[Fri May 18 09:23:00 2012] Detection parameters:
  Position = (306.0, 243.0) = 19 21 18.97 -58 45 23.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 954.8 +/- 41.3
  Background counts = 40.4
  Rate = 0.07 +/- 0.003

[Fri May 18 09:23:01 2012] Off-axis axis estimate = 4.06'
[Fri May 18 09:27:56 2012] Using EEF radius (= 8.46 ")to estimate initial spatial extent for simple fitting
[Fri May 18 09:27:56 2012] Initial guess for spatial extent in simple fitting = 8.46"
[Fri May 18 09:27:56 2012] source mask rpix=1.9, npix_max = 23, mask sum = 16, frac = 0.670
[Fri May 18 09:27:56 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 8.46"
[Fri May 18 12:58:44 2012] fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_src35.ximg exists
[Fri May 18 12:58:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_src35.csv
[Fri May 18 12:58:44 2012] fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_src35_1.ximg exists
[Fri May 18 12:58:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_src35.csv
[Fri May 18 12:58:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 12:58:45 2012] fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Fri May 18 12:58:45 2012] fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Fri May 18 12:58:45 2012] Fit fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Fri May 18 19:05:53 2012] Warning, spatial fit 35 centroid is now closest to src. 34
[Fri May 18 19:05:53 2012] Source 36 is offset by 8.999746 and -2.954092 pixels which is larger than
2 X fitted extent = 7.971494 x 7.971494, not incorporating fit results
[Fri May 18 19:05:53 2012] Vigneting correction estimate = 1.000000
[Fri May 18 19:05:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 19:05:53 2012] Assessing source extent using major
[Fri May 18 19:05:53 2012] Source does appear to be extended
[Fri May 18 19:05:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 19:05:53 2012] Source is confused with source 34
[Fri May 18 19:05:53 2012] Source is confused with source 37
[Fri May 18 19:06:22 2012] Using EEF radius (= 8.46 ")to estimate initial spatial extent for simple fitting
[Fri May 18 19:06:22 2012] Initial guess for spatial extent in simple fitting = 8.46"
[Fri May 18 19:06:22 2012] source mask rpix=1.9, npix_max = 23, mask sum = 16, frac = 0.670
[Fri May 18 19:06:22 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 8.46"
[Fri May 18 21:23:54 2012] fullrun_pn_xmm0503750301_pi300-10000_cl_pass1_src25.ximg exists
[Fri May 18 21:23:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503750301_pi300-10000_cl_pass1_src25.csv
[Fri May 18 21:23:54 2012] fullrun_pn_xmm0503750301_pi300-10000_cl_pass1_src25_1.ximg exists
[Fri May 18 21:23:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503750301_pi300-10000_cl_pass1_src25.csv
[Fri May 18 21:23:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503750301_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503750301_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 21:23:54 2012] fullrun_pn_xmm0503750301_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Fri May 18 21:23:54 2012] fullrun_pn_xmm0503750301_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Fri May 18 21:23:54 2012] Fit fullrun_pn_xmm0503750301_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Sat May 19 06:33:37 2012] Spatial fit model total counts = 2980.180000, observed total counts = 2987.000000
[Sat May 19 06:33:37 2012] Offset between fit and detection position for source 36 = 1.117729 pixels
[Sat May 19 06:33:37 2012] 1709.086000 total counts/ 661.006000 bgd. counts: snr = 40.765402
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 1.117729 pixels
  Position = (306.1, 244.1) = 19 21 18.96 -58 45 19.5
  Extent = 9.3 (8.7-10.0)", rotation angle = 0
  Source counts = 1048.1 +/- 41.3
  Background counts = 661.0
  Rate = 0.05 +/- 0.002
[Sat May 19 06:33:37 2012] Vigneting correction estimate = 1.000000
[Sat May 19 06:33:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 06:33:37 2012] Assessing source extent using major axis lower bound
[Sat May 19 06:33:37 2012] Source does appear to be extended
[Sat May 19 06:33:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 06:33:49 2012] Counts = 1048.080000, rescaling region sizes by 2.000000
[Sat May 19 06:33:49 2012] XMMSAS src. selection expression = ellipse(26578.940300, 21191.212660, 1117.551632, 1117.551632, 0.000000, X, Y)
[Sat May 19 06:33:49 2012] Writing source region out to fullrun_pn_xmm0503750301_pi300-10000_pass1_cl_src36_src.reg
[Sat May 19 06:33:49 2012] Extracting stamp from image fullrun_pn_xmm0503750301_pi300-10000_cl_sm2.00.img.gz, (242, 180) - (370, 308)
[Sat May 19 06:33:49 2012] XMMSAS bgd. selection expression = annulus(26578.940300, 21191.212660, 3725.172107, 7450.344214, X, Y) && !ellipse(25611.148200, 13557.254000, 550.039216, 550.039216, 0.000000, X, Y) && !ellipse(25929.710600, 16057.366000, 967.488028, 967.488028, 0.000000, X, Y) && !ellipse(25800.370873, 14949.952854, 779.428822, 435.282535, 100.727879, X, Y) && !ellipse(25692.311707, 14130.918930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27353.106800, 27327.606400, 1878.193982, 1878.193982, 0.000000, X, Y) && !ellipse(25582.449249, 28943.543762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26663.938263, 28828.931458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27301.633820, 28781.565735, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28795.056000, 29100.620000, 1316.680038, 1316.680038, 356.529000, X, Y) && !ellipse(29399.776031, 28472.034454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24019.600769, 27870.588013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22875.630951, 25634.896698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27111.619600, 25133.454000, 1791.968052, 1791.968052, 0.000000, X, Y) && !ellipse(26899.107645, 23746.388376, 1684.760048, 400.080277, 99.069179, X, Y) && !ellipse(26864.528350, 23462.848418, 1684.136048, 417.382266, 98.993782, X, Y) && !ellipse(26803.120945, 22991.271675, 1242.080036, 442.679498, 102.242131, X, Y) && !ellipse(26722.931600, 22394.863860, 1684.760048, 452.277613, 99.414970, X, Y) && !ellipse(26633.490387, 21702.627060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20842.730774, 21335.828125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26506.640237, 20667.956436, 1387.040040, 449.129220, 100.513836, X, Y) && !ellipse(26381.737820, 19737.986600, 731.954421, 731.954421, 0.000000, X, Y) && !ellipse(26339.223800, 19359.386000, 667.532019, 667.532019, 0.000000, X, Y) && !ellipse(26258.858000, 18684.888800, 646.617619, 646.617619, 0.000000, X, Y) && !ellipse(26229.414200, 18405.750200, 670.015219, 670.015219, 0.000000, X, Y) && !ellipse(26122.999939, 17697.402527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26056.802094, 17090.061920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25993.964000, 16654.942602, 574.746417, 574.746417, 0.000000, X, Y) && !ellipse(31193.017334, 15299.576538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25859.902466, 15611.172104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25569.089400, 13287.190000, 794.251223, 794.251223, 0.000000, X, Y)
[Sat May 19 06:33:49 2012] Writing fullrun_pn_xmm0503750301_pi300-10000_pass1_cl_src36.gif
[Sat May 19 08:04:22 2012] Mean detx,y = (189.58, 6074.45) 
[Sat May 19 08:04:25 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 19 08:06:12 2012] Binned source spectrum to 10 counts/bin
[Sat May 19 08:06:13 2012] Setting source spectrum file to fullrun_pn_xmm0503750301_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Sat May 19 08:06:13 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503750301_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Sat May 19 21:44:46 2012] Updating aperture counts using extracted products
[Sat May 19 21:44:46 2012] Error reading totcts from fullrun_pn_xmm0503750301_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Sat May 19 21:44:46 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 19 21:44:46 2012] Using photon index=1.80, rate=0.0523, arf fullrun_pn_xmm0503750301_pi300-10000_pass1_cl_src36.arf
[Sat May 19 21:44:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 19 21:44:46 2012] Updating source flux to 1.5e-13
[Sat May 19 21:46:34 2012] Flag b found in src. 36 procflags, skipping spectral fitting
[Sat May 19 21:46:34 2012] Flag c found in src. 36 procflags, skipping spectral fitting