[Fri May 18 09:22:59 2012] Detection parameters:
  Position = (327.1, 329.6) = 19 21 7.26 -58 39 12.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 465.5 +/- 35.6
  Background counts = 60.2
  Rate = 0.03 +/- 0.002

[Fri May 18 09:23:01 2012] Off-axis axis estimate = 3.07'
[Fri May 18 09:27:56 2012] Using EEF radius (= 7.96 ")to estimate initial spatial extent for simple fitting
[Fri May 18 09:27:56 2012] Initial guess for spatial extent in simple fitting = 7.96"
[Fri May 18 09:27:56 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.737
[Fri May 18 09:27:56 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 7.96"
[Fri May 18 12:58:44 2012] fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_src19.ximg exists
[Fri May 18 12:58:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_src19.csv
[Fri May 18 12:58:44 2012] fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_src19_1.ximg exists
[Fri May 18 12:58:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_src19.csv
[Fri May 18 12:58:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 12:58:45 2012] fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Fri May 18 12:58:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src19.csv
[Fri May 18 12:58:45 2012] fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Fri May 18 12:58:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src19.csv
[Fri May 18 12:58:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 19:05:53 2012] Warning, spatial fit 19 centroid is now closest to src. 21
[Fri May 18 19:05:53 2012] Spatial fit model total counts = 2615.820000, observed total counts = 2121.000000
[Fri May 18 19:05:53 2012] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 18 19:05:53 2012] Vigneting correction estimate = 1.000000
[Fri May 18 19:05:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 19:05:53 2012] Assessing source extent using major
[Fri May 18 19:05:53 2012] Source does appear to be extended
[Fri May 18 19:05:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 19:06:22 2012] Using EEF radius (= 7.96 ")to estimate initial spatial extent for simple fitting
[Fri May 18 19:06:22 2012] Initial guess for spatial extent in simple fitting = 7.96"
[Fri May 18 19:06:22 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.737
[Fri May 18 19:06:22 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 7.96"
[Fri May 18 21:23:53 2012] fullrun_pn_xmm0503750301_pi300-10000_cl_pass1_src13.ximg exists
[Fri May 18 21:23:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503750301_pi300-10000_cl_pass1_src13.csv
[Fri May 18 21:23:53 2012] fullrun_pn_xmm0503750301_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri May 18 21:23:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503750301_pi300-10000_cl_pass1_src13.csv
[Fri May 18 21:23:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503750301_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503750301_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 21:23:54 2012] fullrun_pn_xmm0503750301_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri May 18 21:23:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503750301_pi300-10000_cl_pass1_tfrozen_src13.csv
[Fri May 18 21:23:54 2012] fullrun_pn_xmm0503750301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri May 18 21:23:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503750301_pi300-10000_cl_pass1_tfrozen_src13.csv
[Fri May 18 21:23:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503750301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503750301_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 06:33:37 2012] Warning, spatial fit 13 centroid is now closest to src. 19
[Sat May 19 06:33:37 2012] Spatial fit model total counts = 1998.650000, observed total counts = 2121.000000
[Sat May 19 06:33:37 2012] Offset between fit and detection position for source 20 = 7.069079 pixels
[Sat May 19 06:33:37 2012] Warning, changing simple spatial fit ID from 13 to 14
[Sat May 19 06:33:37 2012] 1938.106000 total counts/ 850.766000 bgd. counts: snr = 37.278661
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 7.069079 pixels
  Position = (331.5, 335.0) = 19 21 4.77 -58 38 44.0
  Extent = 16.5" x 16.5", rotation angle = 357
  Source counts = 1087.3 +/- 44.0
  Background counts = 850.8
  Rate = 0.05 +/- 0.002
[Sat May 19 06:33:37 2012] Vigneting correction estimate = 1.000000
[Sat May 19 06:33:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 06:33:37 2012] Assessing source extent using major
[Sat May 19 06:33:37 2012] Source does appear to be extended
[Sat May 19 06:33:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 06:33:37 2012] Source is confused with source 21
[Sat May 19 06:33:49 2012] Counts = 1087.340000, rescaling region sizes by 2.000000
[Sat May 19 06:33:49 2012] XMMSAS src. selection expression = ellipse(28795.056000, 29100.620000, 1975.020057, 1975.020057, 356.529000, X, Y)
[Sat May 19 06:33:49 2012] Writing source region out to fullrun_pn_xmm0503750301_pi300-10000_pass1_cl_src20_src.reg
[Sat May 19 06:33:49 2012] Extracting stamp from image fullrun_pn_xmm0503750301_pi300-10000_cl_sm2.00.img.gz, (218, 222) - (445, 449)
[Sat May 19 06:33:49 2012] XMMSAS bgd. selection expression = annulus(28795.056000, 29100.620000, 6583.400189, 13166.800379, X, Y) && !ellipse(17846.332000, 21410.168600, 439.027213, 439.027213, 0.000000, X, Y) && !ellipse(25929.710600, 16057.366000, 967.488028, 967.488028, 0.000000, X, Y) && !ellipse(27353.106800, 27327.606400, 1878.193982, 1878.193982, 0.000000, X, Y) && !ellipse(17025.697372, 35972.375397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26439.570840, 31965.591200, 401.248012, 401.248012, 0.000000, X, Y) && !ellipse(25582.449249, 28943.543762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26663.938263, 28828.931458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27301.633820, 28781.565735, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29399.776031, 28472.034454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34917.258789, 27738.792358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24019.600769, 27870.588013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22875.630951, 25634.896698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27111.619600, 25133.454000, 1791.968052, 1791.968052, 0.000000, X, Y) && !ellipse(26899.107645, 23746.388376, 1684.760048, 400.080277, 99.069179, X, Y) && !ellipse(26864.528350, 23462.848418, 1684.136048, 417.382266, 98.993782, X, Y) && !ellipse(26803.120945, 22991.271675, 1242.080036, 442.679498, 102.242131, X, Y) && !ellipse(26722.931600, 22394.863860, 1684.760048, 452.277613, 99.414970, X, Y) && !ellipse(26633.490387, 21702.627060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20842.730774, 21335.828125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26578.940300, 21191.212660, 745.034421, 745.034421, 0.000000, X, Y) && !ellipse(26506.640237, 20667.956436, 1387.040040, 449.129220, 100.513836, X, Y) && !ellipse(26381.737820, 19737.986600, 731.954421, 731.954421, 0.000000, X, Y) && !ellipse(26339.223800, 19359.386000, 667.532019, 667.532019, 0.000000, X, Y) && !ellipse(26258.858000, 18684.888800, 646.617619, 646.617619, 0.000000, X, Y) && !ellipse(26229.414200, 18405.750200, 670.015219, 670.015219, 0.000000, X, Y) && !ellipse(26122.999939, 17697.402527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26056.802094, 17090.061920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25993.964000, 16654.942602, 574.746417, 574.746417, 0.000000, X, Y) && !ellipse(31193.017334, 15299.576538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25859.902466, 15611.172104, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 19 06:33:49 2012] Writing fullrun_pn_xmm0503750301_pi300-10000_pass1_cl_src20.gif
[Sat May 19 06:55:30 2012] Mean detx,y = (706.92, -857.97) 
[Sat May 19 06:55:36 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 19 07:03:14 2012] Binned source spectrum to 10 counts/bin
[Sat May 19 07:03:14 2012] Setting source spectrum file to fullrun_pn_xmm0503750301_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sat May 19 07:03:14 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503750301_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Sat May 19 21:44:45 2012] Updating aperture counts using extracted products
[Sat May 19 21:44:45 2012] Error reading totcts from fullrun_pn_xmm0503750301_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sat May 19 21:44:46 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 19 21:44:46 2012] Using photon index=1.80, rate=0.0543, arf fullrun_pn_xmm0503750301_pi300-10000_pass1_cl_src20.arf
[Sat May 19 21:44:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 19 21:44:46 2012] Updating source flux to 1.2e-13
[Sat May 19 21:46:34 2012] Flag p found in src. 20 procflags, skipping spectral fitting
[Sat May 19 21:46:34 2012] Flag c found in src. 20 procflags, skipping spectral fitting