[Mon Mar 26 05:27:49 2012] Detection parameters:
  Position = (314.7, 314.8) = 19 21 14.06 -58 40 12.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93361.3 +/- 359.5
  Background counts = 23.5
  Rate = 4 +/- 0.02

[Mon Mar 26 05:27:50 2012] Off-axis axis estimate = 1.67'
[Mon Mar 26 08:48:00 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 08:48:00 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Mon Mar 26 08:48:00 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.062
[Mon Mar 26 08:48:00 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Mon Mar 26 15:13:01 2012] fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_src1.ximg exists
[Mon Mar 26 15:13:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_src1.csv
[Mon Mar 26 15:13:01 2012] fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Mar 26 15:13:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_src1.csv
[Mon Mar 26 15:13:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 15:13:01 2012] fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Mar 26 15:13:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Mar 26 15:13:01 2012] fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Mar 26 15:13:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Mar 26 15:13:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503750401_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 15:13:30 2012] Spatial fit model total counts = 131997.000000, observed total counts = 91714.000000
[Mon Mar 26 15:13:30 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Mar 26 15:13:30 2012] Spatial fit model total counts = 16529.000000, observed total counts = 15586.000000
[Mon Mar 26 15:13:30 2012] Offset between fit and detection position for source 2 = 3.960795 pixels
[Mon Mar 26 15:13:30 2012] Warning, changing simple spatial fit ID from 1 to 2
[Mon Mar 26 15:13:30 2012] 13834.230000 total counts/ 4117.310000 bgd. counts: snr = 151.433459
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 3.960795 pixels
  Position = (318.1, 312.8) = 19 21 12.14 -58 40 20.1
  Extent = 12.3 (12.3-12.3)", rotation angle = 0
  Source counts = 9716.9 +/- 117.6
  Background counts = 4117.3
  Rate = 0.4 +/- 0.005
[Mon Mar 26 15:13:30 2012] Spatial fit model total counts = 26502.200000, observed total counts = 23781.000000
[Mon Mar 26 15:13:30 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Mar 26 15:13:30 2012] Vigneting correction estimate = 1.000000
[Mon Mar 26 15:13:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 26 15:13:30 2012] Assessing source extent using major axis lower bound
[Mon Mar 26 15:13:30 2012] Source does appear to be extended
[Mon Mar 26 15:13:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 15:13:30 2012] Source is confused with source 3
[Mon Mar 26 17:39:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Mar 26 17:39:07 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Mar 26 17:39:07 2012] Initial guess for spatial extent in simple fitting = 12.27"
[Mon Mar 26 17:39:07 2012] source mask rpix=2.8, npix_max = 44, mask sum = 25, frac = 0.567
[Mon Mar 26 17:39:07 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.27"
[Mon Mar 26 19:01:26 2012] fullrun_mos2_xmm0503750401_pi300-10000_cl_pass1_src1.ximg exists
[Mon Mar 26 19:01:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503750401_pi300-10000_cl_pass1_src1.csv
[Mon Mar 26 19:01:26 2012] fullrun_mos2_xmm0503750401_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Mar 26 19:01:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503750401_pi300-10000_cl_pass1_src1.csv
[Mon Mar 26 19:01:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503750401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503750401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 19:01:26 2012] fullrun_mos2_xmm0503750401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Mar 26 19:01:26 2012] fullrun_mos2_xmm0503750401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Mar 26 19:01:26 2012] Fit fullrun_mos2_xmm0503750401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Mar 26 19:01:44 2012] Source 2 is offset by 3.622069 and -1.777320 pixels which is larger than
2 X fitted extent = 3.618754 x 3.618754, not incorporating fit results
[Mon Mar 26 19:01:44 2012] Spatial fit model total counts = 21686.200000, observed total counts = 23781.000000
[Mon Mar 26 19:01:44 2012] Offset between fit and detection position for source 2 = 1.640989 pixels
[Mon Mar 26 19:01:44 2012] Warning, changing simple spatial fit ID from 1 to 3
[Mon Mar 26 19:01:44 2012] 10864.710000 total counts/ 1773.310000 bgd. counts: snr = 215.892937
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.640989 pixels
  Position = (317.0, 314.0) = 19 21 12.78 -58 40 14.9
  Extent = 7.0 (6.8-7.2)", rotation angle = 0
  Source counts = 9091.4 +/- 104.2
  Background counts = 1773.3
  Rate = 0.4 +/- 0.005
[Mon Mar 26 19:01:44 2012] Vigneting correction estimate = 1.000000
[Mon Mar 26 19:01:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 26 19:01:44 2012] Assessing source extent using major axis lower bound
[Mon Mar 26 19:01:44 2012] Source does appear to be extended
[Mon Mar 26 19:01:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 22:57:01 2012] Counts = 9091.400000, rescaling region sizes by 2.000000
[Mon Mar 26 22:57:01 2012] XMMSAS src. selection expression = ellipse(27527.122000, 27272.580000, 839.960424, 839.960424, 0.000000, X, Y)
[Mon Mar 26 22:57:01 2012] Writing source region out to fullrun_mos2_xmm0503750401_pi300-10000_pass1_cl_src2_src.reg
[Mon Mar 26 22:57:01 2012] Extracting stamp from image fullrun_mos2_xmm0503750401_pi300-10000_cl_sm2.00.img.gz, (269, 266) - (365, 362)
[Mon Mar 26 22:57:02 2012] XMMSAS bgd. selection expression = annulus(27527.122000, 27272.580000, 2799.868081, 5599.736161, X, Y) && !ellipse(28556.180000, 26496.088000, 1124.672032, 1124.672032, 0.000000, X, Y) && !ellipse(28186.355957, 27787.172302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28017.347412, 25961.449371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27573.997345, 24957.840332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25043.342000, 26101.414000, 1075.160031, 1075.160031, 0.000000, X, Y) && !ellipse(25152.292000, 27184.733400, 1136.936033, 1136.936033, 0.000000, X, Y) && !ellipse(28336.577515, 28525.289032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23979.592133, 27868.227692, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar 26 22:57:02 2012] Writing fullrun_mos2_xmm0503750401_pi300-10000_pass1_cl_src2.gif
[Mon Mar 26 22:57:18 2012] Mean detx,y = (-16.31, -47.04) 
[Mon Mar 26 22:57:21 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 26 22:57:50 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 26 22:57:53 2012] Setting source spectrum file to fullrun_mos2_xmm0503750401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Mar 26 22:57:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503750401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Mar 26 23:39:15 2012] Updating aperture counts using extracted products
[Mon Mar 26 23:39:15 2012] Error reading totcts from fullrun_mos2_xmm0503750401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Mar 26 23:39:16 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 23:39:16 2012] Using photon index=1.80, rate=0.397, arf fullrun_mos2_xmm0503750401_pi300-10000_pass1_cl_src2.arf
[Mon Mar 26 23:39:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 23:39:16 2012] Updating source flux to 4.1e-12
[Mon Mar 26 23:39:59 2012] Flag b found in src. 2 procflags, skipping spectral fitting
[Mon Mar 26 23:39:59 2012] Flag p found in src. 2 procflags, skipping spectral fitting
[Mon Mar 26 23:39:59 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Mon Mar 26 23:42:26 2012] Reading fit data from xmm0503750401/analysis//spectral/fullrun_mos2_xmm0503750401_pi300-10000_pass1_cl_src2_pl.csv
[Mon Mar 26 23:42:26 2012] Spectral fit parameter nH value = 2.46211e+20
[Mon Mar 26 23:42:26 2012] Spectral fit parameter PhoIndex value = 1.9988
[Mon Mar 26 23:42:26 2012] Failed to get F(0.3-8.0) from xmm0503750401/analysis//spectral/fullrun_mos2_xmm0503750401_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Mon Mar 26 23:42:26 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 23:42:26 2012] Using Nh = 2.5e+20, photon index=2.00, rate=0.397, arf fullrun_mos2_xmm0503750401_pi300-10000_pass1_cl_src2.arf
[Mon Mar 26 23:42:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 23:42:26 2012] Updating source flux to 3.8e-12