 -58 36 40.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.7 +/- 9.7
  Background counts = 17.3
  Rate = 0.002 +/- 0.0005

[Mon Mar 26 05:27:50 2012] Off-axis axis estimate = 4.97'
[Mon Mar 26 08:48:00 2012] Using EEF radius (= 8.91 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 08:48:00 2012] Initial guess for spatial extent in simple fitting = 8.91"
[Mon Mar 26 08:48:00 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.155
[Mon Mar 26 08:48:00 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 8.91"
[Mon Mar 26 15:13:01 2012] fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_src22.ximg exists
[Mon Mar 26 15:13:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_src22.csv
[Mon Mar 26 15:13:01 2012] fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_src22_1.ximg exists
[Mon Mar 26 15:13:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_src22.csv
[Mon Mar 26 15:13:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 15:13:02 2012] fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Mon Mar 26 15:13:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_tfrozen_src22.csv
[Mon Mar 26 15:13:02 2012] fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Mon Mar 26 15:13:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_tfrozen_src22.csv
[Mon Mar 26 15:13:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 15:13:30 2012] Spatial fit model total counts = 226.463000, observed total counts = 196.000000
[Mon Mar 26 15:13:30 2012] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Mar 26 15:13:30 2012] Vigneting correction estimate = 1.000000
[Mon Mar 26 15:13:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 26 15:13:30 2012] Assessing source extent using major
[Mon Mar 26 15:13:30 2012] Source does appear to be extended
[Mon Mar 26 15:13:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 15:13:30 2012] Deleting source due to low Poisson probability 0.9