[Mon Mar 26 05:26:59 2012] Detection parameters:
  Position = (314.6, 314.2) = 19 21 14.07 -58 40 13.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 101926.1 +/- 376.6
  Background counts = 25.2
  Rate = 4 +/- 0.02

[Mon Mar 26 05:27:00 2012] Off-axis axis estimate = 1.64'
[Mon Mar 26 07:23:20 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 07:23:20 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Mon Mar 26 07:23:20 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.066
[Mon Mar 26 07:23:20 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Mon Mar 26 08:47:59 2012] fullrun_mos1_xmm0503750401_pi300-10000_cl_pass0_src1.ximg exists
[Mon Mar 26 08:48:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503750401_pi300-10000_cl_pass0_src1.csv
[Mon Mar 26 08:48:00 2012] fullrun_mos1_xmm0503750401_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Mar 26 08:48:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503750401_pi300-10000_cl_pass0_src1.csv
[Mon Mar 26 08:48:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503750401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503750401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 08:48:00 2012] fullrun_mos1_xmm0503750401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Mar 26 08:48:00 2012] fullrun_mos1_xmm0503750401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Mar 26 08:48:00 2012] Fit fullrun_mos1_xmm0503750401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Mar 26 15:13:22 2012] Spatial fit model total counts = 98886.700000, observed total counts = 98846.000000
[Mon Mar 26 15:13:22 2012] Offset between fit and detection position for source 1 = 0.320214 pixels
[Mon Mar 26 15:13:22 2012] 99102.800000 total counts/ 21821.800000 bgd. counts: snr = 523.151467
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.320214 pixels
  Position = (314.4, 314.5) = 19 21 14.19 -58 40 13.1
  Extent = 7.3 (7.3-7.4)", rotation angle = 0
  Source counts = 77281.0 +/- 314.8
  Background counts = 21821.8
  Rate = 3 +/- 0.01
[Mon Mar 26 15:13:22 2012] Vigneting correction estimate = 1.000000
[Mon Mar 26 15:13:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 26 15:13:22 2012] Assessing source extent using major axis lower bound
[Mon Mar 26 15:13:22 2012] Source does appear to be extended
[Mon Mar 26 15:13:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 17:22:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Mar 26 17:22:56 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Mon Mar 26 17:22:56 2012] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.314
[Mon Mar 26 17:22:56 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.31"
[Mon Mar 26 17:39:07 2012] fullrun_mos1_xmm0503750401_pi300-10000_cl_pass1_src1.ximg exists
[Mon Mar 26 17:39:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503750401_pi300-10000_cl_pass1_src1.csv
[Mon Mar 26 17:39:07 2012] fullrun_mos1_xmm0503750401_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Mar 26 17:39:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503750401_pi300-10000_cl_pass1_src1.csv
[Mon Mar 26 17:39:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503750401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503750401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 17:39:07 2012] fullrun_mos1_xmm0503750401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Mar 26 17:39:07 2012] fullrun_mos1_xmm0503750401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Mar 26 17:39:07 2012] Fit fullrun_mos1_xmm0503750401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Mar 26 19:01:39 2012] Spatial fit model total counts = 98886.700000, observed total counts = 98846.000000
[Mon Mar 26 19:01:39 2012] Offset between fit and detection position for source 1 = 0.000000 pixels
[Mon Mar 26 19:01:39 2012] 99102.800000 total counts/ 21821.800000 bgd. counts: snr = 523.151467
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000000 pixels
  Position = (314.4, 314.5) = 19 21 14.19 -58 40 13.1
  Extent = 7.3 (7.3-7.4)", rotation angle = 0
  Source counts = 77281.0 +/- 314.8
  Background counts = 21821.8
  Rate = 3 +/- 0.01
[Mon Mar 26 19:01:39 2012] Vigneting correction estimate = 1.000000
[Mon Mar 26 19:01:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 26 19:01:39 2012] Assessing source extent using major axis lower bound
[Mon Mar 26 19:01:39 2012] Source does appear to be extended
[Mon Mar 26 19:01:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 22:27:42 2012] Counts = 77281.000000, rescaling region sizes by 3.000000
[Mon Mar 26 22:27:42 2012] XMMSAS src. selection expression = ellipse(27307.399000, 27308.806800, 1316.260838, 1316.260838, 0.000000, X, Y)
[Mon Mar 26 22:27:42 2012] Writing source region out to fullrun_mos1_xmm0503750401_pi300-10000_pass1_cl_src1_src.reg
[Mon Mar 26 22:27:42 2012] Extracting stamp from image fullrun_mos1_xmm0503750401_pi300-10000_cl_sm2.00.img.gz, (239, 239) - (390, 390)
[Mon Mar 26 22:27:42 2012] XMMSAS bgd. selection expression = annulus(27307.399000, 27308.806800, 6581.304189, 13162.608379, X, Y) && !ellipse(17799.953380, 21388.088800, 515.380015, 515.380015, 0.000000, X, Y)
[Mon Mar 26 22:27:42 2012] Writing fullrun_mos1_xmm0503750401_pi300-10000_pass1_cl_src1.gif
[Mon Mar 26 22:28:02 2012] Mean detx,y = (154.15, -163.37) 
[Mon Mar 26 22:28:06 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 26 22:34:57 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 26 22:34:58 2012] Setting source spectrum file to fullrun_mos1_xmm0503750401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Mar 26 22:34:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0503750401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Mar 26 23:39:15 2012] Updating aperture counts using extracted products
[Mon Mar 26 23:39:15 2012] Error reading totcts from fullrun_mos1_xmm0503750401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Mar 26 23:39:15 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 23:39:15 2012] Using photon index=1.80, rate=3.25, arf fullrun_mos1_xmm0503750401_pi300-10000_pass1_cl_src1.arf
[Mon Mar 26 23:39:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 23:39:15 2012] Updating source flux to 2.8e-11
[Mon Mar 26 23:39:59 2012] Reading fit data from xmm0503750401/analysis//spectral/fullrun_mos1_xmm0503750401_pi300-10000_pass1_cl_src1_pl.csv
[Mon Mar 26 23:39:59 2012] Spectral fit parameter nH value = 1.40499e+20
[Mon Mar 26 23:39:59 2012] Spectral fit parameter PhoIndex value = 2.0043
[Mon Mar 26 23:39:59 2012] Failed to get F(0.3-8.0) from xmm0503750401/analysis//spectral/fullrun_mos1_xmm0503750401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Mar 26 23:39:59 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 23:39:59 2012] Using Nh = 1.4e+20, photon index=2.00, rate=3.25, arf fullrun_mos1_xmm0503750401_pi300-10000_pass1_cl_src1.arf
[Mon Mar 26 23:39:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 23:39:59 2012] Updating source flux to 2.6e-11