[Fri May 18 09:22:59 2012] Detection parameters:
  Position = (294.6, 333.2) = 19 21 25.35 -58 38 57.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.8 +/- 18.6
  Background counts = 44.9
  Rate = 0.008 +/- 0.001

[Fri May 18 09:23:01 2012] Off-axis axis estimate = 2.54'
[Fri May 18 09:27:56 2012] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Fri May 18 09:27:56 2012] Initial guess for spatial extent in simple fitting = 7.70"
[Fri May 18 09:27:56 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.777
[Fri May 18 09:27:56 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 7.70"
[Fri May 18 12:58:44 2012] fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_src16.ximg exists
[Fri May 18 12:58:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_src16.csv
[Fri May 18 12:58:44 2012] fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_src16_1.ximg exists
[Fri May 18 12:58:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_src16.csv
[Fri May 18 12:58:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 12:58:45 2012] fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Fri May 18 12:58:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src16.csv
[Fri May 18 12:58:45 2012] fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Fri May 18 12:58:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src16.csv
[Fri May 18 12:58:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 19:05:53 2012] Spatial fit model total counts = 1202.230000, observed total counts = 743.000000
[Fri May 18 19:05:53 2012] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 18 19:05:53 2012] Vigneting correction estimate = 1.000000
[Fri May 18 19:05:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 19:05:53 2012] Assessing source extent using major
[Fri May 18 19:05:53 2012] Source does appear to be extended
[Fri May 18 19:05:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 19:06:22 2012] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Fri May 18 19:06:22 2012] Initial guess for spatial extent in simple fitting = 7.70"
[Fri May 18 19:06:22 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.777
[Fri May 18 19:06:22 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 7.70"
[Fri May 18 21:23:53 2012] fullrun_pn_xmm0503750301_pi300-10000_cl_pass1_src10.ximg exists
[Fri May 18 21:23:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503750301_pi300-10000_cl_pass1_src10.csv
[Fri May 18 21:23:53 2012] fullrun_pn_xmm0503750301_pi300-10000_cl_pass1_src10_1.ximg exists
[Fri May 18 21:23:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503750301_pi300-10000_cl_pass1_src10.csv
[Fri May 18 21:23:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503750301_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503750301_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 21:23:54 2012] fullrun_pn_xmm0503750301_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Fri May 18 21:23:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503750301_pi300-10000_cl_pass1_tfrozen_src10.csv
[Fri May 18 21:23:54 2012] fullrun_pn_xmm0503750301_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Fri May 18 21:23:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503750301_pi300-10000_cl_pass1_tfrozen_src10.csv
[Fri May 18 21:23:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503750301_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503750301_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 06:33:37 2012] Spatial fit model total counts = 1135.300000, observed total counts = 743.000000
[Sat May 19 06:33:37 2012] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 19 06:33:37 2012] Spatial fit model total counts = 2104.370000, observed total counts = 4274.000000
[Sat May 19 06:33:37 2012] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 19 06:33:37 2012] Vigneting correction estimate = 1.000000
[Sat May 19 06:33:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 06:33:37 2012] Assessing source extent using major
[Sat May 19 06:33:37 2012] Source does appear to be extended
[Sat May 19 06:33:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 06:33:49 2012] XMMSAS src. selection expression = ellipse(25582.449249, 28943.543762, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 19 06:33:49 2012] Writing source region out to fullrun_pn_xmm0503750301_pi300-10000_pass1_cl_src17_src.reg
[Sat May 19 06:33:49 2012] Extracting stamp from image fullrun_pn_xmm0503750301_pi300-10000_cl_sm2.00.img.gz, (257, 296) - (332, 371)
[Sat May 19 06:33:49 2012] XMMSAS bgd. selection expression = annulus(25582.449249, 28943.543762, 1087.500000, 2175.000000, X, Y) && !ellipse(27353.106800, 27327.606400, 1878.193982, 1878.193982, 0.000000, X, Y) && !ellipse(26663.938263, 28828.931458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27301.633820, 28781.565735, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28795.056000, 29100.620000, 1316.680038, 1316.680038, 356.529000, X, Y) && !ellipse(24019.600769, 27870.588013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27111.619600, 25133.454000, 1791.968052, 1791.968052, 0.000000, X, Y)
[Sat May 19 06:33:49 2012] Writing fullrun_pn_xmm0503750301_pi300-10000_pass1_cl_src17.gif
[Sat May 19 06:53:31 2012] Mean detx,y = (-1639.96, -1474.17) 
[Sat May 19 06:53:34 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 19 06:54:05 2012] Binned source spectrum to 10 counts/bin
[Sat May 19 06:54:05 2012] Setting source spectrum file to fullrun_pn_xmm0503750301_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat May 19 06:54:05 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503750301_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sat May 19 09:41:35 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 19 09:41:35 2012] rmf not generated due to insufficient counts
[Sat May 19 21:44:45 2012] Updating aperture counts using extracted products
[Sat May 19 21:44:45 2012] Error reading totcts from fullrun_pn_xmm0503750301_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat May 19 21:44:46 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 19 21:44:46 2012] Using photon index=1.80, rate=0.00822, arf fullrun_pn_xmm0503750301_pi300-10000_pass1_cl_src17.arf
[Sat May 19 21:44:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 19 21:44:46 2012] Updating source flux to 3e-14
[Sat May 19 21:46:34 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting