[Fri May 18 09:23:01 2012] Detection parameters:
  Position = (280.6, 209.4) = 19 21 33.18 -58 47 50.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.9 +/- 11.3
  Background counts = 31.0
  Rate = 0.004 +/- 0.001

[Fri May 18 09:23:01 2012] Off-axis axis estimate = 6.58'
[Fri May 18 09:27:56 2012] Using EEF radius (= 9.72 ")to estimate initial spatial extent for simple fitting
[Fri May 18 09:27:56 2012] Initial guess for spatial extent in simple fitting = 9.72"
[Fri May 18 09:27:56 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.836
[Fri May 18 09:27:56 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 9.72"
[Fri May 18 12:58:44 2012] fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_src43.ximg exists
[Fri May 18 12:58:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_src43.csv
[Fri May 18 12:58:44 2012] fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_src43_1.ximg exists
[Fri May 18 12:58:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_src43.csv
[Fri May 18 12:58:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 12:58:45 2012] fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Fri May 18 12:58:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src43.csv
[Fri May 18 12:58:45 2012] fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Fri May 18 12:58:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src43.csv
[Fri May 18 12:58:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 19:05:53 2012] Spatial fit model total counts = 294.188000, observed total counts = 263.000000
[Fri May 18 19:05:53 2012] Poor agreement between spatial fit and data for source 44
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 18 19:05:53 2012] Vigneting correction estimate = 1.000000
[Fri May 18 19:05:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 19:05:53 2012] Assessing source extent using major
[Fri May 18 19:05:53 2012] Source does appear to be extended
[Fri May 18 19:05:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 19:05:53 2012] Deleting source due to low Poisson probability 0.8